EN IEC 62722-2-1:2023
(Main)Luminaire performance - Part 2-1: Particular requirements - LED luminaires
Luminaire performance - Part 2-1: Particular requirements - LED luminaires
IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
alignment with IEC 62717:2014, IEC 62717:2014/AMD1:2015 and IEC 62717:2014/AMD2:2019;
clarification of temperature requirements for the maintenance test, in 10.2 and Annex A;
introduction of a new Annex C on methods for calculation and measurements of parameters for extension of electric and photometric data.
Arbeitsweise von Leuchten - Teil 2-1: Besondere Anforderungen - LED-Leuchten
Performance des luminaires - Partie 2-1: Exigences particulières - Luminaires à LED
L'IEC 62722-2-1:2023 spécifie les exigences de performance relatives aux luminaires à LED, ainsi que les méthodes et conditions d'essai. Elle s'applique aux luminaires à LED destinés à l'éclairage général. Les semi-luminaires ne relèvent pas du domaine d'application du présent document. Cette deuxième édition annule et remplace la première édition parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
alignement sur l'IEC 62717:2014, l'IEC 62717:2014/AMD1:2015 et l'IEC 62717:2014/AMD2:2019;
clarification des exigences de température pour l'essai de conservation en 10.2 et à l'Annexe A;
introduction d'une nouvelle Annexe C sur les méthodes de calcul et les mesurages des paramètres pour la transposition des données électriques et photométriques.
Tehnične lastnosti svetilk - 2-1. del: Posebne zahteve - LED-svetilke (IEC 62722-2-1:2023)
Standard IEC 62722-2-1:2023 določa zahteve glede zmogljivosti za svetilke LED skupaj s preskusnimi metodami in pogoji. Uporablja se za svetilke LED za namene splošnega osvetljevanja. Polsvetilke ne spadajo na področje uporabe tega dokumenta. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2014. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
uskladitev s standardi IEC 62717:2014, IEC 62717:2014/AMD1:2015 in IEC 62717:2014/AMD2:2019; pojasnitev zahtev glede temperature za preskus vzdrževanja v točki 10.2 in dodatku A; uvedba novega dodatka C o metodah za izračunavanje in merjenje parametrov za razširitev električnih in fotometričnih podatkov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62722-2-1:2023
01-maj-2023
Tehnične lastnosti svetilk - 2-1. del: Posebne zahteve - LED-svetilke (IEC 62722-2-
1:2023)
Luminaire performance - Part 2-1: Particular requirements - LED luminaires (IEC 62722-
2-1:2023)
Arbeitsweise von Leuchten - Teil 2-1: Besondere Anforderungen an LED-Leuchten (IEC
62722-2-1:2023)
Performance des luminaires - Partie 2-1: Exigences particulières relatives aux luminaires
à LED (IEC 62722-2-1:2023)
Ta slovenski standard je istoveten z: EN IEC 62722-2-1:2023
ICS:
29.140.40 Svetila Luminaires
SIST EN IEC 62722-2-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62722-2-1:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62722-2-1:2023
EUROPEAN STANDARD EN IEC 62722-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2023
ICS 29.140.40 Supersedes EN 62722-2-1:2016
English Version
Luminaire performance - Part 2-1: Particular requirements - LED
luminaires
(IEC 62722-2-1:2023)
Performance des luminaires - Partie 2-1: Exigences Arbeitsweise von Leuchten - Teil 2-1: Besondere
particulières - Luminaires à LED Anforderungen an LED-Leuchten
(IEC 62722-2-1:2023) (IEC 62722-2-1:2023)
This European Standard was approved by CENELEC on 2023-02-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62722-2-1:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62722-2-1:2023
EN IEC 62722-2-1:2023 (E)
European foreword
The text of document 34D/1680/FDIS, future edition 2 of IEC 62722-2-1, prepared by SC 34D
"Luminaires" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 62722-2-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-11-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-02-28
document have to be withdrawn
This document supersedes EN 62722-2-1:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62722-2-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62442-3 NOTE Approved as EN IEC 62442-3
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62722-2-1:2023
EN IEC 62722-2-1:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.