prEN IEC 61995-2:2023

SLOVENSKI STANDARD
01-december-2023
Elementi za priključitev svetilk za gospodinjstva in podobne namene - 2. del: Listi
standarda za seznam deklariranih komponent (DCL)
Devices for the connection of luminaires for household and similar purposes - Part 2:
Standard sheets for dcl
Betriebsmittel für den Anschluss von Leuchten für Haushalt und ähnliche Zwecke - Teil
2: Normblätter für Betriebsmittel zum Anschluss einer Leuchte
Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 2:
Feuilles de norme pour dcl
Ta slovenski standard je istoveten z: prEN IEC 61995-2:2023
ICS:
29.120.20 Spojni elementi Connecting devices
29.140.40 Svetila Luminaires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

23B/1478/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61995-2 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-10-27 2024-01-19
SUPERSEDES DOCUMENTS:
23B/1376/CD, 23B/1394A/CC
IEC SC 23B : PLUGS, SOCKET-OUTLETS AND SWITCHES
SECRETARIAT: SECRETARY:
Italy Mr Cristiano Masini
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 34D,TC 64
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Devices for the connection of luminaires for household and similar purposes - Part 2: Standard
sheets for DCL
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
rd
The document has been finalized during meeting in SC23B MT13 on May 23 and prepared for circulation as CDV
document to national committees.

this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.

IEC CDV 61995-2 © IEC 2023 2 23B/1478/CDV

1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references. 5
5 3 Requirements and tests . 5
6 4 Standard sheets . 5
8 Figure 1 – Example of use of a DCL socket and a DCL plug inserted in a flush type box in
9 a ceiling . 14
IEC CDV 61995-2 © IEC 2023 3 23B/1478/CDV

13 INTERNATIONAL ELECTROTECHNICAL COMMISSION
14 ______________
16 DEVICES FOR THE CONNECTION OF LUMINAIRES
17 FOR HOUSEHOLD AND SIMILAR PURPOSES –
19 Part 2: Standard sheets for DCL
22 FOREWORD
23 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
24 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -
25 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
26 to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
27 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
28 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
29 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
30 participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
31 in accordance with conditions determined by agreement between the two organizations.
32 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
33 consensus of opinion on the relevant subjects since each technical committee has representation from all interested
34 IEC National Committees.
35 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
36 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
37 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
38 by any end user.
39 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
40 transparently to the maximum extent possible in their national and regional publications. Any divergence between any
41 IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
42 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
43 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
44 carried out by independent certification bodies.
45 6) All users should ensure that they have the latest edition of this publication.
46 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
47 of its technical committees and IEC National Committees for any personal injury, property damage or other damage
48 of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of
49 the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
50 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
51 indispensable for the correct application of this publication.
52 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
53 rights. IEC shall not be held responsible for identifying any or all such patent rights.
DISCLAIMER
This document is not an official IEC Standard and has been prepared by MT13 as draft for
61995-2 Ed.2. Only the current versions of the standard and its amendment(s) are to be
considered the official documents.
54 This Consolidated version of IEC 61995-2 bears the edition number 2.0. It consists of the
55 first edition (2009-02) [documents 23B/919/FDIS and 23B/925/RVD] and its amendment 1
56 (2016-05) [documents 23B/1207/FDIS and 23B/1211/RVD]. The technical content is identical
57 to the base edition and its amendment.
---
...