IEC 61199:2011
(Main)Single-capped fluorescent lamps - Safety specifications
Single-capped fluorescent lamps - Safety specifications
IEC 61199:2011 specifies the safety requirements for single-capped fluorescent lamps for general lighting purposes of all groups havingcaps according to Table 1. It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given in this standard. This third edition cancels and replaces the second edition published in 1999. It constitutes a technical revision. Main technical changes are the introduction of requirements for high frequency operation, a new temperature measurement position and few new cap-holder fits.
Lampes à fluorescence à culot unique - Specifications de sécurité
La CEI 61199:2011 spécifie les exigences de sécurité pour les lampes à fluorescence à culot unique, destinées à l'éclairage général, de tous les groupes ayant des culots conformes au Tableau 1. Elle spécifie aussi la méthode qu'il convient qu'un fabricant utilise pour démontrer la conformité de ses produits aux exigences de la présente norme, méthode basée sur l'évaluation de la qualité de la production globale, associée aux résultats d'essais enregistrés sur les produits finis. Cette méthode peut aussi être appliquée à des fins de certification. Des précisions sont également données, dans la présente norme, sur la procédure de contrôle par lot qui peut être utilisée pour l'appréciation limitée de la qualité des lots. Cette troisième édition annule et remplace la deuxième édition parue en 1999. Elle constitue une révision technique. Les principales modifications techniques concernent l'introduction d'exigences relatives au fonctionnement à haute fréquence, d'un nouvel emplacement pour la mesure de la température ainsi que de quelques changements au niveau des ensembles culot/douille.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61199 ®
Edition 3.0 2011-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61199 ®
Edition 3.0 2011-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 29.140.30 ISBN 978-2-88912-570-8
– 2 – 61199 © IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 8
3 Terms and definitions . 8
4 Safety requirements . 10
4.1 General . 10
4.2 Marking . 10
4.3 Mechanical requirements for caps . 10
4.3.1 Construction and assembly . 10
4.3.2 Dimensional requirements for caps . 10
4.3.3 Pin connections and keying configurations . 11
4.4 Insulation resistance . 11
4.5 Electric strength . 11
4.6 Parts which can become accidentally live . 11
4.7 Resistance to heat and fire . 12
4.8 Creepage distance for caps . 13
4.9 Lamp cap temperature rise . 13
4.10 Radio interference suppression capacitors . 14
4.10.1 General . 14
4.10.2 Moisture resistance . 14
4.10.3 Resistance to flame and ignition . 15
4.11 UV radiation . 15
4.12 Information for luminaire design . 15
4.13 Information for ballast design . 15
4.14 Information for lampholder design . 15
5 Assessment . 15
5.1 General . 15
5.2 Whole production assessment by means of the manufacturer’s records . 16
5.3 Assessment of the manufacturer’s records of particular tests . 20
5.4 Rejection conditions of batches . 20
5.5 Sampling procedures for whole production testing . 21
5.6 Sampling procedures for batch testing . 21
Annex A (normative) Tests for assessing caps for construction and assembly . 23
Annex B (normative) Maximum lamp cap temperature rise values and method of
measurement . 24
Annex C (informative) Information for luminaire design . 30
Annex D (normative) Conditions of compliance for design tests . 32
Annex E (normative) Cathode connection configurations . 33
Annex F (normative) Normal and abnormal lamp operation, lamp non-interchangeability
requirements . 35
Annex G (normative) Information for thermal tests . 37
Annex H (informative) Information for ballast design . 38
Annex I (informative) Information for lampholder design . 39
Bibliography . 41
61199 © IEC:2011 – 3 –
Figure 1 – Places where to measure the temperature . 14
Figure B.1 – Example for a test circuit for the measurement of the cap temperature rise
at maximum discharge current and maximum SoS . 25
Figure B.2 – Examples where to measure the temperature according to Clause B.2 . 27
Figure E.1 – Where to connect the cathodes of different caps . 34
Figure G.1 – Ball-pressure apparatus . 37
Table 1 – Sheet references of IEC 60061 . 7
Table 2 – Grouping of test records – Sampling and acceptable quality levels (AQL) . 17
Table 3 – Acceptance numbers AQL = 0,65 % . 18
Table 4 – Acceptance numbers AQL = 2,5 % . 19
Table 5 – Batch sample size and rejection number . 21
Table B.1 – Maximum cap temperature rise, lamps with internal or external starter (test
at abnormal operating conditions) . 28
Table B.2 – Maximum cap temperature rise, lamps for starterless operation (test at
normal operating conditions) . 29
Table C.1 – Maximum cap temperature, lamps with internal or external starter (test at
abnormal operating conditions). 30
Table C.2 – Maximum cap temperature, lamps for starterless operation (test at
normal operating conditions) . 31
Table F.1 – Maximum allowable currents and rated lamp power . 36
Table G.1 – Test temperatures . 37
Table I.1 – Temperature point . 39
Table I.2 – Maximum temperatures related to lampholder design . 40
– 4 – 61199 © IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SINGLE-CAPPED FLUORESCENT LAMPS –
SAFETY SPECIFICATIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international u
...
IEC 61199 ®
Edition 3.2 2014-07
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61199 ®
Edition 3.2 2014-07
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.30 ISBN 978-2-8322-1804-4
IEC 61199 ®
Edition 3.2 2014-07
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
– 2 – IEC 61199:2011
+AMD1:2012+AMD2:2014 CSV © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
INTRODUCTION to Amendment 1 . 7
1 Scope . 8
2 Normative references. 9
3 Terms and definitions . 9
4 Safety requirements . 11
4.1 General . 11
4.2 Marking . 11
4.3 Mechanical requirements for caps . 11
4.3.1 Construction and assembly . 11
4.3.2 Dimensional requirements for caps . 11
4.3.3 Pin connections and keying configurations . 12
4.3.4 System requirements . 12
4.4 Insulation resistance . 12
4.5 Electric strength . 12
4.6 Parts which can become accidentally live . 12
4.7 Resistance to heat and fire . 13
4.8 Creepage distance for caps . 14
4.9 Lamp cap temperature rise . 14
4.10 Radio interference suppression capacitors . 15
4.10.1 General . 15
4.10.2 Moisture resistance . 15
4.10.3 Resistance to flame and ignition . 16
4.11 UV radiation . 16
4.12 Information for luminaire design . 16
4.13 Information for ballast design . 16
4.14 Information for lampholder design . 16
5 Assessment . 16
5.1 General . 16
5.2 Whole production assessment by means of the manufacturer’s records . 17
5.3 Assessment of the manufacturer’s records of particular tests . 21
5.4 Rejection conditions of batches . 21
5.5 Sampling procedures for whole production testing . 22
5.6 Sampling procedures for batch testing . 22
Annex A (normative) Tests for assessing caps for construction and assembly . 24
Annex B (normative) Maximum lamp cap temperature rise values and method of
measurement . 26
Annex C (informative) Information for luminaire design . 32
Annex D (normative) Conditions of compliance for design tests . 34
Annex E (normative) Cathode connection configurations . 35
Annex F (normative) Normal and abnormal lamp operation, lamp non-interchangeability
requirements . 37
Annex G (normative) Information for thermal tests . 39
Annex H (informative) Information for ballast design . 40
+AMD1:2012+AMD2:2014 CSV © IEC 2014
Annex I (informative) Information for lampholder design . 41
Bibliography . 43
Figure 1 – Places where to measure the temperature . 15
Figure B.1 – Example for a test circuit for the measurement of the cap temperature rise
at maximum discharge current and maximum SoS . 27
Figure B.2 – Examples where to measure the temperature according to Clause B.2 . 29
Figure E.1 – Where to connect the cathodes of different caps . 36
Figure G.1 – Ball-pressure apparatus . 39
Table 1 – Sheet references of IEC 60061 . 8
Table 2 – Grouping of test records – Sampling and acceptable quality levels (AQL) . 18
Table 3 – Acceptance numbers AQL = 0,65 % . 19
Table 4 – Acceptance numbers AQL = 2,5 % . 20
Table 5 – Batch sample size and rejection number . 22
Table B.1 – Maximum cap temperature rise, lamps with internal or external starter (test
at abnormal operating conditions) . 30
Table B.2 – Maximum cap temperature rise, lamps for starterless operation (test at
normal operating conditions) . 31
Table C.1 – Maximum cap temperature, lamps with internal or external starter (test at
abnormal operating conditions). 32
Table C.2 – Maximum cap temperature, lamps for starterless operation (test at
normal operating conditions) . 33
Table F.1 – Maximum allowable currents and rate
...
IEC 61199 ®
Edition 3.1 2012-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61199 ®
Edition 3.1 2012-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Single-capped fluorescent lamps – Safety specifications
Lampes à fluorescence à culot unique – Spécifications de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX CN
ICS 29.140.30 ISBN 978-2-8322-0412-2
– 2 – 61199 © IEC:2011+A1:2012
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
INTRODUCTION TO THE AMENDMENT . 7
1 Scope . 8
2 Normative references. 9
3 Terms and definitions . 9
4 Safety requirements . 11
4.1 General . 11
4.2 Marking . 11
4.3 Mechanical requirements for caps . 11
4.3.1 Construction and assembly . 11
4.3.2 Dimensional requirements for caps . 11
4.3.3 Pin connections and keying configurations . 12
4.4 Insulation resistance . 12
4.5 Electric strength . 12
4.6 Parts which can become accidentally live . 12
4.7 Resistance to heat and fire . 13
4.8 Creepage distance for caps . 14
4.9 Lamp cap temperature rise . 14
4.10 Radio interference suppression capacitors . 15
4.10.1 General . 15
4.10.2 Moisture resistance . 15
4.10.3 Resistance to flame and ignition . 16
4.11 UV radiation . 16
4.12 Information for luminaire design . 16
4.13 Information for ballast design . 16
4.14 Information for lampholder design . 16
5 Assessment . 16
5.1 General . 16
5.2 Whole production assessment by means of the manufacturer’s records . 17
5.3 Assessment of the manufacturer’s records of particular tests . 21
5.4 Rejection conditions of batches . 21
5.5 Sampling procedures for whole production testing . 22
5.6 Sampling procedures for batch testing . 22
Annex A (normative) Tests for assessing caps for construction and assembly . 24
Annex B (normative) Maximum lamp cap temperature rise values and method of
measurement . 25
Annex C (informative) Information for luminaire design . 31
Annex D (normative) Conditions of compliance for design tests . 33
Annex E (normative) Cathode connection configurations . 34
Annex F (normative) Normal and abnormal lamp operation, lamp non-interchangeability
requirements . 36
Annex G (normative) Information for thermal tests . 38
61199 © IEC:2011+A1:2012 – 3 –
Annex H (informative) Information for ballast design . 39
Annex I (informative) Information for lampholder design . 40
Bibliography . 42
Figure 1 – Places where to measure the temperature . 15
Figure B.1 – Example for a test circuit for the measurement of the cap temperature rise
at maximum discharge current and maximum SoS . 26
Figure B.2 – Examples where to measure the temperature according to Clause B.2 . 28
Figure E.1 – Where to connect the cathodes of different caps . 35
Figure G.1 – Ball-pressure apparatus . 38
Table 1 – Sheet references of IEC 60061 . 8
Table 2 – Grouping of test records – Sampling and acceptable quality levels (AQL) . 18
Table 3 – Acceptance numbers AQL = 0,65 % . 19
Table 4 – Acceptance numbers AQL = 2,5 % . 20
Table 5 – Batch sample size and rejection number . 22
Table B.1 – Maximum cap temperature rise, lamps with internal or external starter (test
at abnormal operating conditions) . 29
Table B.2 – Maximum cap temperature rise, lamps for starterless operation (test at
normal operating conditions) . 30
Table C.1 – Maximum cap temperature, lamps with internal or external starter (test at
abnormal operating conditions). 31
Table C.2 – Maximum cap temperature, lamps for starterless operation (test at
normal operating conditions) . 32
Table F.1 – Maximum allowable currents and rated lamp power . 37
Table G.1 – Test temperatures . 38
Table I.1 – Temperature point . 40
Table I.2 – Maximum temperatures related to lampholder design . 41
– 4 – 61199 © IEC:2011+A1:2012
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SINGLE-CAPPED FLUORESCENT LAMPS –
SAFETY SPECIFICATIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.