EN 60384-14:2005

SLOVENSKI SIST EN 60384-14:2006

STANDARD
marec 2006
Pritrjeni kondenzatorji za uporabo v elektronskih napravah – 14. del:
Področna specifikacija – Pritrjeni kondenzatorji za dušenje
elektromagnetnega motenja in za povezovanje z omrežnim napajanjem (IEC
60384-14:2005)
Fixed capacitors for use in electronic equipment – Part 14: Sectional specification –
Fixed capacitors for electromagnetic interference suppression and connection to
the supply mains (IEC 60384-14:2005)
ICS 31.060.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

INTERNATIONAL IEC
STANDARD 60384-14
QC 302400
Third edition
2005-07
Fixed capacitors for use in
electronic equipment –
Part 14:
Sectional specification:
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XA
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 60384-14  IEC:2005(E)
CONTENTS
FOREWORD ……………………………………………………………………………………………….3

1 General .7
1.1 Scope.7
1.2 Object .7
1.3 Normative references .7
1.4 Information to be given in a detail specification .8
1.5 Terms and definitions .9
1.6 Marking .15
2 Preferred ratings and characteristics.16
2.1 Preferred characteristics.16
2.2 Preferred values of ratings.16
3 Assessment procedures.17
3.1 Primary stage of manufacture .17
3.2 Structurally similar components .17
3.3 Certified records of released lots.17
3.4 Approval testing.17
3.5 Quality conformance Inspection .27
4 Test and measurement procedures .30
4.1 Visual examination and check of dimensions .30
4.2 Electrical tests.30
4.3 Robustness of terminations.33
4.4 Resistance to soldering heat.34
4.5 Solderability .34
4.6 Rapid change of temperature .34
4.7 Vibration.35
4.8 Bump .35
4.9 Shock.36
4.10 Container sealing .36
4.11 Climatic sequence .36
4.12 Damp heat, steady state .38
4.13 Impulse voltage .38
4.14 Endurance.40
4.15 Charge and discharge.42
4.16 Radiofrequency characteristics .43
4.17 Passive flammability test .43
4.18 Active flammability test .44
4.19 Component solvent resistance (if applicable).46
4.20 Solvent resistance of the marking .46

Annex A (normative) Circuit for the impulse voltage test .47
Annex B (normative) Circuit for the endurance test .48
Annex C (normative) Circuit for the charge and discharge test .49

60384-14  IEC:2005(E) – 3 –
Annex D (normative) Declaration of design (confidential to the manufacturer and the
certification body) .50
Annex E (informative) Pulse test circuits .51
Annex F (normative) Particular requirements for safety test of surface mounting
capacitors.53
Annex G (informative) Capacitance ageing of fixed capacitors of ceramic dielectric,
Class 2.56

– 4 – 60384-14  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 14: Sectional specification:
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-14 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This third edition cancels and replaces the second edition published in 1993 and amendment 1
(1995). It constitutes a technical revision. All changes that have been agreed upon can be
categorized as minor revisions.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1552/FDIS 40/1586/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60384-14  IEC:2005(E) – 5 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60384 consists of the following parts, under the general title Fixed capacitors for use in
electronic equipment:
Part 1: Generic specification
Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
d.c. capacitors
Part 3: Sectional specification: Fixed tantalum chip capacitors
Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid
electrolyte
Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage
not exceeding 3 000 V - Selection of methods of test and general requirements
Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c.
capacitors
Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors
Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
Part 11: Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal
foil d.c. capacitors – Assessment level E
Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c.
capacitors
Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c.
capacitors
Part 14: Sectional specification: Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid
electrolyte
Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c.
capacitors
Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and
pulse capacitors
Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and
non-solid electrolyte
Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric
chip d.c. capacitors
Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric chip
d.c. capacitors
Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 1
Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 2
– 6 – 60384-14  IEC:2005(E)
The QC number that appears on the front cover of this publication is the specification number in the
IEC Quality Assessment System for Electronic Components (IECQ).
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.

60384-14  IEC:2005(E) – 7 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 14: Sectional specification:
Fixed capacitors for electromagnetic interference suppression
and connection to the supply mains

1 General
1.1 Scope
...