Thermocouples - Part 1: EMF specifications and tolerances

IEC 60584-1:2013 specifies reference functions and tolerances for letter-designated thermocouples (Types R, S, B, J, T, E, K, N, C and A). Temperatures are expressed in degrees Celsius based on the International Temperature Scale of 1990, ITS-90 (symbol t90), and the EMF (symbol E) is in microvolts. The reference functions are polynomials which express the EMF, E in V, as a function of temperature t90 in °C with the thermocouple reference junctions at 0 °C. Values of EMF at intervals of 1 °C are tabulated in Annex A. This third edition cancels and replaces the second edition published in 1995 and constitutes a technical revision. It includes the following changes:
- IEC 60584-1:1995 and IEC 60584-2:1982 have been merged;
- the standard is now explicitly based on the reference polynomials which express thermocouple EMF as functions of temperature. The tables derived from the polynomials are given in Annex A;
- inverse polynomials expressing temperature as functions of EMF are given in Annex B, but inverse tables are not given;
- the range of the polynomial relating the EMF of Type K thermocouples is restricted to 1 300 °C;
- values of the Seebeck coefficients are given at intervals of 10 °C;
- thermoelectric data (EMF and Seebeck coefficients) are given at the fixed points of the ITS-90;
- some guidance is given in Annex C regarding the upper temperature limits and environmental conditions of use for each thermocouple type.

Couples thermoélectriques - Partie 1: Spécifications et tolérances en matière de FEM

La CEI 60584-1:2013 spécifie les fonctions de référence et les tolérances associées aux couples thermoélectriques désignés par une lettre (Types R, S, B, J, T, E, K, N, C et A). Les températures y sont exprimées en degrés Celsius selon l'Échelle Internationale de Température de 1990, EIT-90 (symbole t90) et les FEM (symbole E), en microvolts. Les fonctions de référence sont des polynômes qui expriment la FEM, E en V, en fonction de la température t90 en °C, les jonctions de référence des couples thermoélectriques étant placées à 0 °C. L'Annexe A présente, sous forme de tableau, les valeurs de la FEM tous les 1 °C. Cette troisième édition annule et remplace la deuxième édition parue en 1995. Elle constitue une révision technique. Elle inclut les modifications suivantes:
- les CEI 60584-1:1995 et CEI 60584-2:1982 ont été fusionnées;
- la norme repose désormais de manière explicite sur les polynômes de référence qui expriment la FEM des couples thermoélectriques en fonction de la température. L'Annexe A donne les tables dérivées des polynômes;
- l'Annexe B donne les polynômes inverses, qui expriment la température en fonction de la FEM, mais ne donne pas les tables inverses;
- le domaine de température du polynôme exprimant la FEM des couples thermoélectriques de Type K est limité à 1 300 °C;
- la valeur du coefficient de Seebeck est donnée tous les 10 °C;
- les données thermoélectriques (FEM et coefficients de Seebeck) sont fournies aux points fixes de l'EIT-90;
- l'Annexe C donne des lignes directrices concernant les limites supérieures de température et les conditions d'environnement lors de l'utilisation de chaque Type de couple thermoélectrique.

General Information

Status
Published
Publication Date
27-Aug-2013
Current Stage
PPUB - Publication issued
Start Date
15-Sep-2013
Completion Date
28-Aug-2013
Ref Project

Buy Standard

Standard
IEC 60584-1:2013 - Thermocouples - Part 1: EMF specifications and tolerances
English and French language
136 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60584-1 ®
Edition 3.0 2013-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Thermocouples –
Part 1: EMF specifications and tolerances

Couples thermoélectriques –
Partie 1: Spécifications et tolérances en matière de FEM

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60584-1 ®
Edition 3.0 2013-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Thermocouples –
Part 1: EMF specifications and tolerances

Couples thermoélectriques –
Partie 1: Spécifications et tolérances en matière de FEM

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 17.200.20 ISBN 978-2-8322-1047-5

– 2 – 60584-1 © IEC:2013
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Terms and definitions . 7
3 Thermocouple designations . 8
4 EMF – Temperature reference functions . 9
5 Thermocouple tolerances . 14
6 Thermoelectric values at the fixed points of the ITS-90 . 15
Annex A (informative) Tables for EMF as a function of temperature . 17
Annex B (informative) Inverse polynomial functions . 57
Annex C (informative) Guidance on the selection of thermocouples . 64
Bibliography . 68

Table 1 – Thermocouple types . 9
Table 2 – Type R reference function . 10
Table 3 – Type S reference function . 11
Table 4 – Type B reference function . 11
Table 5 – Type J reference function . 11
Table 6 – Type T reference function . 12
Table 7 – Type E reference function . 12
Table 8 – Type K reference function . 13
Table 9 – Type N reference function . 13
Table 10 – Type C reference function . 14
Table 11 – Type A reference function . 14
Table 12 – Thermocouple tolerances . 15
Table 13 – EMF and Seebeck coefficients of the thermocouples at the fixed points of
the ITS-90 (EMF: upper row, Seebeck coefficient: lower row) . 16
Table A.1 – Type R: Platinum - 13 % rhodium / platinum (1 of 5) . 17
Table A.2 – Type S: Platinum-10 % rhodium / platinum (1 of 5) . 21
Table A.3 – Type B: Platinum-30 % rhodium / platinum-6 % rhodium (1 of 4) . 26
Table A.4 – Type J: Iron / copper-nickel (1 of 4) . 30
Table A.5 – Type T: Copper / copper-nickel (1 of 2) . 34
Table A.6 – Type E: Nickel-chromium / copper-nickel (1 of 3) . 36
Table A.7 – Type K: Nickel-chromium / nickel-aluminium (1 of 4) . 39
Table A.8 – Type N: Nickel-chromium-silicon / nickel-silicon (1 of 4) . 43
Table A.9 – Type C: Tungsten-5 % rhenium / tungsten-26 % rhenium (1 of 5) . 47
Table A.10 – Type A: Tungsten-5 % rhenium / tungsten-20 % rhenium (1 of 5) . 52
Table B.1 – Type R Inverse function coefficients . 58
Table B.2 – Type S Inverse function coefficients . 59
Table B.3 – Type B Inverse function coefficients . 59
Table B.4 – Type J Inverse function coefficients . 60
Table B.5 – Type T Inverse function coefficients . 60

60584-1 © IEC:2013 – 3 –
Table B.6 – Type E Inverse function coefficients . 61
Table B.7 – Type K Inverse function coefficients . 61
Table B.8 – Type N Inverse function coefficients . 62
Table B.9 – Type C Inverse function coefficients . 62
Table B.10 – Type A Inverse function coefficients . 63
Table C.1 – Recommended maximum temperature of use, t / °C . 64
max
Table C.2 – Environmental recommendations and limitations of the conductors . 66
Table C.3 – Neutron irradiation effects . 67

– 4 – 60584-1 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
THERMOCOUPLES –
Part 1: EMF specifications and tolerances

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.