EN 61340-2-1:2015/A1:2022

SLOVENSKI STANDARD
01-oktober-2022
Elektrostatika - 2-1. del: Merilne metode - Sposobnost materialov in izdelkov za
odvajanje elektrostatičnega naboja - Dopolnilo A1 (IEC 61340-2-1:2015/AMD1:2022)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to
dissipate static electric charge (IEC 61340-2-1:2015/AMD1:2022)
Elektrostatik - Teil 2-1: Messverfahren - Fähigkeit von Materialien und Erzeugnissen,
elektrostatische Ladungen abzuleiten (IEC 61340-2-1:2015/AMD1:2022)
Electrostatique - Partie 2-1: Méthodes de mesure - Capacité des matériaux et des
produits à dissiper des charges électrostatiques (IEC 61340-2-1:2015/AMD1:2022)
Ta slovenski standard je istoveten z: EN 61340-2-1:2015/A1:2022
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61340-2-1:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2022
ICS 17.220.99; 29.020
English Version
Electrostatics - Part 2-1: Measurement methods - Ability of
materials and products to dissipate static electric charge
(IEC 61340-2-1:2015/AMD1:2022)
Electrostatique - Partie 2-1: Méthodes de mesure - Elektrostatik - Teil 2-1: Messverfahren - Fähigkeit von
Capacité des matériaux et des produits à dissiper des Materialien und Erzeugnissen, elektrostatische Ladungen
charges électrostatiques abzuleiten
(IEC 61340-2-1:2015/AMD1:2022) (IEC 61340-2-1:2015/AMD1:2022)
This amendment A1 modifies the European Standard EN 61340-2-1:2015; it was approved by CENELEC on 2022-07-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61340-2-1:2015/A1:2022 E

European foreword
The text of document 101/639/CDV, future IEC 61340-2-1/AMD1, prepared by IEC/TC 101
"Electrostatics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61340-2-1:2015/AMD1:2022 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61010-1 - Safety requirements for electrical equipment EN 61010-1 -
for measurement, control, and laboratory
use - Part 1: General requirements
IEC 61010-2-030 - Safety requirements for electrical equipment EN IEC 61010-2-030 -
for measurement, control, and laboratory
use - Part 2-030: Particular requirements for
equipment having testing or measuring
circuits
IEC 61340-2-1 ®
Edition 2.0 2022-06
INTERNATIONAL
STANDARD
HORIZONTAL PUBLICATION
AMENDMENT 1
Electrostatics –
Part 2-1: Measurement methods – Ability of materials and products to dissipate

static electric charge
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 17.220.99; 29.020 ISBN 978-2-8322-3937-7

– 2 – IEC 61340-2-1:2015/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTROSTATICS –
Part 2-1: Measurement methods – Ability of materials
and products to dissipate static electric charge

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, u
...