EN 60368-4-1:2000

SLOVENSKI SIST EN 60368-4-1:2002
prva izdaja
STANDARD
september 2002
Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification -
Capability approval (IEC 60368-4-1:2000)
ICS 31.140; 31.160 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60368-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2000

ICS 31.140;31.160
English version
Piezoelectric filters of assessed quality
Part 4-1: Blank detail specification -
Capability approval
(IEC 60368-4-1:2000)
Filtres piézoélectriques sous assurance de Piezoelektrische Filter mit bewerteter
la qualité Qualität
Partie 4-1: Spécification particulière cadre Teil 4-1:Vordruck für Bauartspezifikation -
Agrément de savoir-faire Befähigungsanerkennung
(CEI 60368-4-1:2000) (IEC 60368-4-1:2000)

This European Standard was approved by CENELEC on 2000-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60368-4-1:2000 E
Page 2
Foreword
The text of document 49/469/FDIS, future edition 1 of IEC 60368-4-1, prepared by IEC TC 49,
Piezoelectric and dielectric devices for frequency control and selection, was submitted to the IEC-
CENELEC parallel vote and was approved by CENELEC as EN 60368-4-1 on 2000-12-01.
This standard is to be used in conjunction with EN 60368-1, Piezoelectric filters of assessed quality – Part 1:
Generic specification, and EN 60368-4, Piezoelectric filters of assessed quality -- Part 4: Sectional
specification – Capability approval.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-12-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60368-4-1:2000 was approved by CENELEC as a European
Standard without any modification.
__________
Page 3
EN X:2000
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this European Standard only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60368-1 2000 Piezoelectric filters of assessed quality EN 60368-1 2000
Part 1: Generic specification
1)
IEC 60368-3 Part 3: Standard outlines and lead - -
connections
IEC 60368-4 2000 Part 4: Sectional specification - Capability EN 60368-4 2000
approval
IEC 60410 1973 Sampling plans and procedures for - -
inspection by attributes
IEC QC 001004 IEC quality assessment system for - -
electronic components (IECQ) -
Specifications list
(information current to 1999-09)

IEC QC 001005 Register of firms, products and services - -
approved under the IECQ System including
ISO 9000
1)
In preparation.
NORME
CEI
INTERNATIONALE IEC
60368-4-1
INTERNATIONAL
QC 640101
STANDARD
Première édition
First edition
2000-11
Filtres piézoélectriques sous assurance
de la qualité –
Partie 4-1:
Spécification particulière cadre –
Agrément de savoir-faire
Piezoelectric filters of assessed quality –
Part 4-1:
Blank detail specification –
Capability approval
© IEC 2000 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
L
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60368-4-1 © IEC:2000 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
–––––––––––
PIEZOELECTRIC FILTERS OF ASSESSED QUALITY –
Part 4-1: Blank detail specification – Capability approval
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60368-4-1 has been prepared by IEC technical committee 49:
Piezoelectric and dielectric devices for frequency control and selection.
The text of this standard is based on the following documents:
FDIS Report on voting
49/469/FDIS 49/480/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This standard shall be used in conjunction with the following standards:
IEC 60368-1: Piezoelectric filters of assessed quality – Part 1: Generic specification
IEC 60368-4: Piezoelectric filters of assessed quality − Part 4: Sectional specification −
Capability approval
It forms part 4-1 of a
...