Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

IEC 60331-3:2009 specifies the test apparatus and procedure and gives the performance requirements, including recommended flame application times, for low-voltage power cables of rated voltage up to and including 0,6/1,0 kV, and control cables with a rated voltage which are required to maintain circuit integrity when tested in a metal enclosure and when subject to fire and mechanical shock under specified conditions. This standard describes the means of sample preparation, the continuity checking arrangements, the electrical testing procedure, the method of burning the cables and the method of shock production and gives requirements for evaluating test results. NOTE All cables assessed by this method should first have been assessed against the test of IEC 60331-1 or IEC 60331-2. Such performance may be recognized by the marking according to Clause 11 of IEC 60331-1 or Clause 11 of IEC 60331-2. Annex A provides the method of verification of the burner and control system used for the test. It has the status of a horizontal standard in accordance with IEC Guide 104.

Essais pour câbles électriques soumis au feu - Intégrité des circuits - Partie 3: Méthode d'essai au feu pour les câbles de tension assignée au plus égale à 0,6/1,0 kV, essayés sous conduit métallique avec chocs, à une température d'au moins 830 °C

La CEI 60331-3:2009 donne des précisions sur l'appareillage d'essai, la procédure d'essai et les exigences de performance, y compris des recommandations pour la durée des temps d'application de la flamme pour les câbles de puissance à basse tension, de tension assignée au plus égale à 0,6/1,0 kV, et les câbles de contrôle ayant une tension assignée, qui sont réputés conserver l'intégrité du circuit quand ils sont soumis, sous conduit métallique, à un incendie et des chocs mécaniques, dans des conditions spécifiées. Cette norme décrit les moyens de préparation de l'éprouvette d'essai, les dispositions de contrôle de la continuité du circuit, la procédure d'essai électrique, la méthode pour brûler les câbles et la méthode de production des chocs, et elle indique les exigences pour évaluer les résultats d'essai. NOTE Il convient que tout type de câble à évaluer par cette méthode ait été auparavant soumis à l'essai de la CEI 60331-1 ou de la CEI 60331-2. Une telle performance peut être évaluée d'après le marquage de l'Article 11 de la CEI 60331-1 ou de l'Article 11 de la CEI 60331-2. L'Annexe A donne la méthode de vérification du brûleur et le système de contrôle utilisé pour l'essai. Elle a le statut de norme horizontale conformément au IEC Guide 104.

General Information

Status
Published
Publication Date
18-May-2009
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
28-Mar-2018
Ref Project

Relations

Buy Standard

Standard
IEC 60331-3:2009 - Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure Released:5/19/2009
English and French language
49 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60331-3 ®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
GROUP SAFETY PUBLICATION
PUBLICATION GROUPÉE DE SÉCURITÉ
Tests for electric cables under fire conditions – Circuit integrity –
Part 3: Test method for fire with shock at a temperature of at least 830 °C for
cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

Essais pour câbles électriques soumis au feu – Intégrité des circuits –
Partie 3: Méthode d’essai au feu pour les câbles de tension assignée au plus
égale à 0,6/1,0 kV, essayés sous conduit métallique avec chocs, à une
température d’au moins 830 °C
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60331-3 ®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
GROUP SAFETY PUBLICATION
PUBLICATION GROUPÉE DE SÉCURITÉ
Tests for electric cables under fire conditions – Circuit integrity –
Part 3: Test method for fire with shock at a temperature of at least 830 °C for
cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

Essais pour câbles électriques soumis au feu – Intégrité des circuits –
Partie 3: Méthode d’essai au feu pour les câbles de tension assignée au plus
égale à 0,6/1,0 kV, essayés sous conduit métallique avec chocs, à une
température d’au moins 830 °C
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 13.220.40; 29.20; 29.060.20 ISBN 978-2-88910-126-9
– 2 – 60331-3 © IEC:2009
CONTENTS
FOREWORD.4

INTRODUCTION.6

1 Scope.7

2 Normative references.7

3 Terms and definitions .7

4 Test conditions – Test environment.8

5 Test apparatus .8

5.1 Test equipment.8
5.2 Metal enclosure .13
5.2.1 Material and dimensions .13
5.2.2 Metal enclosure selection.13
5.3 Test ladder and mounting .13
5.4 Source of heat .14
5.4.1 Burner .14
5.4.2 Flow meters and flow rates .15
5.4.3 Verification .16
5.5 Shock producing device.16
5.6 Positioning of source of heat.17
5.7 Continuity checking arrangements .17
5.8 Fuses .17
6 Test specimen .17
6.1 Test specimen preparation.17
6.2 Test specimen mounting.18
7 Test procedure .18
7.1 Test equipment and arrangement.18
7.2 Electrical connections .18
7.3 Flame and shock application.20
7.4 Electrification.20
8 Performance requirement .21
8.1 Flame application time.21
8.2 Acceptance criteria .21
9 Retest procedure .21

10 Test report.21
Annex A (normative) Verification procedure for the source of heat .22
Annex B (informative) Guidance on the choice of recommended test apparatus .24
Bibliography .25

Figure 1 – Schematic diagram of test configuration.9
Figure 2 – Recommended method of mounting the metal enclosure to the test ladder .10
Figure 3 – Plan view of fire test equipment .11
Figure 4 – End elevation of fire test equipment (not to scale) .12
Figure 5 – Typical rubber bush for supporting the test ladder .14
Figure 6 – Burner face .15

60331-3 © IEC:2009 – 3 –
Figure 7 – Schematic diagram of an example of a burner control system using

rotameters .16

Figure 8 – Basic circuit diagram .20

Figure A.1 – Temperature measuring arrangement .22

Table 1 – Enclosure dimensions.13

Table 2 – Multicore sheathed cable .18

Table 3 – Single core unsheathed or sheathed cable .18

– 4 – 60331-3 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
TESTS FOR ELECTRIC CABLES UNDER FIRE CONDITIONS –

CIRCUIT INTEGRITY –
Part 3: Test method for fire with shock at a temperature

of at least 830 °C for cables of rated voltage up to and

including 0,6/1,0 kV tested in a metal enclosure

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.