EN IEC 62604-2:2022

SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN IEC 62604-2:2018
Radiofrekvenčni (SAW) in visokofrekvenčni (BAW) duplekserji ocenjene kakovosti
- 2. del: Smernice za uporabo (IEC 62604-2:2022)
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed
quality - Part 2: Guidelines for the use (IEC 62604-2:2022)
Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-)Duplexer mit bewerteter Qualität
– Teil 2: Leitfaden für die Anwendung (IEC 62604-2:2022)
Duplexeurs à ondes acoustiques de surface (oas) et à ondes acoustiques de volume
(oav) sous assurance de la qualité - Partie 2 : Lignes directrices dutilisation (IEC 62604-
2:2022)
Ta slovenski standard je istoveten z: EN IEC 62604-2:2022
ICS:
31.140 Piezoelektrične naprave Piezoelectric devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62604-2

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2022
ICS 31.140 Supersedes EN IEC 62604-2:2018
English Version
Surface acoustic wave (SAW) and bulk acoustic wave (BAW)
duplexers of assessed quality - Part 2: Guidelines for the use
(IEC 62604-2:2022)
Duplexeurs à ondes acoustiques de surface (OAS) et à Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-
ondes acoustiques de volume (OAV) sous assurance de la )Duplexer mit bewerteter Qualität - Teil 2: Leitfaden für die
qualité - Partie 2: Lignes directrices d'utilisation Anwendung
(IEC 62604-2:2022) (IEC 62604-2:2022)
This European Standard was approved by CENELEC on 2022-10-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62604-2:2022 E

European foreword
The text of document 49/1361/CDV, future edition 3 of IEC 62604-2, prepared by IEC/TC 49
"Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control,
selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62604-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-07-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-10-06
document have to be withdrawn
This document supersedes EN IEC 62604-2:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62604-2:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60862-2:2012 NOTE Harmonized as EN 60862-2:2012 (not modified)
IEC 61019-1:2004 NOTE Harmonized as EN 61019-1:2005 (not modified)
IEC 61019-2:2005 NOTE Harmonized as EN 61019-2:2005 (not modified)
IEC 62047-7:2011 NOTE Harmonized as EN 62047-7:2011 (not modified)
IEC 62575-2:2012 NOTE Harmonized as EN 62575-2:2012 (not modified)
IEC 62604-1 NOTE Harmonized as EN IEC 62604-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60862-1 - Surface acoustic wave (SAW) filters of EN 60862-1 -
assessed quality - Part 1: Generic specification
IEC 62575-1 - Radio frequency (RF) bulk acoustic wave EN 62575-1 -
(BAW) filters of assessed quality - Part 1:
Generic specification
IEC 62604-2 ®
Edition 3.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of

assessed quality –
Part 2: Guidelines for the use

Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de

volume (OAV) sous assurance de la qualité –

Partie 2: Lignes directrices d’utilisation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.140 ISBN 978-2-8322-4875-1

– 2 – IEC 62604-2:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
3.1 Response characteristics related terms . 7
3.2 SAW and BAW duplexers related terms . 8
4 Technical considerations . 8
5 Fundamentals of SAW and BAW duplexers. 8
5.1 Basic function . 8
5.1.1 General . 8
5.1.2 TX filter response (filter response from TX port to antenna port) . 9
5.1.3 RX filter response (filter response from antenna port to RX port) . 10
5.1.4 Isolation (isolation from TX port to RX port) . 10
5.2 Basic structure . 11
5.3 Principle of operation . 11
5.4 Diplexer . 14
5.5 Multiplexer . 15
6 SAW and BAW duplexer characteristics . 15
6.1 General conditions for SAW and BAW duplexers . 15
6.2 Typical characteristics of SAW and BAW duplexers . 18
6.2.1 UMTS duplexer . 18
6.2.2 US CDMA duplexer . 18
6.2.3 PCS CDMA duplexer . 18
6.2.4 LTE Band 1 + Band 3 multiplexer. 19
7 Application guidelines . 23
7.1 Power durability . 23
7.2 Harmonics and inter-modulation distortion . 23
7.3 Measurement method for the duplexer . 23
7.4 Electrostatic voltage protection . 25
Bibliography . 26

Figure 1 – Basic duplexer configuration . 9
Figure 2 – Basic TX filter response example of SAW and BAW duplexers . 10
Figure 3 – Basic RX filter response example of SAW and BAW duplexers . 10
Figure 4 – Basic isolation characteristics example of SAW and BAW duplexers . 11
Figure 5 – The block diagram of a duplexer . 12
Figure 6 – Demanded condition of TX part for duplexers . 13
Figure 7 – Phase rotation in TX part . 13
Figure 8 – Demanded condition of RX part for duplexers . 14
Figure 9 – Basic diplexer configuration . 14
Figure 10 – Basic multiplexer configuration . 15
Figure 11 – Typical wide range frequency response of TX filter . 16
Figure 12 – Typical wide range frequency response of RX filter for upper local system . 17

IEC 62604-2:2022 © IEC 2022 – 3 –
Figure 13 – Phase shifter by microstrip line on the surface of a ceramic package . 17
Figure 14 – Lumped element phase shifter . 17
Figure 15 – Duplexer configuration . 18
Figure 16 – Frequency characteristics of SAW duplexer for UMTS Band 1 system . 20
Figure 17 – Frequency characteristics of a SAW duplexer for US CDMA system . 21
Figure 18 – Frequency characteristics of BAW duplexer for PCS CDMA system . 22
Figure 19 – Frequency characteristics of SAW Band 1 + Band 3 multiplexer for LTE. 23
Figure 20 – Four-port-type network analyzer for duplexer measurement . 24
Figure 21 – Four-port-type network analyzer for measurement of a balanced RX port
duplexer. 25

Table 1 – Frequency allocation for typical LTE frequency division duplex (FDD) bands . 9

– 4 – IEC 62604-2:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SURFACE ACOUSTIC WAVE (SAW) AND BULK
ACOUSTIC WAVE (BAW) DUPLEXERS
OF ASSESSED QUALITY –
Part 2: Guidelines for the use

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, go
...