EN IEC 62386-102:2022

SLOVENSKI STANDARD
01-februar-2023
Nadomešča:
SIST EN 62386-102:2015
SIST EN 62386-102:2015/A1:2019
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje
(IEC 62386-102:2022)
Digital addressable lighting interface - Part 102: General requirements - Control gear
(IEC 62386-102:2022)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine
Anforderungen - Betriebsgeräte (IEC 62386-102:2022)
Interface d'éclairage adressable numérique - Partie 102: Exigences générales -
Appareillages de commande (IEC 62386-102:2022)
Ta slovenski standard je istoveten z: EN IEC 62386-102:2022
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62386-102

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2022
ICS 29.140.50; 29.140.99 Supersedes EN 62386-102:2014;
EN 62386-102:2014/A1:2018
English Version
Digital addressable lighting interface - Part 102: General
requirements - Control gear
(IEC 62386-102:2022)
Interface d'éclairage adressable numérique - Partie 102: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences générales - Appareillages de commande 102: Allgemeine Anforderungen - Betriebsgeräte
(IEC 62386-102:2022) (IEC 62386-102:2022)
This European Standard was approved by CENELEC on 2022-12-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-102:2022 E

European foreword
The text of document 34/948/FDIS, future edition 3 of IEC 62386-102, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-09-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-12-21
document have to be withdrawn
This document supersedes EN 62386-102:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62386-102:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 62386-102:2014 NOTE Harmonized as EN 62386-102:2014 (not modified)
IEC 62386-104 NOTE Harmonized as EN IEC 62386-104
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2022 Digital addressable lighting interface - Part EN IEC 62386-101 2022
101: General requirements - System
components
IEC 62386-103 2022 Digital addressable lighting interface - Part EN IEC 62386-103 2022
103: General requirements - Control
devices
IEC 62386-2XX series Digital addressable lighting interface - Part EN 62386-2XX series
2XX: Particular requirements for control
gear
IEC 62386-102 ®
Edition 3.0 2022-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –

Part 102: General requirements – Control gear

Interface d'éclairage adressable numérique –

Partie 102: Exigences générales – Appareillages de commande

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5965-8

– 2 – IEC 62386-102:2022 © IEC 2022
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 11
4 General . 14
4.1 General . 14
4.2 Version number . 14
5 Electrical specification . 15
6 Bus power supply . 15
7 Transmission protocol structure . 15
7.1 General . 15
7.2 16-bit forward frame encoding . 15
7.2.1 General . 15
7.2.2 Address byte . 15
7.2.3 Opcode byte . 15
8 Timing . 16
9 Method of operation . 16
9.1 General . 16
9.2 Control gear . 16
9.2.1 General . 16
9.2.2 Control gear phases . 16
9.3 Dimming curve . 17
9.4 Calculating "targetLevel" . 20
9.5 Fading . 20
9.5.1 General . 20
9.5.2 Fade time . 21
9.5.3 Fade rate . 22
9.5.4 Extended fade time . 23
9.5.5 Using the fade time . 25
9.5.6 Using the fade rate . 25
9.5.7 System response to changes during a fade . 26
9.5.8 System response to changes during standby and startup . 26
9.5.9 Stopping a fade . 26
9.6 Min and max level . 26
9.7 Commands . 27
9.7.1 General . 27
9.7.2 Level instructions without fade . 27
9.7.3 Level instructions initiating a fade . 28
9.7.4 Configuration instructions . 28
9.7.5 Queries. 28
9.7.6 Special commands. 28
9.7.7 Application extended commands . 28
9.8 Command iterations . 28
9.8.1 General . 28

IEC 62386-102:2022 © IEC 2022 – 3 –
9.8.2 Command iteration of "UP" and "DOWN" commands . 28
9.8.3 DAPC SEQUENCE (deprecated) . 29
9.9 Modes of operation . 30
9.9.1 General . 30
9.9.2 Operating mode 0x00: standard mode . 30
9.9.3 Operating mode 0x01 to 0x7F: reserved . 30
9.9.4 Operating mode 0x80 to 0xFF: manufacturer-specific modes . 30
9.10 Memory banks . 30
9.10.1 General . 30
9.10.2 Memory map . 31
9.10.3 Selecting a memory bank location . 32
9.10.4 Protectable memory locations . 32
9.10.5 Memory bank reading . 32
9.10.6 Memory bank writing . 34
9.10.7 Memory bank 0 . 35
9.10.8 Memory bank 1 (optional) . 37
9.10.9 Manufacturer-specific memory banks . 39
9.10.10 Reserved memory banks . 39
9.11 Reset .
...