HD 60364-7-714:2012

SLOVENSKI STANDARD
01-julij-2012
1DGRPHãþD
SIST HD 384.7.714 S1:2001
1L]NRQDSHWRVWQHHOHNWULþQHLQãWDODFLMHGHO=DKWHYH]DSRVHEQHQDSHOMDYH
DOLORNDFLMH1DSHOMDYH]D]XQDQMRUD]VYHWOMDYR,(&
Low-voltage electrical installations - Part 7-714: Requirements for special installations or
locations - External lighting installations
Errichten von Niederspannungsanlagen - Teil 7-714: Anforderungen für Betriebsstätten,
Räume und Anlagen besonderer Art - Beleuchtungsanlagen im Freien
Installations électriques à basse tension - Partie 7-714: Règles pour les installations et
emplacements spéciaux - Installations d'éclairage extérieur
Ta slovenski standard je istoveten z: HD 60364-7-714:2012
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
91.160.20 Zunanja razsvetljava stavb Exterior building lighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONIZATION DOCUMENT
HD 60364-7-714
DOCUMENT D'HARMONISATION
May 2012
HARMONISIERUNGSDOKUMENT
ICS 91.140; 91.160.20 Supersedes HD 384.7.714 S1:2000

English version
Low-voltage electrical installations -
Part 7-714: Requirements for special installations or locations -
External lighting installations
(IEC 60364-7-714:2011)
Installations électriques à basse tension - Errichten von Niederspannungsanlagen -
Partie 7-714: Règles pour les installations Teil 7-714: Anforderungen für
et emplacements spéciaux - Betriebsstätten, Räume und Anlagen
Installations d'éclairage extérieur besonderer Art -
(CEI 60364-7-714:2011) Beleuchtungsanlagen im Freien
(IEC 60364-7-714:2011)
This Harmonization Document was approved by CENELEC on 2012-03-14. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
Harmonization Document at national level.

Up-to-date lists and bibliographical references concerning such national implementations may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This Harmonization Document exists in three official versions (English, French, German).

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. HD 60364-7-714:2012 E

Foreword
The text of document 64/1806/FDIS, future edition 2 of IEC 60364-7-714, prepared by IEC TC 64
"Electrical installations and protection against electric shock" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as HD 60364-7-714:2012.

The following dates are fixed:
(dop) 2012-12-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-03-14
• latest date by which the national

standards conflicting with the
document have to be withdrawn
This document supersedes HD 384.7.714 S1:2000.
HD 384.7.714 S1:2000.
– clause numbering is aligned with present structure of EN 60364;
– additional protection is required in some cases of equipment incorporating lighting;
– more stringent requirements regarding IP degree of protection;
– introduction of particular requirements for isolation.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60364-7-714:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60364-1:2005 NOTE  Harmonized as HD 60364-1:2008 (modified).
IEC 60364-7-702:2010 NOTE  Harmonized as HD 60364-7-702:2010 (modified).
IEC 60598 series NOTE  Harmonized in EN 60598 series.

- 3 - HD 60364-7-714:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60364-4-41 2005 Low-voltage electrical installations - HD 60364-4-41 2007
(mod) Part 4-41: Protection for safety - Protection + corr. July 2007
against electric shock
IEC 60364-5-51 2005 Electrical installations of building - HD 60364-5-51 2009
(mod) Part 5-51: Selection and erection of electrical
equipment - Common rules
IEC 60364-5-53 2001 Electrical installations of buildings - - -
Part 5-53: Selection and erection of electrical
equipment - Isolation, switching and control

Annex ZB
(normative)
Special national conditions
Special national condition: National characteristic or practice that cannot be changed even over a long
period, e.g. climatic conditions, electrical earthing conditions.

NOTE  If it affects harmonization, it forms part of the Harmonization Document.

For the countries in which the relevant special national conditions apply these provisions are normative,
for other countries they are informative.

Country Clause Special national condition
Delete "AA2 , "AA4", AB2" and AB4".
DE 714.512.2.1
Replace "AD3" by "IPX3" and "AE2" by "IP3X".

IEC 60364-7-714 ®
Edition 2.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 7-714: Requirements for special installations or locations – External
lighting installations
Installations électriques à basse tension –
Partie 7-714: Règles pour les installations et emplacements spéciaux –
Installations d'éclairage extérieur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX K
ICS 91.140.50; 91.160.20 ISBN 978-2-88912-842-6

– 2 – 60364-7-714 © IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
714 External lighting installations . 6
714.1 Scope . 6
714.2 Normative references . 6
714.4 Protection for safety . 6
714.41 Protection against electric shock . 6
714.410.3 General requirements . 6
714.411 Protective measure: automatic disconnection of supply. 7
714.411.3.1 Protective earthing and protective equipotential bonding . 7
714.411.3.1.2 Protective equipotential bonding . 7
714.411.3.3 Additional protection . 7
714.41 (Annex A) Provisions for basic protection . 7
714.5 Selection and erection of electrical equipment . 7
714.51 Common rules . 7
714.512 Operational conditions and external influences . 7
714.512.2 External influences . 7
714.536 Isolation and switching . 8
714.536.2 Isolation . 8
714.536.2.1 General . 8
Annex A (informative) List of notes concerning certain countries . 9
Bibliography . 10

60364-7-714 © IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-714: Requirements for special installations or locations –
External lighting installations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60364-7-714 has been prepared by committee 64: Electrical
installations and protection against electric shock.
This second edition cancels and replaces the first edition, published in 1996, and constitutes
a technical revision.
The major technical changes with respect to the previous edition are listed below:
– clause numbering is aligned with present structure of IEC 60364;
– additional protection is required in some cases of equipment incorporating lighting;
– more stringent requirements regarding IP degree of protection;
– introduction of particular requirements for isolation.

– 4 – 60364-7-714 © IEC:2011
The text of this standard is based on the following documents:
FDIS Report on voting
64/1806/FDIS 64/1814/RVD
Full information on the voting for the approval of this standard can be found in the report on
vot
...