IEC 60688:2012/COR1:2013
(Corrigendum)Corrigendum 1 - Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
Corrigendum 1 - Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
Corrigendum 1 - Transducteurs électriques de mesure convertissant les grandeurs électriques alternatives ou continues en signaux analogiques ou numériques
General Information
Relations
Standards Content (Sample)
IEC 60688 IEC 60688
(Third edition – 2012) (Troisième édition – 2012)
Electrical measuring transducers for converting Transducteurs électriques de mesure
A.C. and D.C. electrical quantities to analogue or convertissant les grandeurs électriques
digital signals alternatives ou continues en signaux
analogiques ou numériques
CO RRI G E NDUM 1
...
This May Also Interest You
IEC TS 62586-3:2025 Describes a procedure used for maintenance tests of individual power quality instruments. Users of these instruments need to ensure the conformity of the individual power quality instrument for stationary use with the requirements of IEC 62586‑1. This is achieved by periodic maintenance tests as defined in this document.
- Technical specification26 pagesEnglish languagesale 15% off
IEC 63297:2025 provides a classification of NILM sensing devices for use in NILM systems, according to the state of the art of NILM technologies.
- Standard40 pagesEnglish and French languagesale 15% off
IEC 61554:2025 defines a system of dimensions for panel mounting of equipment. It is applicable to electrical and electrically operated indicating, recording and control instruments. The purpose of this document is to establish dimensional interchangeability between instruments made by different manufacturers.
- Standard29 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 61557-1:2019 specifies the general requirements applicable to measuring and monitoring equipment for testing the electrical safety in low-voltage distribution systems with nominal voltages up to 1 000 V AC and 1 500 V DC. When measuring equipment or measuring installations involve measurement tasks of various measuring equipment covered by this series of standards, then the part of this series relevant to each of the measurement tasks is applicable. Other parts of IEC 61557 can specify additional requirements or deviations. This document does not cover functional safety or cybersecurity. IEC 61557-1:2019 cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This third edition includes the following significant technical changes with respect to the previous edition:
a) terms aligned with IEC 60050;
b) measurement of uncertainty revised according to the equations in 4.2 of ISO/IEC Guide 98-3:2008 (GUM);
c) updated references for safety and EMC requirements;
d) updated references for marking and operating instructions;
e) updated references for testing safety and EMC;
f) Annex A contains an explanation of GUM;
g) Annex B addresses environmental aspects.
- Standard50 pagesEnglish languagesale 15% off
- Standard81 pagesEnglish languagesale 15% off
- Standard50 pagesEnglish and French languagesale 15% off
This part of IEC 61557 specifies the requirements for measuring equipment that combines several measuring functions or methods of testing, measuring or monitoring, that are in accordance with the respective parts of IEC 61557, into one piece of apparatus.
Measuring equipment which combines measuring functions or methods of testing, measuring or monitoring covered by the respective parts of IEC 61557 with those not covered by the respective parts of IEC 61557 is also within the scope of this document.
- Standard29 pagesEnglish languagesale 15% off
IEC 60688:2024 applies to transducers (TRD) with electrical inputs and outputs for making measurements of AC or DC electrical quantities. The output signal can be in the form of an analogue or digital signal.
This document applies to measuring transducers used for converting electrical quantities such as:
– current,
– voltage,
– active power,
– reactive power,
– power factor,
– phase angle,
– frequency,
– harmonics or total harmonic distortion,
– apparent power, and
– DC power
to an output signal.
This document applies
a) if the fundamental frequency of the input(s) lies between 0 Hz and 1 500 Hz,
b) to the electrical measuring transducer if it is part of a system for the measurement of an electrical or non-electrical quantity,
c) to transducers for use in a variety of applications such as telemetry and process control and in one of a number of defined environments.
This document is not applicable for:
– instrument transformers that comply with IEC 61869 (all parts),
– transmitters for use in an industrial process application that comply with IEC 60770 (all parts),
– power metering and monitoring devices (PMD) that comply with IEC 61557-12,
– meters that comply with the IEC 62053 series,
– handheld sensors,
– residual current monitoring devices (RCMs) that comply with IEC 62020-1,
– residual current detecting devices (RDC-DD) that comply with IEC 62955,
– in-cable control and protection devices (IC-CPDs) that comply with IEC 62752,
– modular residual current devices (MRCDs) that comply with IEC 60947 2:2016/AMD1:2019, Annex M.
Within the measuring range, the output signal is a function of the measurand. An auxiliary supply can be required.
This document is intended:
– to specify the terminology and definitions relating to transducers whose main application is in industry,
– to unify the test methods used in evaluating transducer performance,
– to specify accuracy limits and output values for transducers.
IEC 60688:2024 cancels and replaces the fourth edition published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) updating normative references;
b) updating definitions;
c) updating structure;
d) adding DC power measurement.
- Standard260 pagesEnglish and French languagesale 15% off
IEC TR 63519:2024 provides information on terminology and general concepts in the determination of measurement uncertainties (MU). It focuses on application aspects based on the example of IEC TC 85 (Measuring equipment for electrical and electromagnetic quantities) and shows the opportunities and implications for further use of measurement uncertainties.
Measurement uncertainties are relevant for metrological compatibility and metrological traceability. Therefore, information on the role of measurement uncertainty in decisions or conformity assessments is given.
References to documents, standards and guidelines are made but only key results will be stated.
- Technical report15 pagesEnglish languagesale 15% off
IEC 62974-1:2024 specifies product and performance requirements for devices that fall under the heading of "monitoring and measuring systems used for data collection, aggregation and analysis", for industrial, commercial, and similar use rated below or equal to 1 kV AC and 1,5 kV DC.
These devices are fixed and are intended to be used indoors as panel-mounted devices, or as modular devices fixed on a DIN rail, or as housing devices fixed on a DIN rail, or as devices fixed by other means inside a cabinet.
These devices are used to upload or download information (energy measured on loads, power metering and monitoring data, temperature information, etc.), mainly for energy efficiency purposes. These devices are known as energy servers (ESE), energy data loggers (EDL), data gateways (DGW) and I/O data concentrators (IODC) and are grouped together under the family name of Data Management Devices (DMD).
This document does not cover:
• devices used only in the consumer market (living quarters) or household;
• devices used in the smart metering infrastructure (e.g. smart meters);
• devices used in the smart grid infrastructure;
• devices used as IT servers in the information technology business;
• power metering and monitoring devices (PMD);
• I/O data concentrators already covered by a specific product standard;
• communication protocols and interoperability;
• power quality instruments (PQI);
• software used for the data collection and analysis of the power quality for the supply side.
IEC 62974-1:2024 cancels and replaces the first edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the performance criteria have been reviewed;
b) EMC and safety requirements have been improved;
c) mechanical requirements have been clarified and amended.
- Standard63 pagesEnglish and French languagesale 15% off
IEC 61557-14:2023 defines special requirements for test and measurement equipment used to determine the electrical safety of electrical equipment of machinery in accordance with IEC 60204-1.
This International Standard is to be used in conjunction with IEC 61557-1:2019.
IEC 61557-14:2023 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) clarifying the introduction;
b) replaced "dielectric strength" by "voltage test";
c) requirement for maximum output current has been added in 4.2.6.1;
d) tripping time at electrical switching activated by two-hand operation has been added in 4.2.6.1;
e) additional time limiting capability for the protection against electric shock for test persons and bystanders in 4.2.6.2;
f) updated references for safety testing;
g) alignment of the structure with that of the whole IEC 61557 series.
- Standard33 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...