IEC 61162-1:2010/COR1:2013
(Corrigendum)Corrigendum 1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
Corrigendum 1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
General Information
Relations
Standards Content (Sample)
IEC 61162-1
(Fourth edition – 2010)
Maritime navigation and radiocommunication equipment and systems –
Digital interfaces –
Part 1: Single talker and multiple listeners
CO RRI G E NDUM 1
Subclau
...
This May Also Interest You
IEC 62065:2025 specifies the minimum operational and performance requirements, test methods and required test results conforming to performance standards adopted by the IMO in resolution MSC.74(69) Annex 2 Recommendation on Performance Standards for Track Control Systems. In addition, it takes into account IMO resolution A.694(17) to which IEC 60945 is associated. It also takes into account IMO resolution MSC.302(87) on bridge alert management (BAM), to which IEC 62923-1 and IEC 62923-2 are associated.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alert management has been brought in line with MSC.302(87), IEC 62923-1 and IEC 62923‑2, reducing the number of alerts for one situation and improving the information provided by alerts. An overview is provided in Annex F;
b) the previous Annex F has been removed as it was outdated and not instrumental in this document;
c) the requirements in Clause 5 have been further detailed:
d) the structure of Clause 6 has been updated.
- Standard109 pagesEnglish languagesale 15% off
- Standard115 pagesFrench languagesale 15% off
- Standard224 pagesEnglish and French languagesale 15% off
IEC 61097-7:2025 specifies the minimum performance requirements, technical characteristics and test methods with required test results for VHF radio installations capable of voice communication and digital selective calling as required by chapter IV of the International Convention for Safety of Life at Sea (SOLAS).
This document incorporates the applicable part of the performance standards included in IMO Resolution A.524(13) and MSC.511(105), the technical characteristics included in Recommendation ITU-R M.489-2 and Recommendation ITU-R M.493-16, and takes account of IMO Resolution A.694(17) which is associated with IEC 60945, and conforms with the ITU Radio Regulations where applicable.
When a requirement in this document is different from IEC 60945, the requirement in this document shall take precedence.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been updated to incorporate the provisions of the new IMO performance standards given in Resolution MSC.511(105) and new ITU-R recommendations given in M.493-16;
b) the provisions for digital selective calling which were previously in IEC 61097-3 have been incorporated;
c) the provisions for watch keeping receivers which were previously in IEC 61097-8 have been incorporated;
d) new requirements have been added for a received signal strength indicator in 4.3.4 and for software maintenance in 4.6 in support of IMO recommendations;
e) new Annex B and Annex E have been added for bridge alert management;
f) new Annex C and Annex D have been added for digital selective calling;
g) a new Annex F has been added for remote control operation;
h) a new Annex G has been added for equipment manuals.
- Standard147 pagesEnglish languagesale 15% off
IEC 61097-9:2025 specifies the minimum operational and performance requirements and test methods with required test results for transmitters and receivers capable of voice communication and digital selective calling for the GMDSS operating in either the medium frequency band only or in medium and high frequency bands allocated in the ITU Radio Regulations to the Maritime Mobile Service, as required by Chapter IV of SOLAS 1974 as amended. It is based on IMO resolution MSC.512(105) and takes account of Recommendation ITU-R M.493 for digital selective calling including the automatic connection system.
This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been updated to incorporate the provisions of the new IMO performance standards given in Resolution MSC.512(105) and new ITU-R recommendations given in M.493-16. These provisions in particular add new requirements for reception of maritime safety information and for the automatic connection system;
b) the provisions for digital selective calling which were previously in IEC 61097-3 have been incorporated;
c) the provisions for watch keeping receivers which were previously in IEC 61097-8 have been incorporated;
d) new requirements have been added for software maintenance in 4.10 in support of IMO recommendations;
e) new Annex A, Annex B and Annex C have been added for digital selective calling;
f) new Annex D and Annex G have been added for bridge alert management;
g) new Annex E and Annex I have been added for maritime safety information;
h) a new Annex F has been added for the automatic connection system;
i) a new Annex H has been added for equipment manuals;
j) a new Annex J has been added for remote control operation;
k) previous Annex A, Annex B and Annex C have been deleted as they are no longer relevant.
- Standard218 pagesEnglish languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 62288:2021 specifies the general requirements, methods of testing, and required test results, for the presentation of navigation-related information on shipborne navigational displays in support of IMO resolutions MSC.191(79) as amended by MSC.466(101) in June 2019, and where applicable MSC.302(87). This document also supports the guidelines included in the related IMO Circulars MSC.1/Circ.1609 on the standardization of user interface design for navigation equipment and SN.1/Circ.243 as revised in June 2019 on the presentation of navigation related symbols, terms, and abbreviations. This document also specifies the presentation of AIS data reports and the AIS Application Specific Messages defined for international use in IMO SN.1/Circ.289 and intended to be received by a ship for display onboard.
- Standard585 pagesEnglish languagesale 15% off
- Standard374 pagesEnglish languagesale 15% off
- Standard384 pagesEnglish and French languagesale 15% off
IEC 61162-460:2024 is an add-on to IEC 61162-450 where higher safety and security standards are needed, for example due to higher exposure to external threats or to improve network integrity. This document provides requirements and test methods for equipment to be used in an IEC 61162-460 compliant network as well as requirements for the network itself and requirements for interconnection from the network to other networks. This document also contains requirements for a redundant IEC 61162-460 compliant network. This document does not introduce new application level protocol requirements to those that are defined in IEC 61162-450.
- Standard1 pageEnglish languagesale 15% off
IEC 61162-450:2024 specifies interface requirements and methods of test for high speed communication between shipboard navigation and radiocommunication equipment as well as between such systems and other ship systems that need to communicate with navigation and radio-communication equipment. This document is based on the application of an appropriate suite of existing international standards to provide a framework for implementing data transfer between devices on a shipboard Ethernet network.
- Standard309 pagesEnglish languagesale 15% off
- Standard205 pagesEnglish and French languagesale 15% off
IEC 61162-460:2024 is an add-on to IEC 61162-450 where higher safety and security standards are needed, for example due to higher exposure to external threats or to improve network integrity. This document provides requirements and test methods for equipment to be used in an IEC 61162-460 compliant network as well as requirements for the network itself and requirements for interconnection from the network to other networks. This document also contains requirements for a redundant IEC 61162-460 compliant network. This document does not introduce new application level protocol requirements to those that are defined in IEC 61162-450.
The contents of the corrigendum of July 2024 have been included in this copy.
- Standard91 pagesEnglish languagesale 15% off
- Standard193 pagesEnglish languagesale 15% off
IEC 61162-2:2024 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate interface. This document is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and can include any information as specified by approved sentences or information coded according to the rules for proprietary sentences. Typical messages can be from 11 to a maximum of 79 characters in length and generally require repetition rates up to once per 20 ms. The electrical definitions in this document are intended to accommodate higher data rates than are specified in IEC 61162-1. Since there is no provision for guaranteed delivery of messages and only limited error-checking capability, it is important this document is used with caution in all safety applications.
- Standard53 pagesEnglish languagesale 15% off
- Standard24 pagesEnglish and French languagesale 15% off
IEC 61162-1:2024 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This document is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and can include information such as position, speed, depth, frequency allocation, etc. Typical messages can be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this document are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, it is important this document is used with caution in all safety applications. For applications where a faster transmission rate is necessary, IEC 61162-2 applies. For applications to shore based equipment of the automatic identification system (AIS) the IEC 62320 series applies.
- Standard589 pagesEnglish languagesale 15% off
- Standard385 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...