ISO 7607:1984
(Main)Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities
Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities
Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins, water areas of ports and terminals.
Construction navale — Navigation intérieure — Dragues à godets multiples — Échelle des capacités des godets
General Information
Relations
Overview
ISO 7607:1984 - Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities defines a standardized series of bucket capacities for multi-bucket dredgers used in inland navigation. Published by ISO Technical Committee ISO/TC 8 (Shipbuilding and marine structures) in 1984, the standard provides a common basis for specifying and harmonizing bucket volumes for dredgers operating in rivers, canals, lakes, water storage basins and water areas of ports and terminals.
Key Topics
- Scope and field of application: Applies to multi-bucket dredgers used for inland waterways and port water areas to support standardization of dredger details.
- Scale of bucket capacities: Presents a series of bucket capacities expressed in cubic decimetres (dm3) intended as a reference scale for design and procurement.
- Definition of bucket capacity: Explicitly defines bucket capacity as the total volume of liquid contained in the bucket when filled to the upper cutting edges, measured in cubic decimetres.
- Standardization intent: Provides a consistent capacity scale to support interoperable design, manufacturing, and selection of bucket systems for inland dredging equipment.
Applications
ISO 7607 is practical for professionals involved in inland dredging and shipbuilding who need a common reference for bucket volume. Typical users and uses include:
- Dredger designers and shipbuilders selecting or sizing multi-bucket systems during vessel and equipment design.
- Dredging equipment manufacturers standardizing product lines and ensuring consistent capacity labeling.
- Port authorities and dredging contractors specifying bucket capacities in procurement documents and tenders.
- Maintenance and spare-parts planners ensuring compatibility when replacing buckets or retrofitting older dredgers.
- Regulatory bodies and classification societies referencing standardized capacity definitions in technical guidelines and inspections.
Using ISO 7607 helps optimize dredger performance by matching bucket capacity to site conditions (sediment type, depth, and production rates), improving interchangeability and simplifying logistics for inland dredging operations.
Related Standards (if applicable)
- Developed by ISO Technical Committee ISO/TC 8 (Shipbuilding and marine structures), ISO 7607 complements other shipbuilding and marine equipment standards that address design, safety, measurement, and procurement practices for dredging and inland navigation equipment. For comprehensive specification work, consult related ISO shipbuilding and marine equipment documents and national dredging guidelines.
Keywords: ISO 7607, multi-bucket dredgers, bucket capacities, inland navigation, dredger design, shipbuilding, dredging equipment.
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*MEX~YHAPO~HAR OPTAHM3AUMR IlO CTAH~APTI43AL(MM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Inland navigation - Multi-bucket
Shipbuilding -
dredgers - Scale of bucket capacities
Construe tion navale - Ataviga tion in tkrjeure - Dragues 5 godets multiples - helIe des capact?& des godets
First edition - 1984-07-15
UDC 629.122 : 627.748 : 621.879443 Ref. No. IS0 7607-1984 (E)
iii
cn
Descriptors : shipbuilding, inland waterways, inland navigation, dredgers, bucket conveyors, load capacity.
tn
Price based on 1 page
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7607 was developed by Technical Committee lSO/TC 8,
Shipbuilding and marine structures, and was circulated to the
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIK&YHAPOAHAR OPt-AHM3AUMR l-l0 CTAHAAPTkl3ALWl.ORGANISATlON INTERNATIONALE DE NORMALISATION
Construction navale - Navigation intérieure - Dragues
à godets multiples - Échelle des capacités des godets
Shipbuilding - lnland navigation - M&i-bucket dredgers - Scale of bucket capacities
Première édition - 1984-07-15
CDU 629.122 : 627.748 : 621.879.443
Réf. no : ISO 76074984 (F)
îî
-
Descripteurs : construction navale, voie d’eau, navigation fluviale, drague, transporteur à godets, capacité de charge.
s!?
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7607 a été élaborée par le comité technique ISO/TC 8,
Construction navale et structures maritimes, et a été soumise aux comités membres en
novembre 1982.
Les comit
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIK&YHAPOAHAR OPt-AHM3AUMR l-l0 CTAHAAPTkl3ALWl.ORGANISATlON INTERNATIONALE DE NORMALISATION
Construction navale - Navigation intérieure - Dragues
à godets multiples - Échelle des capacités des godets
Shipbuilding - lnland navigation - M&i-bucket dredgers - Scale of bucket capacities
Première édition - 1984-07-15
CDU 629.122 : 627.748 : 621.879.443
Réf. no : ISO 76074984 (F)
îî
-
Descripteurs : construction navale, voie d’eau, navigation fluviale, drague, transporteur à godets, capacité de charge.
s!?
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7607 a été élaborée par le comité technique ISO/TC 8,
Construction navale et structures maritimes, et a été soumise aux comités membres en
novembre 1982.
Les comit
...
Frequently Asked Questions
ISO 7607:1984 is a standard published by the International Organization for Standardization (ISO). Its full title is "Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities". This standard covers: Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins, water areas of ports and terminals.
Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins, water areas of ports and terminals.
ISO 7607:1984 is classified under the following ICS (International Classification for Standards) categories: 47.060 - Inland navigation vessels. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 7607:1984 has the following relationships with other standards: It is inter standard links to ISO 11562:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 7607:1984 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...