EN IEC 62153-4-16:2021

SLOVENSKI STANDARD
01-december-2021
Preskusne metode za kovinske kable in druge pasivne komponente - 4-16. del:
Elektromagnetna združljivost (EMC) - Razširitev frekvenčnega območja na višje
frekvence za merjenje prenosne impedance in na nižje frekvence za merjenje
zaslonskega slabljenja z uporabo triosne nastavitve (IEC 62153-4-16:2021)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic
compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer
impedance and to lower frequencies for screening attenuation measurements using the
triaxial set-up (IEC 62153-4-16:2021)
Prüfverfahren für metallische Kommunikationskabel - Teil 4-16: Elektromagnetische
Verträglichkeit (EMV) – Erweiterung des Frequenzbereiches zu höheren Frequenzen für
den Kopplungswiderstand und zu niedrigeren Frequenzen für die Schirmdämpfung bei
Messungen mit dem Triaxialverfahren (IEC 62153-4-16:2021)
Méthodes d'essai des câbles métalliques et autres composants passifs - Partie 4-16:
Compatibilité électromagnétique (CEM) - Extension de la plage de fréquences à des
fréquences supérieures pour l'impédance de transfert et à des fréquences inférieures
pour mesurer l'affaiblissement d'écran à l'aide d'un montage triaxial (IEC 62153-4-
16:2021)
Ta slovenski standard je istoveten z: EN IEC 62153-4-16:2021
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62153-4-16

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 33.120.10
English Version
Metallic cables and other passive components test methods -
Part 4-16: Electromagnetic compatibility (EMC) - Extension of
the frequency range to higher frequencies for transfer
impedance and to lower frequencies for screening attenuation
measurements using the triaxial set-up
(IEC 62153-4-16:2021)
Méthodes d'essai des câbles métalliques et autres Prüfverfahren für metallische Kommunikationskabel - Teil 4-
composants passifs - Partie 4-16: Compatibilité 16: Elektromagnetische Verträglichkeit (EMV) - Erweiterung
électromagnétique (CEM) - Extension de la plage de des Frequenzbereiches zu höheren Frequenzen für den
fréquences à des fréquences supérieures pour l'impédance Kopplungswiderstand und zu niedrigeren Frequenzen für
de transfert et à des fréquences inférieures pour mesurer die Schirmdämpfung bei Messungen mit dem
l'affaiblissement d'écran à l'aide d'un montage triaxial Triaxialverfahren
(IEC 62153-4-16:2021) (IEC 62153-4-16:2021)
This European Standard was approved by CENELEC on 2021-09-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62153-4-16:2021 E

European foreword
The text of document 46/817/FDIS, future edition 2 of IEC 62153-4-16, prepared by IEC/TC 46
“Cables, wires, waveguides, RF connectors, RF and microwave passive components and
accessories” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–06–28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–09–28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62153-4-16:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62153-4-3 2013 Metallic communication cable test methods - -
- Part 4–3: Electromagnetic compatibility
(EMC) - Surface transfer impedance -
Triaxial method
IEC 62153-4-15 - Metallic cables and other passive EN IEC 62153-4-15 -
components test methods - Part 4–15:
Electromagnetic compatibility (EMC) - Test
method for measuring transfer impedance
and screening attenuation - or coupling
attenuation with triaxial cell

IEC 62153-4-16 ®
Edition 2.0 2021-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Metallic cables and other passive components test methods –

Part 4-16: Electromagnetic compatibility (EMC) – Extension of the frequency

range to higher frequencies for transfer impedance and to lower frequencies for

screening attenuation measurements using the triaxial set-up

Méthodes d’essai des câbles métalliques et autres composants passifs –

Partie 4-16: Compatibilité électromagnétique (CEM) – Extension de la plage de

fréquences à des fréquences supérieures pour l’impédance de transfert et à des

fréquences inférieures pour mesurer l’affaiblissement d’écran à l’aide d’un

montage triaxial
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-1010-1

– 2 – IEC 62153-4-16:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 Overview . 6
5 Frequency behaviour of the triaxial set-up . 7
6 Extrapolation of transfer impedance measurement results . 9
6.1 General . 9
6.2 Example of a measurement according to IEC 62153-4-3, Method B . 9
6.3 Example of a measurement according to IEC 62153-4-3, Method C . 10
7 Extrapolation of screening attenuation measurement results . 12
8 Determination of the relative dielectric permittivity and impedance of the inner and
outer circuits . 14
8.1 General . 14
8.2 Influence of the test head . 17
Bibliography . 20

Figure 1 – Simulation of the scattering parameter S (left hand scale) and the transfer
impedance (right hand scale) for a single braid screen . 7
Figure 2 – Comparison of formulae for conversion between forward transfer scattering
parameter and transfer impedance . 9
Figure 3 – Example of the extrapolation of the transfer impedance of an RG59 type
cable. 10
Figure 4 – Measurement of transfer impedance of a single braided cable . 11
Figure 5 – Conversion of measured scattering parameter S to the transfer impedance
M
of a single braided cable . 12
Figure 6 – Example of the extrapolation of the scattering parameter S in logarithmic
frequency scale of an RG59 type cable . 13
Figure 7 – Example of the extrapolation of the scattering parameter S in linear
frequency scale of an RG59 type cable . 14
Figure 8 – Measurement of S of the outer circuit (tube) having a length of 203 cm . 16
Figure 9 – Example of test head (COMET set-up) . 17
Figure 10 – Example of how to obtain the electrical length of the test head from the
S measurement using a bare copper wire as DUT (COMET set-up) . 18
Figure 11 – Example of an RG58 type cable in 2 m triaxial set-up (COMET) . 19

Table 1 – Parameters for simulation of triaxial set-up . 8

IEC 62153-4-16:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
METALLIC CABLES AND OTHER
PASSIVE COMPONENTS TEST METHODS –

Part 4-16: Electromagnetic compatibility (EMC) –
Extension of the frequency range to higher frequencies
for transfer impedance and to lower frequencies for screening
attenuation measurements using the triaxial set-up

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterp
...