ISO 3652:1975
(Main)Shipbuilding - Inland vessels - Rope reels
Shipbuilding - Inland vessels - Rope reels
Specifies the characteristics of rope reels intended for the storage of mooring and towing ropes in vessels of all types and purposes for use on inland waterways.
Construction navale — Bateaux de navigation intérieure — Tourets à câble
General Information
Relations
Overview - ISO 3652:1975 (Shipbuilding - Inland vessels - Rope reels)
ISO 3652:1975 specifies the characteristics and basic dimensions of rope reels intended for the storage of mooring and towing ropes on vessels operating on inland waterways. Published by ISO’s Technical Committee ISO/TC 8 (Shipbuilding), this standard defines sizing conventions, construction notes and a designation format to promote consistent production and interchangeability of rope reels used in inland navigation.
Key topics and requirements
- Scope and purpose
- Applies to rope reels for mooring and towing ropes in vessels of all types and purposes on inland waterways.
- Dimensions and units
- Dimensions are given in millimetres. The standard includes nominal reel dimensions and corresponding drum and stand lengths.
- Examples in the document: nominal reels 300 × 380 (drum length 380 mm, stand length 460 mm) and 300 × 700 (drum length 700 mm, stand length 780 mm).
- Construction
- Typical execution: welded of steel tubes and sheet steel. The standard gives construction characteristics but does not prescribe a single design; drawings or figures are illustrative only (the figure “does not determine the design”).
- Designation
- Provides a simple designation format for ordering and reference (example: Reel 300 × 380).
- Standardization intent
- Ensures consistent physical characteristics so reels from different manufacturers can meet common installation and operational needs on inland vessels.
Applications - who uses ISO 3652 and why
- Shipbuilders and naval architects specifying rope storage equipment for inland vessels.
- Equipment manufacturers producing rope reels for mooring and towing lines.
- Vessel operators, inland waterway fleets and maintenance teams requiring standardized replacement parts.
- Procurement and classification bodies verifying equipment conformity and interoperability.
- Dockyards and retrofitting projects where standard dimensions simplify installation and spare-part management.
Practical benefits include improved safety and ergonomics for mooring/towing operations, easier sourcing and replacement of reels, and reduced design ambiguity when integrating rope storage into vessel layouts.
Related standards
- Prepared by ISO/TC 8 (Shipbuilding); users may also consult other ISO shipbuilding and mooring equipment standards for complementary requirements (installation, materials, testing and certification).
- When applying ISO 3652, cross-reference applicable national regulations and classification society rules for inland navigation.
Keywords: ISO 3652, rope reels, inland vessels, shipbuilding, mooring ropes, towing ropes, reel dimensions, welded steel construction, reel designation.
Standards Content (Sample)
INTERNATIONAL STANDARD
3652e
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXk’AYHAPOfiHAII OPI-AHM3AUM5i I-IO CTAHjIIAPTM3ALW4.ORGANISATION INTERNATIONALE DE NORMALISATION
Shipbuilding - Inland vessels - Rope reels
Cons truc tion navaie - Bateaux de navigation intkrieure - Tourets 2 cable
First edition - 1975-12-15
UDC 629.122 : 677.72 Ref. No. ISO 3652-1975 (E)
Descriptors : shipbuilding, inland navigation, reels, specifications, dimensions.
Price based on 1 page
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 3652 was drawn up by Technical Committee ISO/TC 8,
Shipbuilding, and circulated to the Member Bodies in Dece
...
NORME INTERNATIONALE.
,
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPf-AHM3ALWiII II0 CTAHAAPTM3ALViM *ORGANISATION INTERNATIONALE DE NORMALISATION
- Bateaux de navigation intérieure -
Construction navale
Tourets à câble
Shipbuilding - lnland vessels - Rope reels
Première édition - 1975-12-15
CDU 629.122 : 677.72 Réf. no : 60 3652-1975 (F)
Descripteurs : construction navale, navigation fluviale, dévidoir, spécification, dimension.
Prix basé sur 1 page
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3652 a été établie par le Comité Technique ISO/TC 8,
Construction Navale, et soumise aux Comités Membres en décembre 1974,
Elle a é
...
NORME INTERNATIONALE.
,
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPf-AHM3ALWiII II0 CTAHAAPTM3ALViM *ORGANISATION INTERNATIONALE DE NORMALISATION
- Bateaux de navigation intérieure -
Construction navale
Tourets à câble
Shipbuilding - lnland vessels - Rope reels
Première édition - 1975-12-15
CDU 629.122 : 677.72 Réf. no : 60 3652-1975 (F)
Descripteurs : construction navale, navigation fluviale, dévidoir, spécification, dimension.
Prix basé sur 1 page
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3652 a été établie par le Comité Technique ISO/TC 8,
Construction Navale, et soumise aux Comités Membres en décembre 1974,
Elle a é
...
Frequently Asked Questions
ISO 3652:1975 is a standard published by the International Organization for Standardization (ISO). Its full title is "Shipbuilding - Inland vessels - Rope reels". This standard covers: Specifies the characteristics of rope reels intended for the storage of mooring and towing ropes in vessels of all types and purposes for use on inland waterways.
Specifies the characteristics of rope reels intended for the storage of mooring and towing ropes in vessels of all types and purposes for use on inland waterways.
ISO 3652:1975 is classified under the following ICS (International Classification for Standards) categories: 47.060 - Inland navigation vessels. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 3652:1975 has the following relationships with other standards: It is inter standard links to ISO 8442-5:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 3652:1975 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...