EN 62827-3:2017

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Drahtlose Energieübertragung - Management - Teil 3: Mehrfachquellen Steuerungsmanagement (IEC 62827-3:2016)Transfert de puissance sans fil - Gestion - Partie 3: Gestion du contrôle de sources multiples (IEC 62827-3:2016)Wireless Power Transfer - Management - Part 3: Multiple sources control management (IEC 62827-3:2016)35.240.99IT applications in other fields29.240.99Other equipment related to power transmission and distribution networksICS:Ta slovenski standard je istoveten z:EN 62827-3:2017SIST EN 62827-3:2018en,fr,de01-februar-2018SIST EN 62827-3:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62827-3
March 2017 ICS 43.120
English Version
Wireless power transfer - Management -
Part 3: Multiple source control management (IEC 62827-3:2016)
Transfert de puissance sans fil - Gestion -
Partie 3: Gestion du contrôle de sources multiples (IEC 62827-3:2016)
Drahtlose Energieübertragung - Management -
Teil 3: Mehrfachquellen Steuerungsmanagement (IEC 62827-3:2016) This European Standard was approved by CENELEC on 2017-01-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62827-3:2017 E SIST EN 62827-3:2018

The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-18 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-01-18
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62827-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62827-2 NOTE Harmonized as EN 62827-2 1.
1 At draft stage. SIST EN 62827-3:2018

Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu
Publication Year Title EN/HD Year
IEC 62827-1 -
Wireless power transfer - Management - Part 1: Common components EN 62827-1 -
IEC 62827-3 Edition 1.0 2016-12 INTERNATIONAL STANDARD
Wireless power transfer – Management –
Part 3: Multiple source control management
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 43.120
ISBN 978-2-8322-3683-3
– 2 – IEC 62827-3:2016 © IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 7 3.1 Terms and definitions . 7 3.2 Abbreviated terms . 9 4 Basic overview of WPMS . 9 5 Requirements in WPMSs . 11 5.1 General model for WPMSs . 11 5.2 Required functionalities. 11 5.2.1 General . 11 5.2.2 Consideration for mismatch of receiving power and required power . 13 5.2.3 Wireless power distribution . 13 5.3 Message type by WPMS-S . 13 6 Control and management method on WPMS . 14 6.1 Formation of WPMS-S group . 14 6.2 Preparation of wireless power transfer for multiple WPMS-Ds . 15 6.2.1 WPMS-D identification and authentication . 15 6.2.2 Reception of power transfer information of WPMS-Ds . 15 6.2.3 Detection of WPMS-D positions . 16 6.2.4 Setting of the WPMS-S power transmitting condition . 16 6.3 Wireless power transfer mode . 18 6.3.1 General . 18 6.3.2 Wireless power distribution . 18 6.3.3 Synchronizing method of magnetic fields in WPMS . 18 6.4 Reconfiguration of WPMS . 19 6.4.1 General . 19 6.4.2 Completion and resumption of wireless power transfer . 19 6.4.3 Appearance and disappearance of WPMS-D. 20 6.4.4 Appearance and disappearance of WPMS-S . 20 6.5 Power transfer to WPMS-D with a flat battery. 20 6.6 Termination of wireless power transfer . 20 Bibliography . 21
Figure 1 – Conceptual image of WPMS: Example 1 . 9 Figure 2 – Conceptual image of WPMS: Example 2 . 10 Figure 3 – Conceptual image of WPMS: Example 3 . 10 Figure 4 – Structure of a WPMS . 11 Figure 5 – Overall procedure of WPMSs . 12 Figure 6 – Reception of power transfer information of WPMS-Ds . 15 Figure 7 – Completion and resumption of wireless power transfer . 19
Table 1 – Message type . 14 Table 2 – Notices of WPMS-S . 15 SIST EN 62827-3:2018

IEC 62827-3:2016 © IEC 2016 – 3 –
Table 3 – Configuration on mutual work areas . 16 Table 4 – Find WPMS-D . 16 Table 5 – Request for sending power information . 17 Table 6 – Exchange manageable WPMS-D . 17 Table 7 – Notify power transfer setting . 17 Table 8 – Suspend power transfer . 20
– 4 – IEC 62827-3:2016 © IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION ______________
WIRELESS POWER TRANSFER –
MANAGEMENT –
Part 3: Multiple source control management
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62827-3 has been prepared by technical area 15: Wireless power transfer, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 100/2604/CDV 100/2724/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62827 series, published under the general title Wireless power transfer – Management, can be found on the IEC website. SIST EN 62827-3:2018
...