iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61140

Protection contre les chocs électriques - Aspects communs aux installations et aux matériels

Protection contre les chocs électriques - Aspects communs aux installations et aux matériels

Applicable à la protection des personnes et des animaux contre les chocs électriques. Elle est destinée à donner des principes        fondamentaux et des prescriptions communes aux installations       électriques, aux systèmes et aux matériels, ou nécessaires à leur  coordination.                                                      Elaborée pour les installations, les systèmes et les matériels sans limite de tension.                                                  NOTE - Il y a des articles dans cette norme qui se réfèrent à des   systèmes, installations et matériels de basse tension et de haute   tension. Pour les besoins de cette norme, la basse tension est      n'importe quelle tension nominale jusqu'à et y compris 1 000 V en  courant alternatif ou 1 500 V en courant continu. La haute tension est n'importe quelle tension nominale dépassant 1 000 V en courant alternatif ou 1 500 V en courant continu.                          Les prescriptions de cette norme ne sont applicables que si elles  sont incluses ou sont référencées dans les normes concernées. Elle  n'est pas destinée à être utilisée seule.                           A le statut d'une publication fondamentale de sécurité conformément au Guide 104 de la CEI.                                            [
]Cette version française découle de la publication d'origine bilingue dont les pages anglaises ont été supprimées. Les numéros de page     manquants sont ceux des pages supprimées.

Protection contre les chocs électriques - Aspects communs aux installations et aux matériels

Protection against electric shock – Common aspects for installation and equipment

General Information

Status
Not Published
ICS
13.260 - Protection against electric shock. Live working
29.020 - Electrical engineering in general
91.140.50 - Electricity supply systems
Technical Committee
TC 64 - Electrical installations and protection against electric shock
Current Stage
PPUB - Publication issued
Start Date
10-Oct-2001
Ref Project
SIST IEC 61140:2000 - Protection against electric shock – Common aspects for installation and equipment

Buy Standard

IEC 61140:2000IEC 61140:2000
PreviousNext
Standard
IEC 61140:2000
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 61140:2000
01-februar-2000
Protection against electric shock – Common aspects for installation and
equipment
Protection against electric shock – Common aspects for installation and equipment
Protection contre les chocs électriques - Aspects communs aux installations et aux
matériels
Ta slovenski standard je istoveten z: IEC 61140
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST IEC 61140:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 61140:2000

---------------------- Page: 2 ----------------------

SIST IEC 61140:2000

---------------------- Page: 3 ----------------------

SIST IEC 61140:2000

---------------------- Page: 4 ----------------------

SIST IEC 61140:2000

---------------------- Page: 5 ----------------------

SIST IEC 61140:2000

---------------------- Page: 6 ----------------------

SIST IEC 61140:2000

---------------------- Page: 7 ----------------------

SIST IEC 61140:2000

---------------------- Page: 8 ----------------------

SIST IEC 61140:2000

---------------------- Page: 9 ----------------------

SIST IEC 61140:2000

---------------------- Page: 10 ----------------------

SIST IEC 61140:2000

---------------------- Page: 11 ----------------------

SIST IEC 61140:2000

---------------------- Page: 12 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61140:2016(Main)
Protection against electric shock - Common aspects for installation and equipment

IEC 61140:2016 is available as IEC 61140:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61140:2016 applies to the protection of persons and livestock against electric shock. The intent is to give fundamental principles and requirements which are common to electrical installations, systems and equipment or necessary for their coordination, without limitations with regard to the magnitude of the voltage or current, or the type of current, and for frequencies up to 1 000 Hz. It has the status of a basic safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2001 and Amendment 1:2004. This edition constitutes a technical revision.

  • Standard
    111 pages
    English and French language
    sale 15% off
IEC
IEC TS 61201:2007(Main)
Use of conventional touch voltage limits - Application guide

Provides guidance on the use of conventional touch voltage limits with reference to thresholds given in IEC 60479-5. Consideration is given to different physiological effects, environmental conditions, contact conditions, etc. This specification only discusses voltages for sinusoidal a.c. at 50/60 Hz and pure d.c. having no significant a.c. component. This specification does not consider immersion of body parts or medical applications. Touch voltage limits are for use by technical committees as guidance for the determination of their own specific limits. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition cancels and replaces the first edition which was issued as a technical report in 1992. It constitutes a technical revision and now has the status of a technical specification. The main changes with respect to the previous edition are listed below: - proposal of maximum contact areas for various conventional touch voltage limit; - introduction of different current pathways through the human body for the selection of conventional touch voltage limit; - introduction of conventional touch voltage limit corresponding to the startle reaction current threshold, the inability of let-go current threshold and the ventricular fibrillation current threshold; - possibility of interpolation on contact area for other conventional touch voltage limits. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.

  • Technical specification
    33 pages
    English and French language
    sale 15% off
IEC
IEC 61140:2016(Main)
Protection against electric shock - Common aspects for installation and equipment

IEC 61140:2016 is available as IEC 61140:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61140:2016 applies to the protection of persons and livestock against electric shock. The intent is to give fundamental principles and requirements which are common to electrical installations, systems and equipment or necessary for their coordination, without limitations with regard to the magnitude of the voltage or current, or the type of current, and for frequencies up to 1 000 Hz. It has the status of a basic safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2001 and Amendment 1:2004. This edition constitutes a technical revision.

  • Standard
    111 pages
    English and French language
    sale 15% off
IEC
IEC TS 61201:2007(Main)
Use of conventional touch voltage limits - Application guide

Provides guidance on the use of conventional touch voltage limits with reference to thresholds given in IEC 60479-5. Consideration is given to different physiological effects, environmental conditions, contact conditions, etc. This specification only discusses voltages for sinusoidal a.c. at 50/60 Hz and pure d.c. having no significant a.c. component. This specification does not consider immersion of body parts or medical applications. Touch voltage limits are for use by technical committees as guidance for the determination of their own specific limits. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This second edition cancels and replaces the first edition which was issued as a technical report in 1992. It constitutes a technical revision and now has the status of a technical specification. The main changes with respect to the previous edition are listed below: - proposal of maximum contact areas for various conventional touch voltage limit; - introduction of different current pathways through the human body for the selection of conventional touch voltage limit; - introduction of conventional touch voltage limit corresponding to the startle reaction current threshold, the inability of let-go current threshold and the ventricular fibrillation current threshold; - possibility of interpolation on contact area for other conventional touch voltage limits. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.

  • Technical specification
    33 pages
    English and French language
    sale 15% off
IEC
IEC 62870:2015(Main)
Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements

IEC 62870:2015 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting. The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 60384-23-1:2005(Main)
Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ

supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 60384-20-1:2008(Main)
Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ

IEC 60384-20-1:2008 is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60384-19-1:2006(Main)
Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ

is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

  • Standard
    13 pages
    English language
    sale 15% off
IEC
IEC TR 60721-4-1:2001+AMD1:2003 CSV(Main)
Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage

IEC 60721-4-1:2001+A1:2003 Deals with the correlation and transformation of the condition given in IEC 60721-3-1 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic, and biological and other effects, due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions.
This consolidated version consists of the first edition (2001) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Technical report
    91 pages
    English and French language
    sale 15% off
IEC
IEC TR 60721-4-4:2001(Main)
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations

IEC TR 60721-4-4:2001 Deals with the correlation and transformation of the conditions given in IEC 60721-3-4 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic and biological and other effects due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions.

  • Technical report
    49 pages
    English and French language
    sale 15% off