EN 62575-1:2016

SLOVENSKI STANDARD
01-april-2016
5DGLRIUHNYHQþQLILOWUL5)]D]HORYLVRNH]YRþQHIUHNYHQFH%$:GRORþHQH
NDNRYRVWLGHO6SORãQDVSHFLILNDFLMD
Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1:
Generic specification
Ta slovenski standard je istoveten z: EN 62575-1:2016
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML RF connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62575-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 31.140
English Version
Radio frequency (RF) bulk acoustic wave (BAW) filters of
assessed quality - Part 1: Generic specification
(IEC 62575-1:2015)
Filtres radiofréquences (RF) à ondes acoustiques de Volumenwellen-(BAW-)Filter mit bewerteter Qualität für
volume (OAV) sous assurance de la qualité - Hochfrequenz-(HF-)Anwendungen -
Partie 1: Spécification générique Teil 1: Fachgrundspezifikation
(IEC 62575-1:2015) (IEC 62575-1:2015)
This European Standard was approved by CENELEC on 2015-12-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62575-1:2016 E
European foreword
The text of document 49/1163/FDIS, future edition 1 of IEC 62575-1, prepared by
IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequency
control, selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62575-1:2016.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-09-03
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-12-03
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62575-1:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60368 Series NOTE Harmonized as EN 60368 Series.
IEC 60862-1:2015 NOTE Harmonized as EN 60862-1:2015 (not modified).
IEC 61000-4-2 NOTE Harmonized as EN 61000-4-2.
IEC 62604-1:2015 NOTE Harmonized as EN 62604-1:2015 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
IEC 60050-561 -  International electrotechnical - -
vocabulary (IEV) -
Part 561: Piezoelectric, dielectric and
electrostatic devices and associated
materials for frequency control, selection
and detection
IEC 60068-1 2013 Environmental testing - EN 60068-1 2014
Part 1: General and guidance
IEC 60068-2-1 -  Environmental testing - EN 60068-2-1 -
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 -  Environmental testing - EN 60068-2-2 -
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 -  Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-7 -  Basic environmental testing procedures - EN 60068-2-7 -
Part 2-7: Tests - Test Ga and guidance:
Acceleration, steady state
IEC 60068-2-13 -  Basic environmental testing procedures - EN 60068-2-13 -
Part 2-13: Tests - Test M: Low air pressure
IEC 60068-2-14 -  Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-17 1994 Basic environmental testing procedures - EN 60068-2-17 1994
Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-21 -  Environmental testing - EN 60068-2-21 -
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices
IEC 60068-2-27 -  Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-30 -  Environmental testing - EN 60068-2-30 -
Part 2-30: Tests - Test Db: Damp heat,
cyclic (12 h + 12 h cycle)
Publication Year Title EN/HD Year

IEC 60068-2-31 -  Environmental testing - EN 60068-2-31 -
Part 2-31: Tests - Test Ec: Rough handling
shocks, primarily for equipment-type
specimens
IEC 60068-2-45 -  Basic environmental testing procedures - EN 60068-2-45 -
Part 2-45: Tests - Test XA and guidance:
Immersion in cleaning solvents
IEC 60068-2-52 -  Environmental testing - EN 60068-2-52 -
Part 2-52: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60068-2-58 -  Environmental testing - EN 60068-2-58 -
Part 2-58: Tests - Test Td: Test methods
for solderability, resistance to dissolution of
metallization and to soldering heat of
surface mounting devices (SMD)
IEC 60068-2-64 -  Environmental testing - EN 60068-2-64 -
Part 2-64: Tests - Test Fh: Vibration,
broadband random and guidance
IEC 60068-2-78 -  Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60122-1 -  Quartz crystal units of assessed quality - EN 60122-1 -
Part 1: Generic specification
IEC 60617-DB -  Graphical symbols for diagrams - -
IEC 60642 -  Piezoelectric ceramic resonators and - -
resonator units for frequency control and
selection - Chapter I: Standard values and
conditions - Chapter II: Measuring and test
conditions
IEC 60695-11-5 -  Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
1) 1)
IEC 60749-28 -  Semiconductor devices - Mechanical and EN 60749-28 -
climatic test methods -
Part 28: Electrostatic Discharge (ESD)
Sensitivity Testing Direct contact charged
device model (DC-CDM)
IEC 61340-3-1 -  Electrostatics - EN 61340-3-1 -
Part 3-1: Methods for simulation of
electrostatic effects - Human body model
(HBM) electrostatic discharge test
waveforms
IEC 61340-3-2 -  Electrostatics - EN 61340-3-2 -
Part 3-2: Methods for simulation of
electrostatic effects - Machine model (MM)
electrostatic discharge test waveforms
ISO 80000-1 -  Quantities and units - EN ISO 80000-1 -
Part 1: General
1)
At draft stage.
IEC 62575-1 ®
Edition 1.0 2015-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality –

Part 1: Generic specification
Filtres radiofréquences (RF) à ondes acoustiques de volume (OAV) sous

assurance de la qualité –
Partie 1: Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.140 ISBN 978-2-8322-2969-9

– 2 – IEC 62575-1:2015 © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references. 8
3 Terms, definitions, units and symbols . 9
3.1 Terms and definitions . 9
3.2 Units and symbols . 15
4 Preferred values for ratings and characteristics . 15
4.1 General . 15
4.2 Nominal frequencies . 15
4.3 Operating temperature ranges, in degrees Celsius (°C) . 16
4.4 Climatic category . 16
4.5 Bump severity . 16
4.6 Vibration severity . 17
4.7 Shock severity . 17
4.8 Fine leak rate . 17
5 Marking . 18
5.1 Filter marking . 18
5.2 Package marking . 18
6 Quality assessment procedures . 18
6.1 General . 18
6.2 Primary stage of manufacture . 18
6.3 Structurally similar components . 18
6.4 Subcontracting . 18
6.5 Incorporated components . 18
6.6 Manufacturer’s approval . 19
6.7 Approval procedures . 19
6.7.1 General . 19
6.7.2 Capability approval . 19
6.7.3 Qualification approval . 19
6.8 Procedures for capability approval . 19
6.8.1 General . 19
6.8.2 Eligibility for capability approval . 20
6.8.3 Application for capability approval . 20
6.8.4 Granting of capability approval . 20
6.8.5 Capability manual . 20
6.9 Procedures for qualification approval . 20
6.9.1 General . 20
6.9.2 Eligibility for qualification approval. 20
6.9.3 Application for qualification approval . 20
6.9.4 Granting of qualification approval
...