ISO 1942-4:1989/Amd 1:1992

IS0
INTERNATIONAL
1942-4
STANDARD
Second edition
Deuxihme hdition
NORME
1989-07-01
AMENDMENT 1
INTERNATIONALE
AMENDEMENT 1
1992-08-01
Dental vocabulary -
Part 4 :
Dental equipment
AMENDMENT 1
Vocabulaire de l’art dentaire -
Partie 4 :
Materiel dentaire
AMENDEMENT 1
Reference number
Numho de r6fflrence
IS0 1942-4 : 1989/Amd.l : 1992 (E/F)

---------------------- Page: 1 ----------------------
IS0 1942-4 : 1989/Amd.l : 1992 (E/F)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
International organizations, govern-
the right to be represented on that committee.
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission 1 IECI on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for voting. Publication as an International Standard requires
approval by at least 75 % of the member bodies casting a vote.
Amendment 1 to International Standard IS0 1942-4 : 1989 was prepared by Technical
Committee ISO/TC 106, DenWry, Sub-Committee SC 3, Terminology.
IS0 1942 consists of the following parts, under the general title Dental vocabulary:
-
Part 7: General and clinical terms
-
Part 2: Dental materials
-
Part 3: Dental instruments
Part 4: Dental equipment
-
Part 5: Terms associated with testing
@ IS0 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher./Droits de reproduction reserves. Aucune partie de cette publication
ne peut etre reproduite ni utilisee sous quelque forme que ce soit et par aucun procede, electroni-
que ou mecanique, y compris la photocopie et les microfilms, sans l’accord ecrit de l’editeur.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland / Imprime en Suisse
ii

---------------------- Page: 2 ----------------------
IS0 1942-4 : 1989/Amd.l : 1992 (E/F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une federation mondiale
d’organismes nationaux de normalisation komites membres de I’ISO). L’elaboration
des Normes internationales est en general confide aux comites techniques de I’ISO.
Chaque comite membre interesse par une etude a le droit de faire par-tie du comite
technique tree a cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent egalement aux travaux. L’ISO col-
labore etroitement avec la Commission electrotechnique internationale KEI) en ce qui
concerne la normalisation ele
...