iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50144-2-4:1999

(Main)

Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders

Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders

This clause of Part 1 is applicable execpt as follows: 1.1. Addition: This European Standard applies to hand-held reciprocating sanders, belt sanders orbital sanders and random orbital sanders. It does not apply to disc type sanders which are covered by EN 50144-2-3 (in preparation). This standard does not give requirements for the design of the tool for the reduction of the risk arising from noise and vibration.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge - Teil 2-4: Besondere Anforderungen für Schwing- und Bandschleifer

Sécurité des outils électroportatifs à moteur - Partie 2-4: Règles particulières pour les ponceuses

Varnost električnih ročnih orodij - 2-4. del: Posebne zahteve za brusilnike

General Information

Status
Withdrawn
Publication Date
28-Nov-1999
Withdrawal Date
30-Nov-2001
ICS
25.080.50 - Grinding and polishing machines
25.140.20 - Electric tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
IEC/TC 116 - Safety of hand-held motor-operated electric tools
Parallel Committee
IEC/SC 61F - IEC_SC_61F --> TC 116
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2006
Completion Date
01-Feb-2006
Directive
98/37/EC - Machinery
Mandate
M/083 - Machinery
Ref Project
SIST EN 50144-2-4:2000 - Safety of hand-held electric motor operated tools -- Part 2-4: Particular requirements for sanders

Relations

Replaced By
EN 60745-2-4:2003 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
Effective Date
28-Jan-2023

Buy Standard

EN 50144-2-4:2000EN 50144-2-4:2000
PreviousNext
Standard
EN 50144-2-4:2000
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2000
1DGRPHãþD
SIST EN 50144-2-4:1999
9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DEUXVLOQLNH
Safety of hand-held electric motor operated tools -- Part 2-4: Particular requirements for
sanders
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-4: Besondere
Anforderungen für Schwing- und Bandschleifer
Sécurité des outils électroportatifs à moteur -- Partie 2-4: Règles particulières pour les
ponceuses
Ta slovenski standard je istoveten z: EN 50144-2-4:1999
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60745-2-4:2009(Main)
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
SIST EN 60745-2-4:2010

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60745-2-4:2009(Main)
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
SIST EN 60745-2-4:2010

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-27-2:2020/A1:2024(Amendment)
Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
SIST EN IEC 60317-27-2:2020/oprA1:2023
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50463-5:2017/A1:2024(Amendment)
Railway applications - Energy measurement on board trains - Part 5: Conformity assessment
SIST EN 50463-5:2018/fprA1:2024

This New Work Item Proposal has the scope to provide an amendment of the European standard EN 50463-5 in order to update the annex ZZ

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60317-12:2020/A1:2024(Amendment)
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
SIST EN IEC 60317-12:2020/oprA1:2023
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60794-1-209:2024(Main)
Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, method F9
kSIST FprEN IEC 60794-1-209:2024

IEC 60794-1-209:2024 defines test procedures to be used in establishing uniform requirements for the environmental performance of: - optical fibre cables for use with telecommunication equipment and devices employing similar techniques; and - cables having a combination of both optical fibres and electrical conductors. Throughout this document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This document defines a test standard to determine cable aging performance by high temperature exposure and temperature cycling in order to simulate lifetime behaviour of the attenuation of cables, or physical attributes. See IEC 60794‑1‑2 for a reference guide to test methods of all types and for general requirements and definitions. This document partially cancels and replaces IEC 60794‑1‑22:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794‑1‑22:2017: a) the ambient temperature test condition has been defined as per IEC 60794‑1‑2; b) all the maximum allowable attenuation increase values for single-mode and multimode fibres have been deleted, and have been included in the list of details to be specified.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60794-1-201:2024(Main)
Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1
kSIST FprEN IEC 60794-1-201:2024

IEC 60794-1-201: 2024 defines test procedures to be used in establishing uniform requirements for the environmental performance of: - optical fibre cables for use with telecommunication equipment and devices employing similar techniques; and - cables having a combination of both optical fibres and electrical conductors. Throughout this document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This document defines a test standard to determine the ability of a cable to withstand the effects of temperature cycling by observing changes in attenuation. See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements and definitions. This document partially replaces IEC 60794-1-22:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794-1-22:2017: a) all references to the temperature sensing device have been removed and replaced with a note "for further study"; b) the conditioning procedure has been separated into Procedure 1 and Procedure 2 to avoid confusion; c) the ambient temperature test condition has been defined as per IEC 60794-1-2; d) the minimum soak time has been decreased for sample mass >16 kg in Table 1.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60598-2-20:2024(Main)
Luminaires - Part 2-20: Particular requirements - Lighting chains
SIST EN IEC 60598-2-20:2024

IEC 60598-2-20:2022 is available as IEC 60598-2-20:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60598-2-20:2022 specifies requirements for lighting chains fitted with series, parallel or a combination of series/parallel connected light sources for use either indoors or outdoors on supply voltages not exceeding 250 V. This fifth edition cancels and replaces the fourth edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - specific provisions for temporarily installed protected lighting (TPL) chains have been added; - new terms and definitions have been added.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61340-5-1:2024(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
SIST EN IEC 61340-5-1:2024

IEC 61340-5-1:2024 applies to organizations that: manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies and equipment with withstand voltages greater than or equal to 100 V human body model (HBM) and 200 V charge device model (CDM). Also, protection from isolated conductors is addressed by limiting the voltage on isolated conductors to less than 35 V. ESDS with lower withstand voltages can require additional control elements or adjusted limits. Processes designed to handle items that have lower ESD withstand voltage(s) can still claim compliance to this document. This document provides the requirements for an ESD control program. IEC TR 61340-5-2 provides guidance on the implementation of this document. This document does not apply to electrically initiated explosive devices, flammable liquids, gases, and powders. The purpose of this document is to provide the administrative and technical requirements for establishing, implementing, and maintaining an ESD control program (hereinafter referred to as the “program”). This edition includes the following significant technical changes with respect to the previous edition: a) definitions have been added to the document; b) updates to product qualification requirements; c) subclause 5.3.3 now includes a reference to groundable static control garment systems; d) Table 2 was replaced; e) subclause 5.3.4.2 was updated to define what an insulator is; f) subclause 5.3.4.3 was updated to include a definition for isolated conductor; g) Table 3 was updated, technical items added, including a reference to IEC 61340-5-4 for compliance verification testing; h) Table 4 was added as a summary of the requirements in IEC 61340-5-3 and to include requirements for compliance verification of packaging; i) Annex A was replaced: the former Annex is no longer required. Annex A are examples of tailoring.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61788-23:2024(Main)
Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
SIST EN IEC 61788-23:2024

IEC 61788-23:2024 is available as IEC 61788-23:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61788-23:2024 addresses a test method for the determination of the residual resistance ratio (RRR), rRRR, of cavity-grade niobium. This method is intended for high-purity niobium grades with 150 < rRRR < 600. The test method is valid for specimens with rectangular or round cross-section, cross-sectional area greater than 1 mm2 but less than 20 mm2, and a length not less than 10 nor more than 25 times the width or diameter.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day