EN 60745-2-4:2003/A1:2009

SLOVENSKI STANDARD
01-september-2009
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DSHVNDOQLNHLQ
EUXVLOQLNHNLQLVRNROXWQL,(&$
Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for
sanders and polishers other than disk type
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-4: Besondere
Anforderungen für Schleifer und Polierer außer Tellerschleifern
Outils électroportatifs à moteur - Sécurité -- Partie 2-4: Règles particulières pour les
ponceuses et lustreuses, autres que du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-4:2003/A1:2009
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-4/A1
NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM
ICS 25.140.20; 25.140.30; 25.080.50
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-4: Particular requirements
for sanders and polishers other than disk type
(IEC 60745-2-4:2002/A1:2008)
Outils électroportatifs à moteur - Handgeführte motorbetriebene

Sécurité - Elektrowerkzeuge -
Partie 2-4: Règles particulières Sicherheit -
pour les ponceuses et les lustreuses Teil 2-4: Besondere Anforderungen
autres que du type à disque für Schleifer und Polierer außer
(CEI 60745-2-4:2002/A1:2008) Tellerschleifern
(IEC 60745-2-4:2002/A1:2008)
This amendment A1 modifies the European Standard EN 60745-2-4:2003; it was approved by CENELEC on
2009-04-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-4:2003/A1:2009 E

Foreword
The text of document 61F/733/FDIS future amendment 1 to IEC 60745-2-4:2002, prepared by SC 61F
(transformed into TC 116, Safety of hand-held motor-operated electric tools), was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60745-2-4:2003
on 2009-04-22.
With this amendment, this Part 2 is established on the basis of EN 60745-1:2006.
Main changes include editorial modifications to match with EN 60745-1:2006, addition of a new safety
warning to Clause 8: Marking and instructions, and clarifications in Annex K.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 1:2008 to the International Standard IEC 60745-2-4:2002 was approved by
CENELEC as an amendment to the European Standard without any modification.
In the Bibliography, replace the reference to EN 60745-2-3 by:
EN 60745-2-3:2007, Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements
for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, mod.).
__________
IEC 60745-2-4
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-4: Particular requirements for sanders and polishers other than disk type

Outils électroportatifs à moteur – Sécurité –
Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que
du type à disque
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 25.140.20; 24.140.30; 25.080.50 ISBN 2-8318-9803-X

-------------------
...