EN IEC 60335-2-34:2023/A12:2025

SLOVENSKI STANDARD
01-september-2025
Gospodinjski in podobni električni aparati - Varnost - 2-34. del: Posebne zahteve
za motorne kompresorje - Dopolnilo A12
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements
for motor-compressors
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-34:
Besondere Anforderungen für Motorverdichter
Appareils électrodomestiques et analogues - Sécurité - Partie 2-34: Exigences
particulières pour les motocompresseurs
Ta slovenski standard je istoveten z: EN IEC 60335-2-34:2023/A12:2025
ICS:
23.140 Kompresorji in pnevmatični Compressors and pneumatic
stroji machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-
34:2023/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2025
ICS 97.040.30
English Version
Household and similar electrical appliances - Safety - Part 2-34:
Particular requirements for motor-compressors
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-34: Exigences particulières pour les ähnliche Zwecke - Teil 2-34: Besondere Anforderungen für
motocompresseurs Motorverdichter
This amendment A12 modifies the European Standard EN IEC 60335-2-34:2023; it was approved by CENELEC on 2025-06-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-34:2023/A12:2025 E

Contents Page
European foreword . 3
1 Modification to the Introduction . 4
2 Modification to Clause 6, “Classification” . 4
3 Modification to Clause 7, “Marking and instructions” . 4
4 Modification to Clause 18, “Endurance” . 4
5 Modification to Clause 22, “Construction” . 5
6 Modification to annexes . 5

European foreword
This document (EN IEC 60335-2-34:2023/A12:2025) has been prepared by CLC/TC 61 “Safety of household
and similar electrical appliances”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2026-07-31
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2028-07-31
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-34:2023 and EN IEC 60335-2-34:2023/A11:2023.
The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are additional
to those in the IEC standard are prefixed with the letter “Z”.
This document has been prepared under a standardization request addressed to CENELEC by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZZA and Annex ZZB, which are integral parts
of this document.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
1 Modification to the Introduction
Addition:
This European Amendment A12 supplements or modifies the corresponding clauses of the standards below:
— EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019+A15:2021+A16:2023 (Part 1)
— EN IEC 60335-2-34:2023+A11:2023 (Part 2)
Additional requirements for appliances with power driven parts intended for commercial use are given in
Annex ZE.
This European standard does not deal with any specific requirements on noise emitted from these appliances
the generated noise is not considered to be a relevant hazard. Thus, the emission sound pressure level LpA is
considered to be LpA ≤ 70 dB(A).
2 Modification to Clause 6, “Classification”
6.101 Replace this clause with the following:
“Motor-compressors shall be classified as being tested with Annex AA or without Annex AA.
Motor-compressors shall be classified as being tested with Annex AA only if the motor-compressor in
combination with the motor-compressor protection system or motor-compressor control system, if any,
can be configured to operate so as to deliver maximum cooling capacity, independently of any input sensors
that are only provided as part of the final application.”
3 Modification to Clause 7, “Marking and instructions”
7.12.1 Addition
Motor-compressors technical documentation shall include instructions for installation, servicing and eventual
dismantling and disposal.
Compliance is checked by inspection
7.101 Modification
Motor-compressor technical documentation (published datasheet) shall list the following:
1. refrigerants that can be used with motor-compressor
2. if motor-compressor is classified with or without Annex AA
3. if motor-compressor has incorporated or associated electronic circuit
4. housing internal volume and relative maximum allowable pressure (PS)
5. locked rotor amperage (LRA) for motor-compressors without electronic circuit or with the maximum
current value as measured before cut off for motor-compressors with incorporated or associated
electronic circuit
Compliance is checked by inspection.
4 Modification to Clause 18, “Endurance”
This clause of Part 1 is not applicable.
Delete subclause 18.101.
5 Modification to Clause 22, “Construction”
22.7 Modify the first line of the compliance criteria as follows:
Compliance is checked by the following tests.
6 Modification to annexes
Annex EE
(normative)
Fatigue test
The annex is not applicable.
Annex ZAA
(informative)
The relevance of the Pressure Equipment Directive
Replace Table ZAA.1 with the following:
Table ZAA.1 — Refrigerants classified as Fluid Group 1
Refrigerant Refrigerant name Refrigerant Blended refrigerants
number formula
R-32 difluoromethane CH F
2 2
R-143a 1,1,1-trifluoroethane CF CH
3 3
R-290 propane C H
3 8
R-600 butane C H
4 10
R-600a isobutane CH(CH )
3 3
R-1270 propylene C H
3 6
R-1234yf 2,3,3,3 tetrafluoroprop-1- CF CF = CH
3 2
ene
R-454B - - R-32 (68.9 %) + R-1234yf (31.1 %)
R-454C - - R-32 (21.5 %) + R-1234yf (78.5 %)
R-455A - - R-32 (21.5 %) + R-1234yf (75.5 %) + R744
(3 %)
“
Annex ZC
(normative)
Normative references to inter
...