EN 60384-14:2013

SLOVENSKI STANDARD
01-maj-2014
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLKQDSUDYDKGHO3RGURþQD
VSHFLILNDFLMD)LNVQLNRQGHQ]DWRUML]DGXãHQMHHOHNWURPDJQHWQHJDPRWHQMDLQ]D
SRYH]RYDQMH]RPUHåQLPQDSDMDQMHP,(&
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed
capacitors for electromagnetic interference suppression and connection to the supply
mains
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 14:
Rahmenspezifikation - Festkondensatoren zur Unterdrückung elektromagnetischer
Störungen, geeignet für Netzbetrieb
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14:
Spécification intermédiaire - Condensateurs fixes d'antiparasitage et raccordement à
l'alimentation
Ta slovenski standard je istoveten z: EN 60384-14:2013
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-14
NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM
ICS 31.060.10 Supersedes EN 60384-14:2005

English version
Fixed capacitors for use in electronic equipment -
Part 14: Sectional specification -
Fixed capacitors for electromagnetic interference suppression and
connection to the supply mains
(IEC 60384-14:2013)
Condensateurs fixes utilisés dans les Festkondensatoren zur Verwendung in
équipements électroniques - Geräten der Elektronik -
Partie 14: Spécification intermédiaire - Teil 14: Rahmenspezifikation -
Condensateurs fixes d'antiparasitage et Festkondensatoren zur Unterdrückung
raccordement à l'alimentation elektromagnetischer Störungen, geeignet
(CEI 60384-14:2013) für Netzbetrieb
(IEC 60384-14:2013)
This European Standard was approved by CENELEC on 2013-07-10. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-14:2013 E
Foreword
The text of document 40/2199/FDIS, future edition 4 of IEC 60384-14, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60384-14:2013.
The following dates are fixed:
(dop) 2014-04-10
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-07-10
• latest date by which the national

standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-14:2005.

EN 60384-14:2005:
All changes that have been agreed upon can be categorized as minor revisions.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60384-14:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60335-1 NOTE Harmonised as EN 60335-1.
IEC 60384-14-3 NOTE Harmonised as EN 60384-14-3.
IEC 60950-1 NOTE Harmonised as EN 60950-1.
IEC 61140 NOTE Harmonised as EN 61140.

- 3 - EN 60384-14:2013
Annex ZA
(normative)
Normative references to i nternational publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60060-1 2010 High-voltage test techniques - EN 60060-1 2010
Part 1: General definitions and test
requirements
IEC 60063 Preferred number series for resistors and - -
capacitors
IEC 60065 (mod) 2001 Audio, video and similar electronic apparatus EN 60065 2002
+ corr. August 2002 - Safety requirements + corr. August 2007
+ A1 (mod) 2005 + A1 2006
+ A2 (mod) 2010 + A2 2010
- - + A11
- - + A12
1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
+ corr. October 1988 Part 1: General and guidance

IEC 60068-2-17 Environmental testing - EN 60068-2-17
Part 2: Tests - Test Q: Sealing

IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
+ corr. November 2008 equipment -
Part 1: Generic specification
2) 3)
IEC 60417 Data Graphical symbols for use on equipment HD 243 S12
base
4) 5)
IEC 60664-1 Insulation coordination for equipment within EN 60664-1
low-voltage systems -
Part 1: Principles, requirements and tests

IEC 60695-11-10 Fire hazard testing - EN 60695-11-10
Part 11-10: Test flames - 50 W horizontal
and vertical flame test methods

IEC 60940 Guidance information on the application of - -
capacitors, resistors, inductors and complete
filter units for radio interference suppression

IEC 61193-2 Quality assessment systems - EN 61193-2
Part 2: Selection and use of sampling plans
for inspection of electronic components and
packages
1)
EN 60068-1 includes A1 to IEC 60068-1
+ corr. October .
2)
HD 243 S12 includes supplement(s) M to K to IEC 60417.
3)
HD 243 S12 is superseded by EN 60417-2:1999, which is based on IEC 60417-2:1998.
4)
EN 60664-1 includes A1 + A2 to IEC 60664-1.
5)
EN 60664-1 is superseded by EN 60664-1:2007, which is based on IEC 60664-1:2007.

Publication Year Title EN/HD Year
IEC 61210 (mod)  Connecting devices - Flat quick-connect EN 61210
terminations for electrical copper conductors
- Safety requirements
CISPR 17 Methods of measurement of the suppression EN 55017
characteristics of passive EMC filtering
devices
ISO 7000 Graphical symbols for use on equipment - - -
Registered symbols
IEC 60384-14 ®
Edition 4.0 2013-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 14: Sectional specification – Fixed capacitors for electromagnetic

interference suppression and connection to the supply mains

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 14: Spécification intermédiaire – Condensateurs fixes d'antiparasitage

et raccordement à l'alimentation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 31.060.10 ISBN 978-2-83220-828-1

– 2 – 60384-14 © IEC:2013
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 9
1.4.1 Outline drawing and dimensions . 9
1.4.2 Mounting . 9
1.4.3 Ratings and characteristics . 10
1.4.4 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 15
1.6.1 Marking of capacitors . 15
1.6.2 Marking of packaging. 15
1.6.3 Additional marking . 16
1.7 Classification of Class X and Class Y capacitors . 16
1.7.1 Classification of X capacitors . 16
1.7.2 Classification of Y capacitors . 16
2 Preferred ratings and characteristics . 17
2.1 Preferred characteristics . 17
2.1.1 Preferred climatic categories . 17
2.2 Preferred values of ratings . 18
2.2.1 Nominal capacitance (C ) . 18
N
2.2.2 Tolerance on nominal capacitance . 18
2.2.3 Rated voltage (U ) . 18
R
2.2.4 Nominal resistance (R ) . 18
N
2.2.5 Rated temperature . 18
2.2.6 Passive flammability . 18
2.3 Requirements for sleeving, tape, tubing and wire insulation . 18
3 Assessment procedures . 19
3.1 Primary stage of manufacture . 19
3.2 Structurally similar components . 19
3.3 Certified records of released lots . 19
3.4 Approval testing . 19
3.4.1 Safety tests only approval. 19
3.4.2 Qualification approval . 19
3.4.3 Qualification approval on the basis of the fixed sample size
procedure . 19
3.5 Quality conformance inspection . 30
3.5.1 Formation of inspection lots . 30
3.5.2 Test schedule . 31
3.5.3 Delayed delivery . 31
3.5.4 Assessment level . 31
4 Test and measurement procedures . 32
4.1 Visual examination and check of dimensions . 32
4.1.1 Creepage distances and clearances . 32

60384-14 © IEC:2013 – 3 –
4.2 Electrical tests .
...