EN 60999-1:1993
(Main)Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors - Part 1: General requirements and particular requirements for conductors from 0,5 mm² up to 35 mm² (included)
Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors - Part 1: General requirements and particular requirements for conductors from 0,5 mm² up to 35 mm² (included)
Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 228), rigid (solid or stranded) and/or flexible, having a cross-sectional area of 0.5 mm2 up to and including 35 mm2 and equivalent AWG sizes with a rated voltage not exceeding 1 000 V a.c. with a frequency up to and including 1 000 Hz, and 1 500 V d.c. Has the status of a group safety publication in accordance with IEC Guide 104.
Verbindungsmaterial - Sicherheitsanforderungen für Schraubklemmstellen und schraubenlose Klemmstellen für elektrische Kupferleiter - Teil 1: Allgemeine Anforderungen für Leiter von 0,5 mm² bis 35 mm² (einschließlich)
Dispositifs de connexion - Prescriptions de sécurité pour organes de serrage à vis et sans vis pour conducteurs électriques en cuivre - Partie 1: Prescriptions générales et prescriptions particulières pour conducteurs de 0,5 mm² à 35 mm² (inclus)
S'applique aux organes de serrage à vis et sans vis pour dispositifs de connexion, soit en tant que parties séparées, soit en tant que parties intégrantes du matériel pour la connexion de conducteurs électriques en cuivre (conformes à la CEI 228), rigides (massifs ou câblés) et souples, ayant une section de 0,5 mm2 jusqu'à et y compris 35 mm2 et de tailles équivalentes AWG avec une tension assignée ne dépassant pas 1 000 V en courant alternatif, de fréquence jusqu'à et y compris 1 000 Hz, et 1 500 V en courant continu. A le statut d'une publication groupée de sécurité conformément au Guide 104.
Povezovalne naprave - Varnostne zahteve za vijačne in brezvijačne pritrdilne enote za električne bakrene vodnike - 1. del: Splošne in posebne zahteve za vodnike od 0,2 mm2 do vključno 35 mm2 (IEC 60999-1:1990, spremenjen)
General Information
- Status
- Withdrawn
- Publication Date
- 24-Aug-1993
- Technical Committee
- CLC/TC 23BX - CLC_TC_23BX
- Drafting Committee
- IEC/TC 23 - IEC_TC_23
- Parallel Committee
- IEC/SC 23F - IEC_SC_23F
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jan-2003
- Completion Date
- 01-Jan-2003
Relations
- Effective Date
- 29-Jan-2023
- Effective Date
- 09-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Referred By
EN 61812-1:1996 - Specified time relays for industrial use - Part 1: Requirements and tests - Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Referred By
EN 61243-5:2001 - Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) - Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Frequently Asked Questions
EN 60999-1:1993 is a standard published by CLC. Its full title is "Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors - Part 1: General requirements and particular requirements for conductors from 0,5 mm² up to 35 mm² (included)". This standard covers: Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 228), rigid (solid or stranded) and/or flexible, having a cross-sectional area of 0.5 mm2 up to and including 35 mm2 and equivalent AWG sizes with a rated voltage not exceeding 1 000 V a.c. with a frequency up to and including 1 000 Hz, and 1 500 V d.c. Has the status of a group safety publication in accordance with IEC Guide 104.
Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 228), rigid (solid or stranded) and/or flexible, having a cross-sectional area of 0.5 mm2 up to and including 35 mm2 and equivalent AWG sizes with a rated voltage not exceeding 1 000 V a.c. with a frequency up to and including 1 000 Hz, and 1 500 V d.c. Has the status of a group safety publication in accordance with IEC Guide 104.
EN 60999-1:1993 has the following relationships with other standards: It is inter standard links to EN 60999-1:2000, EN 54-11:2001, HD 60269-2:2010, EN 60335-1:1994, HD 630.3.1 S2:1997, EN 60669-1:1995/A2:1996, EN 61812-1:1996, EN 61076-2-113:2017, EN 61243-5:2001, EN 61643-11:2002, EN 61076-2-104:2014, EN 61558-1:1997, EN 60065:1998, EN 60998-2-4:1993, EN 61242:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60999-1:1993 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60999-1:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2000
3RYH]RYDOQHQDSUDYH9DUQRVWQH]DKWHYH]DYLMDþQHLQEUH]YLMDþQHSULWUGLOQHHQRWH
]DHOHNWULþQHEDNUHQHYRGQLNHGHO 6SORãQHLQSRVHEQH]DKWHYH]DYRGQLNHRG
PPGRYNOMXþQRPP ,(& VSUHPHQMHQ
Connecting devices - Safety requirements for screw-type and screwless-type clamping
units for electrical copper conductors - Part 1: General requirements and particular
requirements for conductors from 0, 5 mm<(hoch)2> up to 35 mm<(hoch)2> (included)
(IEC 60999-1:1990, modified)
Verbindungsmaterial - Sicherheitsanforderungen für Schraubklemmstellen und
schraublose Klemmstellen für elektrische Kupferleite
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...