ISO 17651-1:2024
(Main)Simultaneous interpreting — Interpreters’ working environment — Part 1: Requirements and recommendations for permanent booths
Simultaneous interpreting — Interpreters’ working environment — Part 1: Requirements and recommendations for permanent booths
This document specifies requirements and recommendations for the design of permanent booths for simultaneous interpreting in new or existing buildings. This document also ensures the usability and accessibility of booths for all interpreters. This document is to be used in conjunction with ISO 20109, which contains requirements and recommendations for the equipment necessary for simultaneous interpreting. For requirements and recommendations for permanent booths which do not have a direct view of the room in which a communicative event takes place, see ISO 17651-3.[1] [1] Under preparation. Stage at the time of publication: ISO/CD 17651-3-2:2024.
Interprétation simultanée — Environnement de travail des interprètes — Partie 1: Exigences et recommandations pour les cabines permanentes
Le présent document spécifie les exigences et recommandations relatives à la conception de cabines permanentes d’interprétation simultanée dans des bâtiments neufs ou existants. Ce document garantit également la facilité d’utilisation et l’accessibilité des cabines pour tous les interprètes. Le présent document est destiné à être utilisé conjointement avec l’ISO 20109, qui contient les exigences et recommandations relatives à l’équipement nécessaire pour l’interprétation simultanée. Pour les exigences et recommandations relatives aux cabines permanentes qui n’ont pas une vue directe sur la salle dans laquelle a lieu l’événement de communication, voir l’ISO 17651-3[1]. [1] En cours d’élaboration. Stade au moment de la publication: ISO/CD 17651-3.2:2024.
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17651-1
ISO/TC 37/SC 5
Simultaneous interpreting —
Secretariat: DIN
Interpreters’ working environment —
Voting begins on:
2023-09-27
Part 1:
Voting terminates on:
Requirements and recommendations
2023-11-22
for permanent booths
Interprétation simultanée — Environnement de travail des
interprètes —
Partie 1: Exigences et recommandations pour les cabines
permanentes
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 17651-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
ISO/FDIS 17651-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17651-1
ISO/TC 37/SC 5
Simultaneous interpreting —
Secretariat: DIN
Interpreters’ working environment —
Voting begins on:
Part 1:
Voting terminates on:
Requirements and recommendations
for permanent booths
Interprétation simultanée — Environnement de travail des
interprètes —
Partie 1: Exigences et recommandations pour les cabines
permanentes
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 17651-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
ISO/FDIS 17651-1:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Location . 3
4.1 Room characteristics . 3
4.2 Siting and visibility . 3
4.3 Accessibility . 4
4.4 Technical control and technical support staff . 4
5 Design .
...
© ISO 2023 – All rights reserved
ISO/DIS FDIS 17651--1:2023(E)
Date: 2023-04-19
ISO/TC 37/SC 5
Secretariat: DIN
Date: 2023-09-13
Simultaneous interpreting — Interpreter’sInterpreters’ working
environment —
Part 1:
Requirements and recommendations for permanent booths
Interprétation simultanée — Environnement de travail des interprètes —
Partie 1: Exigences et recommandations pour les cabines permanentes
FDIS stage
---------------------- Page: 1 ----------------------
ISO/DISFDIS 17651-1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland.
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DISFDIS 17651-1:2023(E)
Contents
Foreword . vii
Introduction . ix
Part 1: Requirements and recommendations for permanent booths . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Location . 4
4.1 Room characteristics . 4
4.2 Siting and visibility . 4
4.3 Accessibility . 4
4.4 Technical control and technical support staff . 5
5 Design . 5
5.1 General requirements . 5
5.2 Dimensions . 5
5.3 Doors . 7
5.4 Windows . 7
5.5 Acoustics . 9
5.5.1 Sound insulation . 9
5.5.2 Sound absorption . 10
5.6 Heating, ventilation and air conditioning .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.