EN 60966-3-2:2003

SLOVENSKI SIST EN 60966-3-2:2004

STANDARD
april 2004
Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for
semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-
3-2:2003)
ICS 33.120.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60966-3-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 33.120.10 Supersedes EN 60966-3-2:1999

English version
Radio frequency and coaxial cable assemblies
Part 3-2: Detail specification for semi-flexible coaxial
cable assemblies for GSM use (0,8 GHz - 1 GHz)
(IEC 60966-3-2:2003)
Ensembles de cordons coaxiaux et de Konfektionierte Koaxial- und
cordons pour fréquences radioélectriques Hochfrequenzkabel
Partie 3-2: Spécification particulière pour Teil 3-2: Bauartspezifikation für
cordons coaxiaux semi-flexibles pour halbflexible konfektionierte Koaxialkabel
applications GSM (0,8 GHz - 1 GHz) für GSM-Anwendungen (0,8 GHz - 1 GHz)
(CEI 60966-3-2:2003) (IEC 60966-3-2:2003)

This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60966-3-2:2003 E
Foreword
The text of document 46A/550/FDIS, future edition 2 of IEC 60966-3-2, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60966-3-2 on 2003-10-01.

This European Standard supersedes EN 60966-3-2:1999.

The major change with respect to EN 60966-3-2:2003 is the reference to the 1999 edition of the
generic specification EN 60966-1.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01

This detail specification is to be read with EN 60966-1:1999, Radio frequency and coaxial cable
assemblies – Part 1: Generic specification - General requirements and test methods, with
EN 60966-3:2003, Radio frequency and coaxial cable assemblies – Part 3: Sectional specification for
semi-flexible coaxial cable assemblies and with EN 60966-3-1:2003, Radio frequency and coaxial
cable assemblies – Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies.

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60966-3-2:2003 was approved by CENELEC as a
European Standard without any modification.

In the official version, add the following note at the end:

NOTE  IEC 60169-4:1975 is harmonized as HD 134.4 S2:1977.
__________
NORME CEI
INTERNATIONALE IEC
60966-3-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-08
Ensembles de cordons coaxiaux et de
cordons pour fréquences radioélectriques –
Partie 3-2:
Spécification particulière
pour cordons coaxiaux semi-flexibles
pour applications GSM (0,8 GHz – 1 GHz)
Radio frequency and coaxial cable assemblies –
Part 3-2:
Detail specification for
semi-flexible coaxial cable assemblies
for GSM use (0,8 GHz – 1 GHz)
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
J
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60966-3-2 © IEC:2003 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 3-2: Detail specification for semi-flexible coaxial cable assemblies
for GSM use (0,8 GHz – 1 GHz)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to
technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization
(ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equip
...