EN 62386-103:2014

SLOVENSKI STANDARD
01-junij-2015
Digitalni naslovljivi vmesnik za razsvetljavo - 103. del: Splošne zahteve - Krmilne
naprave (IEC 62386-103:2014)
Digital addressable lighting interface - Part 103: General requirements - Control devices
Ta slovenski standard je istoveten z: EN 62386-103:2014
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62386-103

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.140; 29.140.50
English Version
Digital addressable lighting interface -
Part 103: General requirements - Control devices
(IEC 62386-103:2014)
Interface d'éclairage adressable numérique -  Digital adressierbare Schnittstelle für die Beleuchtung -
Partie 103: Exigences générales - Dispositifs de commande Teil 103: Allgemeine Anforderungen - Steuergeräte
(CEI 62386-103:2014) (IEC 62386-103:2014)
This European Standard was approved by CENELEC on 2014-12-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62386-103:2014 E
Foreword
The text of document 34C/1100/FDIS, future edition 1 of IEC 62386-103, prepared by
SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-103:2014.

The following dates are fixed:
(dop) 2015-09-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-12-12
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62386-103:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

CISPR 15 NOTE Harmonized as EN 55015.
IEC 60598-1 NOTE Harmonized as EN 60598-1.
IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1.
IEC 60921 NOTE Harmonized as EN 60921.
IEC 60923 NOTE Harmonized as EN 60923.
IEC 60929 NOTE Harmonized as EN 60929.
IEC 61347-1 NOTE Harmonized as EN 61347-1.
IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3.
IEC 61547 NOTE Harmonized as EN 61547.
IEC 62034 NOTE Harmonized as EN 62034.

- 3 - EN 62386-103:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 62386-101 2014 Digital addressable lighting interface - EN 62386-101 2014
Part 101: General requirements - System
Components
IEC 62386-102 2014 Digital addressable lighting interface - EN 62386-102 2014
Part 102: General requirements - Control
gear
IEC 62386-103 ®
Edition 1.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –

Part 103: General requirements – Control devices

Interface d'éclairage adressable numérique –

Partie 103: Exigences générales – Dispositifs de commande

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 29.140, 29.140.50 ISBN 978-2-8322-1905-8

– 2 – IEC 62386-103:2014 © IEC 2014
CONTENTS
FOREWORD . 11
INTRODUCTION . 13
1 Scope . 15
2 Normative references . 15
3 Terms and definitions . 15
4 General . 18
4.1 General . 18
4.2 Version number . 18
5 Electrical specification . 18
6 Interface power supply . 18
7 Transmission protocol structure . 18
7.1 General . 18
7.2 24 bit forward frame encoding . 19
7.2.1 Frame format for instructions and queries . 19
7.2.2 Frame format for event messages. 20
8 Timing . 21
9 Method of operation . 21
9.1 General . 21
9.2 Application controller . 21
9.2.1 General . 21
9.2.2 Single-master application controller . 22
9.2.3 Multi-master application controller . 22
9.3 Input device . 22
9.4 Instances of input devices . 23
9.4.1 General . 23
9.4.2 Instance number . 23
9.4.3 Instance type . 23
9.4.4 Feature type . 23
9.4.5 Instance groups . 24
9.5 Commands . 24
9.5.1 General . 24
9.5.2 Device commands . 24
9.5.3 Instance commands . 25
9.5.4 Feature commands . 25
9.6 Event messages . 25
9.6.1 Response to event messages . 25
9.6.2 Device power cycle event . 25
9.6.3 Input notification event . 25
9.6.4 Event message filter . 26
9.7 Input signal and input value . 27
9.7.1 General . 27
9.7.2 Input resolution . 27
9.7.3 Getting the input value . 27
9.7.4 Notification of changes . 28
9.8 System failure . 28

IEC 62386-103:2014 © IEC 2014 – 3 –
9.9 Operating a control device . 29
9.9.1 Enable/disable the application controller . 29
9.9.2 Enable/disable event messages . 29
9.9.3 Quiescent mode . 29
9.9.4 Modes of operation . 30
9.10 Memory banks . 30
9.10.1 General . 30
9.10.2 Memory map . 31
9.10.3 Selecting a memory bank location . 31
9.10.4 Memory bank reading . 32
9.10.5 Memory bank writing . 32
9.10.6 Memory bank 0 . 33
9.10.7 Memory bank 1 . 35
9.10.8 Manufacturer specific memory banks . 37
9.10.9 Reserved memory banks . 37
9.11 Reset . 37
9.11.1 Reset operation . 37
9.11.2 Reset memory bank operation . 37
9.12 Power on behaviour . 37
9.12.1 Power on . 37
9.12.2 Power cycle notification . 38
9.13 Priority use . 38
9.13.1 General . 38
9.13.2 Priority of input notifications . 38
9.14 Assigning short addresses . 39
9.14.1 General . 39
9.14.2 Random address allocation . 39
9.14.3 Identification of a device . 39
9.15 Exception handling . 40
9.16 Device capabilities and status information . 40
9.16.1 Device capabilities . 40
9.16.2 Device status . 40
9.16.3 Instance status . 41
9.17 Non-volatile memory . 41
10 Declaration of variables . 42
11 Definition of commands . 43
11.1 General . 43
11.2 Overview sheets . 43
11.3 Event messages . 48
11.3.1 INPUT NOTIFICATION (device/instance, event) . 48
11.3.2 POWER NOTIFICATION (device) . 48
11.4 Device control instructions . 48
11.4.1 General . 48
11.4.2 IDENTIFY DEVICE . 48
11.4.3 RESET POWER CYCLE SEEN . 49
11.5 Device configuration instructions. 49
11.5.1 General . 49
11.5.2 RESET . 49
11.5.3 RESET MEMORY BANK (DTR0) . 49

– 4 – IEC 62386-103:2014 © IEC 2014
11.5.4 SET SHORT ADDRESS (DTR0) . 49
11.5.5 ENABLE WRITE MEMORY . 49
11.5.6 ENABLE APPLICATION CONTROLLER . 50
11.5.7 DISABLE APPLICATION CONTROLLER . 50
11.5.8 SET OPERATING MODE (DTR0) . 50
11.5.9 ADD TO DEVICE GROUPS 0-15 (DTR2:DTR1) . 50
11.5.10 ADD TO DEVICE GROUPS 16-31 ( DTR2:DTR1 ) . 50
11.5.11 REMOVE FROM DEVICE GROUPS 0-15 (DTR2:DTR1) . 50
11.5.12 REMOVE FROM DEVICE GROUPS 16-31 (DTR2:DTR1) . 50
11.5.13 START QUIESCENT MODE . 50
11.5.14 STOP QUIESCENT MODE . 50
11.5.15 ENABLE POWER CYCLE NOTIFICATION . 51
11.5.16 DISABLE POWER CYCLE NOTIFICATION . 51
11.5.17 SAVE PERSISTENT VARIABLES . 51
11.6 Device queries . 51
11.6.1 General . 51
11.6.2 QUERY DEVICE CAPABILITIES . 51
11.6.3 QUERY DEVICE STATUS . 51
11.6.4 QUERY APPLICATION CONTROLLER ERROR . 52
11.6.5 QUERY INPUT DEVICE ERROR . 52
11.6.6 QUERY MISSING SHORT ADDRESS . 52
11.6.7 QUERY VERSION NUMBER . 52
11.6.8 QUERY CONTENT DTR0 . 52
11.6.9 QUERY NUMBER OF INSTANCES . 52
11.6.10 QUERY CONTENT DTR1 . 52
11.6.11 QUERY CONTENT DTR2 . 52
11.6.12 QUERY RANDOM ADDRESS (H) . 53
11.6.13 QUERY RANDOM ADDRESS (M) . 53
11.6.14 QUERY RANDOM ADDRESS (L) . 53
11.6.15 READ MEMORY LOCATION (DTR1, DTR0) . 53
11.6.16 QUERY APPLICATION CONTROL ENABLED . 53
11.6.17 QUERY OPERATING MODE . 53
11.6.18 QUERY MANUFACTURER SPECIFIC MODE . 53
11.6.19 QUERY QUIESCENT MODE . 53
11.6.20 QUERY DEVICE GROUPS 0-7 . 53
11.6.21 QUERY DEVICE GROUPS 8-15 . 54
11.6.22 QUERY DEVICE GROUPS 16-23 . 54
11.6.23 QUERY DEVICE GROUPS 24-31 . 54
11.6.24 QUERY POWER CYCLE NOTIFICATION . 54
11.6.25 QUERY EXTENDED VERSION NUMBER(DTR0) . 54
11.6.26 QUERY RESET STATE . 54
11.7 Instance control instructions . 54
11.8 Instance configuration instructions . 54
11.8.1 General . 54
11.8.2 ENABLE INSTANCE . 55
11.8.3 DISABLE INSTANCE . 55
11.8.4 SET PRIMARY INSTANCE GROUP (DTR0) . 55
11.8.5 SET INSTANCE GROUP 1 (DTR0) . 55
11.8.6 SET INSTANCE GROUP 2 (DTR0) . 55

IEC 62386-103:2014 © IEC 2014 – 5 –
11.8.7 SET EVENT SCHEME (DTR0) . 55
11.8.8 SET EVENT PRIORITY (DTR0) . 56
11.8.9 SET EVENT FILTER (DTR2, DTR1, DTR0) . 56
11.9 Instance queries . 56
11.9.1 General . 56
11.9.2 QUERY INSTANCE TYPE . 56
11.9.3 QUERY RESOLUTION . 56
11.9.4 QUERY INSTANCE ERROR . 56
11.9.5 QUERY INSTANCE STATUS . 56
11.9.6 QUERY INSTANCE ENABLED . 57
11.9.7 QUERY PRIMARY INSTANCE GROUP . 57
11.9.8 QUERY INSTANCE GROUP 1 . 57
11.9.9 QUERY INSTANCE GROUP 2 . 57
11.9.10 QUERY EVENT SCHEME . 57
11.9.11 QUERY INPUT VALUE . 57
11.9.12 QUERY INPUT VALUE LATCH . 57
11.9.13 QUERY EVENT PRIORITY . 57
11.9.14 QUERY FEATURE TYPE . 58
11.9.15 QUERY NEXT FEATURE TYPE . 58
11.9.16 QUERY EVENT FILTER 0-7 . 58
11.9.17 QUERY EVENT FILTER 8-15 . 58
11.9.18 QUERY EVENT FILTER 16-23. 58
11.10 Special commands . 58
11.10.1 General . 58
11.10.2 TERMINATE . 58
11.10.3 INITIALISE (device) . 59
11.10.4 RANDOMISE . 59
11.10.5 COMPARE . 59
11.10.6 WITHDRAW . 59
11.10.7 SEARCHADDRH (data) . 60
11.10.8 SEARCHADDRM (data) . 60
11.10.9 SEARCHADDRL (data) . 60
11.10.10 PROGRAM SHORT ADDRESS (data) . 60
11.10.11 VERIFY SHORT ADDRESS (data) . 60
11.10.12 QUERY SHORT ADDRESS . 61
11.10.13 WRITE MEMORY LOCATION (DTR1, DTR0, data) . 61
11.10.14 WRITE MEMORY LOCATION – NO REPLY (DTR1, DTR0, data) . 61
11.10.15 DTR0 (data) . 61
11.10.16 DTR1 (data) . 62
11.10.17 DTR2 (data) . 62
11.10.18 DIRECT WRITE MEMORY (DTR1, offset, data) . 62
11.10.19 DTR1:DTR0 (data1, data0) . 62
11.10.20 DTR2:DTR1 (data2, data1) . 62
11.10.21 SEND TESTFRAME (data) . 62
12 Test procedures . 63
12.1 General notes on test. 63
12.1.1 General . 63
12.1.2 Test execution . 63
12.1.3 Data transmission . 64

– 6 – IEC 62386-103:2014 © IEC 2014
12.1.4 Test setup . 64
12.1.5 Test output . 64
12.1.6 Test notation . 65
12.1.7 Test execution limitations . 66
12.1.8 Test results . 66
12.1.9 Exception handling . 66
12.1.10 Unexpected answer . 66
12.2 Preamble . 68
12.2.1 Test preamble . 68
12.3 Physical operational parameters . 79
12.3.1 Polarity test . 79
12.3.2 Maximum and minimum system voltage . 80
12.3.3 Overvoltage protection test . 80
12.3.4 Current rating test. 81
12.3.5 Transmitter voltages . 83
12.3.6 Transmitter rising and falling edges . 84
12.3.7 Transmitter bit timing . 86
12.3.8 Transmitter frame timing . 88
12.3.9 Receiver start-up behavior . 89
12.3.10 Receiver threshold . 90
12.3.11 Receiver bit timing . 91
12.3.12 Extended receiver bit timing . 95
12.3.13 Receiver forward frame violation. 97
12.3.14 Receiver settling timing . 97
12.3.15 Receiver frame timing FF-FF send twice . 98
12.3.16 Transmitter collision avoidance by priority . 100
12.3.17 Transmitter collision detection for truncated idle phase . 101
12.3.18 Transmitter collision detection for extended active phase . 104
12.4 Device configuration instructions. 107
12.4.1 RESET deviceGroups . 107
12.4.2 RESET quiescentMode . 108
12.4.3 RESET instance groups . 109
12.4.4 RESET event filter . 110
12.4.5 RESET event scheme . 111
12.4.6 RESET: timeout / command in-between . 112
12.4.7 Send twice timeout (device) . 114
12.4.8 Send twice timeout (instance) . 117
12.4.9 Commands in-between (device) . 119
12.4.10 Commands in-between (instance) . 122
12.4.11 SAVE PERSISTENT VARIABLES . 125
12.4.12 SET OPERATING MODE . 125
12.4.13 Device Disable/Enable Application Controller . 126
12.4.14 Multi Master Control Device PING . 127
12.4.15 Quiescent Mode . 128
12.4.16 Device power cycle notification . 129
12.4.17 SET SHORT ADDRESS . 130
12.4.18 Reset/Power-on values (device) . 131
12.4.19 Reset/Power-on values (instance) . 133
12.4.20 DTR0 / DTR1 / DTR2 . 134

IEC 62386-103:2014 © IEC 2014 – 7 –
12.4.21 DTR1:DTR0 and DTR2:DTR1 . 135
12.4.22 Device Groups . 136
12.5 Device queries . 137
12.5.1 Device query capabilities . 137
12.5.2 QUERY VERSION NUMBER . 137
12.5.3 Device power cycle seen . 138
12.5.4 Input device error . 138
12.6 Device Memory banks . 139
12.6.1 READ MEMORY LOCATION on Memory Bank 0 . 139
12.6.2 READ MEMORY LOCATION on Memory Bank 1 . 144
12.6.3 READ MEMORY LOCATION on other Memory Banks . 146
12.6.4 Memory bank writing . 148
12.6.5 ENABLE WRITE MEMORY: writeEnableState . 153
12.6.6 ENABLE WRITE MEMORY: timeout / command in-between . 155
12.6.7 RESET MEMORY BANK: timeout / command in-between . 156
12.6.8 RESET MEMORY BANK . 159
12.7 Device Special commands . 160
12.7.1 INITIALISE – timer . 160
12.7.2 TERMINATE . 161
12.7.3 INITIALISE - device addressing . 162
12.7.4 RANDOMISE . 163
12.7.5 COMPARE . 163
12.7.6 WITHDRAW . 165
12.7.7 SEARCHADDRH / SEARCHADDRM / SEARCHADDRL . 166
12.7.8 PROGRAM SHORT ADDRESS . 167
12.7.9 VERIFY SHORT ADDRESS . 169
12.7.10 QUERY SHORT ADDRESS . 170
12.7.11 IDENTIFY DEVICE . 172
12.8 Logical unit cross contamination . 174
12.8.1 DTR0 . 174
12.8.2 NVM variables . 174
12.8.3 Random address generation . 175
12.8.4 Addressing 1 . 176
12.8.5 Addressing 2 . 177
12.8.6 Addressing 3 . 179
12.9 Instance addressing . 180
12.9.1 Instance Type Addressing . 180
12.9.2 Instance Primary Group . 181
12.9.3 Instance Group 2 . 182
12.9.4 Instance Group 1 . 184
12.9.5 Instance Group Combinations . 185
12.9.6 Multiple Instances Answer . 187
12.10 Instance configuration instructions . 188
12.10.1 Instance Enable/Disable . 188
12.10.2 Event Scheme . 190
12.10.3 Input Resolution & Input Value . 195
12.10.4 Event Filter . 195
12.11 Instance queries . 196
12.11.1 Instance Number and Types . 196

– 8 – IEC 62386-103:2014 © IEC 2014
12.11.2 Instance Status . 197
12.11.3 Instance Error . 197
12.12 Instance cross contamination . 198
12.12.1 Instance Event Priority . 198
12.13 Reserved Commands . 199
12.13.1 Reserved standard device commands . 199
12.13.2 Reserved instance commands (instance type 0) . 200
12.13.3 Reserved special commands . 200
12.14 General subsequences . 201
12.14.1 Reset Device . 201
12.14.2 EnableApplicationControllerAndAllInstances . 202
12.14.3 DisableApplicationControllerAndAllInstances . 202
12.14.4 HasApplicationController . 202
12.14.5 GetVersionNumber . 203
12.14.6 AddDeviceGroups . 203
12.14.7 RemoveDeviceGroups . 203
12.14.8 ClearAllDeviceGroups. 204
12.14.9 CheckDeviceGroups . 204
12.14.10 GetDeviceGroups . 205
12.14.11 PowerCycle . 205
12.14.12 PowerCycleAndWaitForBusPower . 205
12.14.13 PowerCycleAndWaitForDecoder . 206
12.14.14 SetupTestFrame . 206
12.14.15 GetNumberOfInstances . 207
12.14.16 GetEventFilter . 207
12.14.17 SetEventFilter . 207
12.14.18 GetNumberOfLogicalUnits . 207
12.14.19 GetIndexOfLogicalUnit . 207
12.14.20 GetRandomAddress. 208
12.14.21 GetLimitedRandomAddress . 208
12.14.22 SetSearchAddress . 208
12.14.23 SetShortAddress . 209
12.14.24 ReadMemBankMultibyteLocation . 209
12.14.25 FindImplementedMemoryBank . 210
12.14.26 FindAllImplementedMemoryBanks . 210
12.14.27 ShortAddress . 211
12.14.28 GroupAddress . 211
12.14.29 Broadcast
...