iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 5483:1977

(Main)

Shipbuilding - Oil and water drain screws

Shipbuilding - Oil and water drain screws

Specifies basic dimensions and materials for drain screws situated at the bottom of oil and water tanks.

Construction navale — Bouchon de vidange de mazout et d'eau

General Information

Status
Withdrawn
Publication Date
30-Jun-1977
Withdrawal Date
30-Jun-1977
ICS
47.020.30 - Piping systems
Technical Committee
ISO/TC 8/SC 3 - Piping and machinery
Drafting Committee
ISO/TC 8/SC 3 - Piping and machinery
Current Stage
9599 - Withdrawal of International Standard
Start Date
05-Feb-2003
Completion Date
13-Dec-2025
Ref Project

Relations

Revised
ISO 5483:2003 - Ships and marine technology - Drain facilities from oil and water tanks
Effective Date
15-Apr-2008
ISO 5483:1977 - Shipbuilding -- Oil and water drain screwsISO 5483:1977 - Shipbuilding -- Oil and water drain screws
PreviousNext
Standard
ISO 5483:1977 - Shipbuilding -- Oil and water drain screws
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eauISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eau
PreviousNext
Standard
ISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eau
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eauISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eau
PreviousNext
Standard
ISO 5483:1977 - Construction navale -- Bouchon de vidange de mazout et d'eau
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 5483:1977 is a standard published by the International Organization for Standardization (ISO). Its full title is "Shipbuilding - Oil and water drain screws". This standard covers: Specifies basic dimensions and materials for drain screws situated at the bottom of oil and water tanks.

Specifies basic dimensions and materials for drain screws situated at the bottom of oil and water tanks.

ISO 5483:1977 is classified under the following ICS (International Classification for Standards) categories: 47.020.30 - Piping systems. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 5483:1977 has the following relationships with other standards: It is inter standard links to ISO 5483:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 5483:1977 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEX~YHAPOLIHAII OPl-AHM3AUMR no flAHAAPTW3AUWW .ORGANISATION INTERNATIONALE DE NORMALISATION
Shipbuilding - Oil and water drain screws
Cons truc tion na vale - Bouchon de vidange de mazout et d’eau
First edition - 1977-07-01
Ref. No. ISO 5483-1977 (E)
UDC 629.12.011.524/.525 : 621.6.057
Descriptors : shipbuilding, bunkers, emtying devices, drain plugs, specifications, dimensions.
Price based on 2 pages
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 5483 was developed by Technical Committee
lSO/TC 8, Shipbuilding, and was circulated to the member bedies in March 1976.
lt has been approved by the member bodies of the following countries :
India Romania
Belgium
Ireland
Bulgaria Spain
Sweden
Czechoslovakia Italy
Japan Turkey
Denmark
Norway United Kingdom
Finland
Germany Philippines Yugoslavia
The member bod ies of the fo Ilowing countries expressed disapproval of the
document on technica grounds :
Australia
Brazil
France
Netherlands
Poland
0 International Organkation for Standardkation, 1977 l
Printed
...


NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPO~HA~ OPI-AHW3ALUM I-l0 CTAHAAPTM3ALWi.ORGANISATION INTERNATIONALE DE NORMALISATION
Construction navale - Bouchon de vidange de mazout et
d’eau
Shipbuilding - Oit and water drain screws
Première édition - 1977-07-01
iî
-
Réf. no : ISO 5483-1977 (F)
CDU 629.12.011.524/.525 : 621.6.057
P
construction navale, soute, dispositif de vidange, bouchon de nable, spécification, dimension
Descripteurs :
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5483 a été élaborée par le comité technique
ISO/TC 8, Construction navale, et a été soumise aux comités membres en
mars 1976.
Les comités membres des pays suivants l’ont approuvée :
Allemagne Inde Roumanie
Belgique Irlande Royaume-Uni
Bulgarie Italie Suède
Danemark Japon Tchécoslovaquie
Espagne Norvège Turquie
Finlande Philippines Yougoslavie
membres des pays suivants l’ont désapprouvée pour des raisons
Les comités
tech niques :
Australie
Brésil
France
Pays-Bas
Pologne
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
...


NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXAYHAPO~HA~ OPI-AHW3ALUM I-l0 CTAHAAPTM3ALWi.ORGANISATION INTERNATIONALE DE NORMALISATION
Construction navale - Bouchon de vidange de mazout et
d’eau
Shipbuilding - Oit and water drain screws
Première édition - 1977-07-01
iî
-
Réf. no : ISO 5483-1977 (F)
CDU 629.12.011.524/.525 : 621.6.057
P
construction navale, soute, dispositif de vidange, bouchon de nable, spécification, dimension
Descripteurs :
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 5483 a été élaborée par le comité technique
ISO/TC 8, Construction navale, et a été soumise aux comités membres en
mars 1976.
Les comités membres des pays suivants l’ont approuvée :
Allemagne Inde Roumanie
Belgique Irlande Royaume-Uni
Bulgarie Italie Suède
Danemark Japon Tchécoslovaquie
Espagne Norvège Turquie
Finlande Philippines Yougoslavie
membres des pays suivants l’ont désapprouvée pour des raisons
Les comités
tech niques :
Australie
Brésil
France
Pays-Bas
Pologne
@ Organisation internationale de normalisation, 1977 l
Imprimé en Suisse
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 17579:2025(Main)
Ships and marine technology - Design and testing requirements of pneumatic quick-closing valves

This document specifies requirements for the design and tests of pneumatic driven quick-closing valves, used in ship fuel and lubricating oil systems to stop the fluid flow in the event of a leak. This document is applicable to valves of nominal diameter (DN): 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, and 300, corresponding to nominal pipe sizes (NPS): 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 5, 6, 8, 10, and 12. NOTE This document is mainly intended for use by producers. Onboard ship inspection and maintenance after the delivery and installation of the valve can help ensure continued proper performance.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 5483:2023(Main)
Ships and marine technology - Drain facilities from oil and water tanks

This document specifies the dimensions and materials for welding rings and drain screws of drain facilities situated at the bottom of oil and water tanks. Oil and water tanks occur as: - built-in tanks, as an integrated part of the hull structure; and - detachable tanks, located in appropriate rooms and compartments. This document covers facilities for both instances.

  • Standard
    36 pages
    English language
    sale 15% off
ISO
ISO 24224:2022(Main)
Ships and marine technology - Tanker cargo manifold shore connection - Technical requirements

This document specifies the types, structure, dimensions and technical requirements of manifolds for oil and chemical tankers. It applies to the cargo and vapour piping systems for the transfer of cargoes of oil or chemical tankers. NOTE This document can be also be applied to the design of bunker (ship fuel) transfer system manifolds for oil or chemical tankers at terminals. ISO 23212 is generally applicable to flanged connections for bunker fuel and lubricating oil transfer to ships from supply vessels or onshore facilities.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 20602:2019/Amd 1:2021(Amendment)
Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements - Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 23212:2021(Main)
Ships and marine technology - Flange connection for fuel and lubrication oil bunkering - Basic dimensions and technical requirements

This document specifies the basic dimensions of PN 10 flanged connections for bunker fuel and lubricating oil transfer to ships from bunkering vessels or onshore facilities, and the technical requirements for the design of such connections. This document is not applicable to connections of the ship's fuel system for the reception of liquefied natural gas.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 15364:2021(Main)
Ships and marine technology - Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks

This document is applicable to pressure-vacuum valves and to devices to prevent the passage of flame, both protecting cargo tanks, that can be subject to explosive gas/vapour and/or to gas/vapour pressure or vacuum beyond the design parameters of the system/tank. It specifies the minimum requirements for performance and testing. It also specifies design and in-service performance criteria, operational testing and maintenance requirements. Design or manufacturing in accordance with this document does not imply suitability for any given installation, it indicates that certain minimum requirements have been considered and that information necessary for determination of suitability is provided to the buyer of the equipment. The flame test procedures of ISO 16852:2016 are incorporated in this document. NOTE Minimum requirements for devices to prevent the passage of flame are found in the International Maritime Organization (IMO) "International Convention for the Safety of Life at Sea, as amended" (SOLAS), Chapter II-2, Regulation 4, and IMO Maritime Safety Committee (MSC) Circular No. 677 (MSC/Circ. 677), "Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers", as amended.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    36 pages
    French language
    sale 15% off
ISO
ISO 21562:2020(Main)
Ships and marine technology - Bunker fuel mass flow meters on receiving vessel - Requirements

This document specifies requirements for Coriolis mass flow meter (MFM) systems installed on and used by vessels for the accurate measurement of bunker fuels received. It defines metrology and security requirements as well as testing requirements of the MFM system for the receiving vessel. This document complements ISO 8217, ISO 22192 and OIML R117. This document does not cover mass flow meters used for custody transfer, nor does it address overall bunker delivery procedural issues, such as delivery system integrity and transfer operations. It is not applicable to cryogenic fuels such as LNG. For bunker delivery using a Coriolis mass flow meter system in a custody transfer role, refer to ISO 22192.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 23055:2020(Main)
Ships and marine technology - Design requirements for international ballast water transfer connection flange

This document specifies the material requirements and dimensions of an international flange for the transfer of ballast water between a ship and a shore reception facility, or between ships. It does not address any reconfiguration of the ship's ballast water piping system necessary to connect to the shore-side, e.g. construction of piping from the ship lower machinery levels to the main deck transfer area.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 19037:2019(Main)
Ships and marine technology - Gate valves for use in low temperature applications - Design and testing requirements

This document specifies requirements of design, manufacture, and test methods for cryogenic gate valves to have excellent quality of leakage stability in very low temperature environments (−50 °C to −196 °C).

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 20602:2019(Main)
Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements

This document specifies requirements of design, manufacture, and test methods for cryogenic check valves to have excellent quality of leakage stability in very low temperature environments (−50 °C to −196 °C).

  • Standard
    14 pages
    English language
    sale 15% off