iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60384-9-1:1988/COR1:1999

(Corrigendum)

Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E

Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E

Corrigendum 1 - Condensateurs fixes utilisés dans les équipements électroniques. Neuvième partie: Spécification particulière-cadre: Condensateurs fixes à diélectrique en céramique de classe 2. Niveau d'assurance E

General Information

Status
Published
Publication Date
29-Apr-1999
Technical Committee
TC 40 - Capacitors and resistors for electronic equipment
Current Stage
DELPUB - Deleted Publication
Completion Date
19-May-2005
Ref Project

Relations

Revised
IEC 60384-9-1:2005 - Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
Effective Date
05-Sep-2023

Buy Standard

IEC 60384-9-1:1988/COR1:1999 - Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E Released:4/30/1999IEC 60384-9-1:1988/COR1:1999 - Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E Released:4/30/1999
PreviousNext
Standard
IEC 60384-9-1:1988/COR1:1999 - Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E Released:4/30/1999
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


Publication 60384-9-1 de la CEI IEC Publication 60384-9-1
(Première édition – 1988) (First edition – 1988)

Condensateurs fixes utilisés dans les Fixed capacitors for use in

équipements électroniques – electronic equipment –

Neuvième partie: Spécification particulière- Part 9: Blank detail specification:

cadre: Condensateurs fixes à diélectrique en Fixed ca
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC/IEEE 62582-1:2024(Main)
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General

IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
IEC
IEC/IEEE 63332-387:2024(Main)
Nuclear facilities - Electrical power systems - Diesel generator units applied as standby power sources

IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.

  • Standard
    139 pages
    English and French language
    sale 15% off
IEC
IEC TR 63368:2024(Main)
Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing

IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests.
This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies.
In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.

  • Technical report
    30 pages
    English language
    sale 15% off
IEC
IEC 62899-301-3:2024(Main)
Printed Electronics - Part 301-3: Equipment - Contact printing - Rigid master - Method to measure the shape errors of printing plate rollers

IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error.
This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.

  • Standard
    24 pages
    English language
    sale 15% off
IEC
IEC TR 63484:2024(Main)
Guidance on fungus resistance of optical fibre cables

IEC TR 63484:2024 information about fungal growth on the outer sheath of optical fibre cables and on the inner components of the cable. It also provides guidance for specifying fungus resistance performance of optical cable outer sheath and internal cable components, including recommendations for fungus resistance test method as well as evaluation after test.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to hybrid telecommunication cables having a combination of both optical fibres and electrical conductors.
Since conditions suitable for fungal growth include high relative humidity and a warm atmosphere, the document is applicable to optical cables intended for transportation, storage and use under such environment over certain period, for instance, some days at least.

  • Technical report
    15 pages
    English language
    sale 15% off
IEC
IEC TS 63331:2024(Main)
Electric dishwashers for household use - Methods for measuring the microbiological efficacy of the dishwashing process

IEC TS 63331:2024 applies to electric dishwashers for household and similar use that are supplied with hot and/or cold water.
This document deals with measurement procedures regarding the reduction of microbial contamination resulting from the use of electric dishwashers for household and similar use.
This document specifies methods that enable reproducible measurements. These derived measurement results can only be used for a relative statement. Absolute statements, i.e. health-related claims or conclusions about prevention or treatment of a disease or health improvement, are reserved for explicit regulatory action after a medical assessment.
This document does not apply to appliances intended to be used in medical, veterinary, or pharmaceutical applications.
This document does not address sanitization, disinfection or sterilization measures.
The dishwashing process is a complex operation consisting of cleaning dish items and cleaning the dishwasher itself. This document only focusses on the dish items to be cleaned.

  • Technical specification
    32 pages
    English language
    sale 15% off
IEC
IEC 63145-22-20:2024/COR1:2024(Corrigendum)
Corrigendum 1 - Eyewear display - Part 22-20: Specific measurement methods for AR type - Image quality

IEC 63145-22-20:2024 specifies the standard measuring conditions and measurement methods for determining the image quality of augmented reality (AR) type eyewear displays. This document applies to see-through type (AR glasses) eyewear displays using virtual image optics.
See-through type displays (VR glasses), contact lens-type displays, and retina direct projection displays are out of the scope of this document.

  • Standard
    1 page
    English language
    sale 15% off
IEC
IEC TS 62271-319:2024(Main)
High-voltage switchgear and controlgear – Part 319: Alternating current circuit-breakers intended for controlled switching

IEC TS 62271-319:2024 is applicable to alternating current circuit-breakers with intentional non-simultaneous pole operation designed for indoor or outdoor installations and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. This document provides additional ratings and type tests to be conducted for this type of circuit-breaker and is intended to be used in conjunction with IEC 62271‑100:2021. Intentional non-simultaneous pole operation can be implemented by mechanical or electrical means and both methods are within the scope of this document.

  • Technical specification
    75 pages
    English language
    sale 15% off
IEC
IEC 60308:2024(Main)
Hydraulic turbines - Testing of governing systems

IEC 60308:2024 deals with the definition and the characteristics of control systems. It is not limited to the actual controller tasks but also includes other tasks which may be assigned to a control system, such as sequence control tasks, safety and provision for the actuating energy. The following systems are included, speed, power, opening, water level and flow control for all turbine types; electronic, electrical and fluid power devices; safety devices as well as start-up and shutdown devices. The significant technical changes introduced by the third edition are the adoption of parts of IEC 61362:2024 which deal with test matters and the introduction of new technical aspects.

  • Standard
    160 pages
    English and French language
    sale 15% off
IEC
IEC 61196-1-113:2024(Main)
Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant

IEC 61196-1-113:2024 applies to coaxial communications cables. It specifies a test method for determining the attenuation constant of coaxial cables for use in communications systems. The test is applicable preferably at frequencies ≥5 MHz but also for lower frequencies if the magnitude of the complex characteristic impedance is approximately equal to the nominal characteristic impedance of the test sample (TS) or if a form fitting function is applied.
This third edition cancels and replaces the second edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) add Clause 3 "Terms and definitions";
b) add Clause 4 "Test environment";
c) add Clause 5 "Preconditioning";
d) add Subclause 7.1 "General";
e) add detail test methods including 7.2 "long cable methods" and 7.3 "double-cable method";
f) add "Annex A Stability of attenuation constant at different temperatures";
g) add "Annex B Test examples of stability of attenuation constants at different temperature".

  • Standard
    16 pages
    English language
    sale 15% off