EN IEC 60384-14:2023/A1:2025

SLOVENSKI STANDARD
01-oktober-2025
Nespremenljivi kondenzatorji za elektronsko opremo - 14. del: Področna
specifikacija - Nespremenljivi kondenzatorji za dušenje elektromagnetnega
motenja in za povezovanje z omrežnim napajanjem - Dopolnilo A1 (IEC 60384-
14:2023/AMD1:2025)
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed
capacitors for electromagnetic interference suppression and connection to the supply
mains (IEC 60384-14:2023/AMD1:2025)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 14:
Rahmenspezifikation - Festkondensatoren zur Unterdrückung elektromagnetischer
Störungen, geeignet für Netzbetrieb (IEC 60384-14:2023/AMD1:2025)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 14:
Spécification intermédiaire - Condensateurs fixes pour la suppression des interférences
électromagnétiques et la connexion au réseau d’alimentation (IEC 60384-
14:2023/AMD1:2025)
Ta slovenski standard je istoveten z: EN IEC 60384-14:2023/A1:2025
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60384-14:2023/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2025
ICS 31.060.10
English Version
Fixed capacitors for use in electronic equipment - Part 14:
Sectional specification - Fixed capacitors for electromagnetic
interference suppression and connection to the supply mains
(IEC 60384-14:2023/AMD1:2025)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 14: Spécification intermédiaire - Elektronik - Teil 14: Rahmenspezifikation -
Condensateurs fixes pour la suppression des interférences Festkondensatoren zur Unterdrückung elektromagnetischer
électromagnétiques et la connexion au réseau Störungen, geeignet für Netzbetrieb
d'alimentation (IEC 60384-14:2023/AMD1:2025)
(IEC 60384-14:2023/AMD1:2025)
This amendment A1 modifies the European Standard EN IEC 60384-14:2023; it was approved by CENELEC on 2025-08-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-14:2023/A1:2025 E

European foreword
The text of document 40/3220/FDIS, future edition 5 of IEC 60384-14/AMD1, prepared by TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-14:2023/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-08-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-08-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60384-14:2023/AMD1:2025 was approved by CENELEC as
a European Standard without any modification.

IEC 60384-14 ®
Edition 5.0 2025-07
INTERNATIONAL
STANDARD
AMENDMENT 1
Fixed capacitors for use in electronic equipment -
Part 14: Sectional specification - Fixed capacitors for electromagnetic
interference suppression and connection to the supply mains
ICS 31.060.10  ISBN 978-2-8327-0527-8

IEC 60384-14:2023-01/AMD1:2025-07(en)

IEC 60384-14:2023/AMD1:2025 © IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Fixed capacitors for use in electronic equipment -
Part 14: Sectional specification - Fixed capacitors for electromagnetic
interference suppression and connection to the supply mains

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniform
...