iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 24438:2023

(Main)

Ships and marine technology — Maritime education and training — Maritime career guidance

Ships and marine technology — Maritime education and training — Maritime career guidance

This document provides a powerful decision-making tool for persons that either have clear professional development goals or uncertainties related to the progression of their career paths, including minimum education and training requirements for many of the maritime-related occupations. It aims to assist candidates to take the necessary steps to meet their goals. This document seeks to assist professionals in (or those who would like to enter) the maritime sector, on board or ashore, in determining their professional goals, establishing how to achieve them through this proactive tool, taking into consideration: — personal circumstances and academic background; — previous work experience, knowledge and skills; — short, medium and long-term ambitions; — changing education and training requirements resulting from continual industry evolution; — current and future job opportunities, — impact of technology, and — shifting personal interests, attitudes, abilities, and goals. This document helps identify many of the potential jobs within the maritime industry, on board and ashore, in order to provide alternative career paths.

Navires et technologie maritime — Éducation et formation maritime — Recommandations pour l’orientation dans les métiers de la mer

General Information

Status
Published
Publication Date
30-Nov-2023
ICS
03.180 - Education
47.020.01 - General standards related to shipbuilding and marine structures
Technical Committee
ISO/TC 8 - Ships and marine technology
Drafting Committee
ISO/TC 8 - Ships and marine technology
Current Stage
6060 - International Standard published
Start Date
01-Dec-2023
Due Date
18-Aug-2023
Completion Date
01-Dec-2023
Ref Project

Relations

Revises
ISO/PAS 24438:2020 - Ships and marine technology — Maritime education and training — Maritime career guidance
Effective Date
06-Jun-2022

Buy Standard

ISO 24438:2023 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:1. 12. 2023ISO 24438:2023 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:1. 12. 2023
PreviousNext
Standard
ISO 24438:2023 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:1. 12. 2023
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023
PreviousNext
Draft
ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023REDLINE ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023
PreviousNext
Draft
REDLINE ISO/PRF 24438 - Ships and marine technology — Maritime education and training — Maritime career guidance Released:6. 10. 2023
English language
16 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 24438
First edition
2023-12
Ships and marine technology —
Maritime education and training —
Maritime career guidance
Navires et technologie maritime — Éducation et formation maritime
— Recommandations pour l’orientation dans les métiers de la mer
Reference number
ISO 24438:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 24438:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24438:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Basic concept of maritime career guidance . 1
4.1 General . 1
4.2 Major fields of employment in the international maritime industry . 2
4.3 Non-traditional field career paths in the maritime industry . 2
4.3.1 General . 2
4.3.2 Emerging technologies in support of operations . 2
4.3.3 “Hawse pipe” progression . 2
4.3.4 Application of computer technologies in all aspects of the maritime industry . 3
4.3.5 Military to maritime industry . 3
4.4 Personal career course charting . 3
4.5 Areas of potential employment in the maritime industry . 3
5 Information on selected occupations in the maritime industry .4
Bibliography .17
iii
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 24438:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-gov
...

INTERNATIONAL ISO
STANDARD 24438
First edition
Ships and marine technology —
Maritime education and training —
Maritime career guidance
Navires et technologie maritime — Éducation et formation maritime
— Recommandations pour l’orientation dans les métiers de la mer
PROOF/ÉPREUVE
Reference number
ISO 24438:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 24438:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24438:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Basic concept of maritime career guidance . 1
4.1 General . 1
4.2 Major fields of employment in the international maritime industry . 2
4.3 Non-traditional field career paths in the maritime industry . 2
4.3.1 General . 2
4.3.2 Emerging technologies in support of operations . 2
4.3.3 “Hawse pipe” progression . 2
4.3.4 Application of computer technologies in all aspects of the maritime industry . 3
4.3.5 Military to maritime industry . 3
4.4 Personal career course charting . 3
4.5 Areas of potential employment in the maritime industry . 3
5 Information on selected occupations in the maritime industry .4
Bibliography .16
iii
© ISO 2023 – All rights reserved PROOF/ÉPREUVE

---------------------- Page: 3 ----------------------
ISO 24438:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organiz
...

ISO/PRF 24438:2023(E)
Style Definition: Heading 1: Indent: Left: 0 pt, First
line: 0 pt, Tab stops: Not at 21.6 pt
2023-08-11
Style Definition: Heading 2: Font: Bold, Tab stops: Not
ISO TC 8/WG 14
at 18 pt
DATE: 2023-xx
Style Definition: Heading 3: Font: Bold
Secretariat: SAC
Style Definition: Heading 4: Font: Bold
Ships and marine technology — Maritime education and training — Maritime career guidance Style Definition: Heading 5: Font: Bold
Navires et technologie maritime — Éducation et formation maritime — Recommandations pour Style Definition: Heading 6: Font: Bold
l’orientation dans les métiers de la mer
Style Definition: ANNEX
Style Definition: AMEND Terms Heading: Font: Bold
Style Definition: AMEND Heading 1 Unnumbered:
Font: Bold
Style Definition: List Bullet: Indent: Left: 0 pt, Hanging:
18 pt, No bullets or numbering, Tab stops: 18 pt, List
tab
Style Definition: List Bullet 2: Indent: Left: 14.15 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
32.15 pt, List tab
Style Definition: List Bullet 3: Indent: Left: 28.3 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
46.3 pt, List tab
Style Definition: List Bullet 4: Indent: Left: 42.45 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
60.45 pt, List tab
Style Definition: List Bullet 5: Indent: Left: 56.6 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
74.6 pt, List tab
Style Definition: List Number: Indent: Left: 0 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
18 pt, List tab
Style Definition: List Number 5: Indent: Left: 56.6 pt,
Hanging: 18 pt, No bullets or numbering, Tab stops:
74.6 pt, List tab
Formatted: French (Switzerland)
Formatted: French (Switzerland)

---------------------- Page: 1 ----------------------
ISO/PRF 24438:2023(E)
© ISO 2023
Commented [eXtyles1]: The reference is to a withdrawn
standard which has been replaced

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
ISO 20344, Personal protective equipment — Test methods
part of this publication may be reproduced or utilized otherwise in any form or by any means,
for footwear
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
Commented [eXtyles2]: The reference is to a withdrawn
prior written permission. Permission can be requested from either ISO at the address below or
standard which has been replaced
ISO’s member body in the country of the requester.

ISO 20344, Personal protective equipment — Test methods
ISO copyright office for footwear
Formatted: Pattern: Clear
CP 401 • Ch. de Blandonnet 8
Formatted: Pattern: Clear
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 24438:2023(E)
Contents
Foreword . Error! Bookmark not defined.
Introduction . Error! Bookmark not defined.
1 Scope . Error! Bookmark not defined.
2 Normative references . Error! Bookmark not defined.
3 Terms and definitions . Error! Bookmark not defined.
4 Basic concept of maritime career guidance . Error! Bookmark not defined.
4.1 General . Error! Bookmark not defined.
4.2 Major fields of employment in the international maritime industry Error! Bookmark
not defined.
4.3 Non-traditional field career paths in the maritime industry . Error! Bookmark not
defined.
4.3.1 General . Error! Bookmark not defined.
4.3.2 Emerging technologies in support of operations . Error! Bookmark not defined.
4.3.3 “Hawse pipe” progression . Error! Bookmark not defined.
4.3.4 Application of computer technologies in all aspects of the maritime industry . Error!
Bookmark not defined.
4.3.5 Military to maritime industry. Error! Bookmark not defined.
4.4 Personal career course charting . Error! Bookmark not defined.
4.5 Areas of potential employment in the maritime industry . Error! Bookmark not
defined.
5 Information on selected occupations in the maritime industry . Error! Bookmark not
defined.
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 21978:2023(Main)
Air to water heat pumps — Testing and rating at part load conditions and calculation of seasonal coefficient of performance for space heating

This document specifies test conditions for determining the seasonal performance characteristics of air to water heat pumps for space heating with electrically driven compressors with or without supplementary heater. In the case of air to water heat pumps for space heating consisting of several parts with refrigerant or water connections, this document applies only to those designed and supplied as a complete package. The seasonal coefficient of performance depends, inter alia, on the climate conditions and temperature regime of the space heating distribution network. This document specifies: — three design conditions, each of them being characterized by a design temperature which represents the lowest temperature that can occur in that design condition; — three water temperature distribution regimes, namely “temperature application” in the text. This document also provides a full description of three heating seasons that can be used with the associated design conditions.

  • Standard
    50 pages
    English language
    sale 15% off
  • Draft
    49 pages
    English language
    sale 15% off
  • Draft
    49 pages
    English language
    sale 15% off
ISO
ISO 3951-6:2023(Main)
Sampling procedures for inspection by variables — Part 6: Specification for single sampling plans for isolated lot inspection indexed by limiting quality (LQ)

This document specifies an acceptance sampling system of single sampling plans for inspection by variables, primarily designed for use under the following conditions: a) where the inspection procedure is applied to an isolated lot of discrete products all supplied by one producer using one production process; b) where only a single quality characteristic, x, of this process is taken into consideration, which is measurable on a continuous scale; c) where the quality characteristic, x, is distributed according to a normal distribution or a close approximation to a normal distribution; d) where the quality characteristic can be measured without error or with moderate measurement error; e) where a contract or standard defines a lower specification limit, L, an upper specification limit, U, or both; an item is qualified as conforming if and only if its measured quality characteristic, x, satisfies the appropriate one of the following inequalities: 1) x ≥ L (i.e. the lower specification limit is not violated); 2) x ≤ U (i.e. the upper specification limit is not violated); 3) x ≥ L and x ≤ U (i.e. neither the lower nor the upper specification limit is violated). Inequalities 1) and 2) are cases with a single specification limit, whereas inequality 3) is a case with double specification limits. Where double specification limits apply, it is assumed in this document that conformance to both specification limits is equally important to the integrity of the product. In such cases, it is appropriate to apply a single LQ to the combined fraction of a product outside the two specification limits. This is referred to as combined control.

  • Standard
    80 pages
    English language
    sale 15% off
  • Draft
    82 pages
    English language
    sale 15% off
  • Draft
    82 pages
    English language
    sale 15% off
ISO
ISO 16478:2023(Main)
Thermal insulation products — Vacuum insulation panels (VIPs) — Specification

This document: — defines requirements for vacuum insulation panels (VIPs) with silica or glass fibre core, which are used for thermal insulation of buildings; — outlines required product properties, their performance, test methods and rules for conformity evaluations, identification and labelling; — provides a test method to determine ageing factors and the influence of the linear thermal bridges at the edges. This document is applicable to all types of silica and glass fibre core VIPs, independent of the type of envelope. In the case of a glass fibre core VIP, it is only applicable to VIPs with desiccants whose service life is ≥ 25 years. This document is not applicable to: — any specific installation and application requirements; — products intended to be used for the insulation of building equipment and industrial installations.

  • Standard
    52 pages
    English language
    sale 15% off
  • Draft
    52 pages
    English language
    sale 15% off
  • Draft
    52 pages
    English language
    sale 15% off
ISO
ISO 8256:2023(Main)
Plastics — Determination of tensile-impact strength

1.1 This document specifies two methods (method A and method B) for the determination of the tensile-impact strength of plastics under defined conditions. The tests can be described as tensile tests at relatively high strain rates. These methods can be used for rigid materials (as defined in ISO 472), but are especially useful for materials too flexible or too thin to be tested with impact tests conforming to the ISO 179 series or ISO 180. 1.2 These methods are used for investigating the behaviour of specified specimens under specified impact velocities, and for estimating the brittleness or the toughness of specimens within the limitations inherent in the test conditions. 1.3 These methods are applicable both to specimens prepared from moulding materials and to specimens taken from finished or semi-finished products (for example mouldings, laminates, or extruded or cast sheets). 1.4 Results obtained by testing moulded specimens of different dimensions are not necessarily the same. Equally, it is possible that specimens cut from moulded products will not give the same results as specimens of the same dimensions moulded directly from the material. Test results obtained from specimens prepared from moulding compounds cannot be applied directly to mouldings of any given shape, because values may depend on the design of the moulding and the moulding conditions. Results obtained by method A and method B can or can not be comparable. 1.5 These methods are not suitable for use as a source of data for design calculations on components. Information on the typical behaviour of a material can be obtained, however, by testing different types of test specimen prepared under different conditions, and by testing at different temperatures. The two different methods are suitable for production control as well as for quality control.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
  • Draft
    17 pages
    French language
    sale 15% off
ISO
ISO 12643-4:2023(Main)
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems

This document deals with all significant hazards, hazardous situations or hazardous events relevant to converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see Clause 5), when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This document is applicable to converting equipment not covered by other parts of ISO 12643. This document is not applicable to the machinery or machinery components manufactured before the date of its publication.

  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    81 pages
    French language
    sale 15% off
  • Draft
    80 pages
    English language
    sale 15% off
  • Draft
    80 pages
    English language
    sale 15% off
  • Draft
    84 pages
    French language
    sale 15% off
ISO
ISO/IEC 27033-7:2023(Main)
Information technology – Network security — Part 7: Guidelines for network virtualization security

This document aims to identify security risks of network virtualization and proposes guidelines for the implementation of network virtualization security. Overall, this document intends to considerably aid the comprehensive definition and implementation of security for any organization’s virtualization environments. It is aimed at users and implementers who are responsible for the implementation and maintenance of the technical controls required to provide secure virtualization environments.

  • Standard
    23 pages
    English language
    sale 15% off
  • Draft
    23 pages
    English language
    sale 15% off
  • Draft
    23 pages
    English language
    sale 15% off
ISO
ISO 12643-1:2023(Main)
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements

This document provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems, corrugated board manufacturing systems and stand‑alone platen presses. It is applicable to equipment used in stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system. The requirements given in this document are applicable to the equipment covered by ISO 12643 (all parts), unless otherwise noted. This document is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment. This document addresses recognized significant hazards specific to equipment and systems in the following areas: — mechanical; — electrical; — slipping, tripping, falling; — ergonomics; — noise; — UV and laser radiation; — fire and explosion; — thermal; — substances and material used for processing; — failure, malfunction of control system; — other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.]. This document is not applicable to: — equipment manufactured before the date of its publication; — ordinary office equipment for digital printing and paper processing, such as digital printers, copiers, sorters, binders and staplers, which is intended for use outside the printing and paper industry; — winder-slitters and sheeters in paper finishing (sheeters with unwinders); — office-type collating machines equipped with friction feeders; — mail processing machines; — machines used for filling packages (such as machines for shaping, filling, and closing the package); and — textile printing presses. The safety principles established in this document can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643 (all parts).

  • Standard
    110 pages
    English language
    sale 15% off
  • Standard
    121 pages
    French language
    sale 15% off
  • Draft
    110 pages
    English language
    sale 15% off
  • Draft
    111 pages
    English language
    sale 15% off
  • Draft
    111 pages
    English language
    sale 15% off
  • Draft
    120 pages
    French language
    sale 15% off
  • Draft
    122 pages
    French language
    sale 15% off
ISO
ISO 4266-2:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels

This document gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, transported aboard marine vessels (i.e. tankers and barges). This document gives guidance for buyers and sellers who mutually agree to use marine ALGs for either fiscal and/or custody transfer applications. This document is not applicable to the measurement of level in refrigerated cargo tanks. NOTE For information on the measurement of level in refrigerated cargo tanks, please see ISO 18132-1 and ISO 18132-3.

  • Standard
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off
  • Draft
    12 pages
    English language
    sale 15% off
ISO
ISO/PAS 5672:2023(Main)
Robotics — Collaborative applications — Test methods for measuring forces and pressures in human-robot contacts

This document specifies methods of measuring forces and pressures in physical human-robot contacts. It also specifies methods for analyzing the measured forces and pressures. It further specifies the characteristics of pressure-force measurement devices (PFMD). This document applies to collaborative applications deployed in an industrial or service environment for professional use. This document does not apply to non-professional robots (i.e. consumer robots) or medical robots, although the measurement methods presented can be applied in these areas, if deemed appropriate. Additionally, this document does not apply to organizational aspects for performing contact measurements (e.g. responsibilities or data management), assessment of other mechanical contact types (e.g. friction or shearing), assessment of other contact-related hazards (e.g. falling, electrical or chemical hazards). Further, this document does not set requirements for specific PFMD-design or specify methods to identify contact hazards.

  • Technical specification
    41 pages
    English language
    sale 15% off
  • Draft
    41 pages
    English language
    sale 15% off
  • Draft
    41 pages
    English language
    sale 15% off