iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50363-3:2005/A1:2011

(Amendment)

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard).
2021: CLC legacy converted by DCLab NISOSTS

Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen - Teil 3: PVC-Isoliermischungen

Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 3: Mélanges PVC pour enveloppe isolante

Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 3. del: Polivinilkloridne (PVC) mase za izoliranje - Dopolnilo A1

Ta del EN 50363 določa zahteve za fizikalne lastnosti polivinilkloridnih mas za izoliranje, ki so podane v preglednici 1. Ustrezne preskusne metode so navedene v seriji EN 60811 in EN 50395. OPOMBA: Ta del ISO 50363 se mora brati v povezavi z EN 50363-0.

General Information

Status
Published
Publication Date
17-Mar-2011
Withdrawal Date
13-Mar-2014
ICS
29.035.20 - Plastics and rubber insulating materials
Technical Committee
CLC/TC 20 - Electric cables
Drafting Committee
CLC/TC 20 - Electric cables
Current Stage
6060 - Document made available - Publishing
Start Date
18-Mar-2011
Completion Date
18-Mar-2011
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 50363-3:2006/A1:2011 - Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

Relations

Amends
EN 50363-3:2005 - Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds
Effective Date
28-Jan-2023

Buy Standard

EN 50363-3:2006/A1:2011EN 50363-3:2006/A1:2011
PreviousNext
Amendment
EN 50363-3:2006/A1:2011
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2011
0DWHULDOL]DL]ROLUDQMHRSODãþHQMHLQSUHYOHNHQL]NRQDSHWRVWQLKHQHUJHWVNLKNDEORY
GHO3ROLYLQLONORULGQH 39& PDVH]DL]ROLUDQMH'RSROQLOR$
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC
insulating compounds
Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -
Teil 3: PVC-Isoliermischungen
Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie
basse tension - Partie 3: Mélanges PVC pour enveloppe isolante
Ta slovenski standard je istoveten z: EN 50363-3:2005/A1:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50363-3/A1
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.035.20
English version
Insulating, sheathing and covering materials for low voltage energy
cables -
Part 3: PVC insulating compounds

Matériaux pour enveloppe isolante, Isolier-, Mantel- und
gainage et revêtement pour les câbles Umhüllungswerkstoffe für
d'énergie basse tension - Niederspannungskabel und -leitungen -
Partie 3: Mélanges PVC pour enveloppe Teil 3: PVC-Isoliermischungen
isolante
This amendment A1 modifies the European Standard EN 50363-3:2005; it was approved by CENELEC on
2011-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50214:2024(Main)
Flat flexible cables
SIST EN 50214:2024

This document covers the construction, requirements and particular test methods for flat, flexible PVC or halogen-free insulated and sheathed cables, of rated voltage Uo/U 300/500 V and above 1 mm2, Uo/U 450/750 V for use in passenger and goods lifts (elevators), and Uo/U 450/750 V for general purposes and for special applications such as hoists and travelling cranes. NOTE 1 This revision is in accordance with an agreement with CEN TC 10 to specify in the same standard a) flexible cables for lifts as required by EN 81-series, and b) flexible cable for applications such as hoists and travelling cranes, previously found in HD 359. In accordance with this agreement, only those cables in Clauses 5 and 6 are suitable for use with EN 81-series. NOTE 2 The limits for the overall diameter of the cables have been calculated in accordance with EN 60719.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50655-1:2023(Main)
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
SIST EN 50655-1:2023

This document specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and/or mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV. Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it can be carried out in combination with the accessory type tests. NOTE Information on health and safety is given in Annex A.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50655-3:2017(Main)
Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
SIST EN 50655-3:2018

This European Standard specifies the test methods and requirements for fingerprinting (as defined in 3.11) of cold shrinkable components intended to be used in cable accessories for low and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2. Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as a stand-alone test, but it may be carried out in combination with the accessory type tests. Component basic functions can be conductive, stress control or stress grading, insulating, oil barrier, anti-tracking, external protection and sealing. Components are supplied as single layer items or as multi-layer items. Components are generally supplied pre-expanded or with a system allowing expansion prior to installation. NOTE Information on health and safety is given in Annex A.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50655-1:2017(Main)
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
SIST EN 50655-1:2018

This European Standard specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and/or mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV. Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it may be carried out in combination with the accessory type tests. NOTE Information on health and safety is given in Annex A.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50655-2:2017(Main)
Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
SIST EN 50655-2:2018

This European Standard specifies the methods and requirements for fingerprinting (as defined in 3.13) of heat shrinkable components intended to be used for electrical insulation and/or electrical insulation and mechanical protection in cable accessories for low and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2. Fingerprinting of materials does not have a mandatory link to type testing of accessories. It is regarded as a stand-alone test, but it may be carried out in combination with accessory type tests.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    11 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50200:2015(Main)
Method of test for resistance to fire of unprotected small cables for use in emergency circuits
SIST EN 50200:2016

This European Standard specifies the test method for cables designed to have intrinsic resistance to fire and intended for use as emergency circuits for alarm, lighting and communication purposes. This European Standard is applicable to cables for emergency circuits of rated voltage not exceeding 600 V/1 000 V, including those of rated voltage below 80 V and optical fibre cables. This European Standard includes details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to electric power and control cables with rated voltage up to and including 600 V/1 000 V. Details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to copper data and telecom cables and optical cables are given in the relevant standards of CLC/TC 46X and CLC/TC 86A. The test method is limited to cables with an overall diameter not exceeding 20 mm. The test method is based on the direct impingement of flame from a propane burner giving a constant temperature attack of a notional 842 °C. It is intended to be used for cables for emergency circuits suitable for alarm, emergency lighting and communication. NOTE When the test method is used in support of EN 13501-3, it only applies to cables of less than 20 mm diameter, and, for metallic conductor cables, to those with conductor sizes up to and including 2,5 mm². For optical cables, only the less than 20 mm diameter limit applies. This European Standard includes (Annex B) the field of direct application and rules for extended application of test results (EXAP). Details regarding classification using data from this test are given in EN 13501-3 . Information regarding classification is given in Annex D. This European Standard also includes informative guidance (Annex E) on a means of applying a water spray to the cable during the test. Such a requirement may be a feature of particular product standards.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50525-2-11:2011(Main)
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
SIST EN 50525-2-11:2011

EN 50525-2-11 applies to thermoplastic (PVC) insulated and PVC sheathed flexible cables. The cables are of rated voltages U0/U up to and including 300/500 V. The cables are intended for the connection of domestic appliances to the fixed supply. Circular cables and flat cables are included. The maximum conductor operating temperatures for the cables in this standard are 70 °C (VV types) and 90 °C (V2V2 types). NOTE HD 516 contains extensive guidance on the safe use of cables in this standard. This EN 50525-2-11 should be read in conjunction with EN 50525-1, which specifies general requirements.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50363-8:2005/A1:2011(Amendment)
Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds
SIST EN 50363-8:2006/A1:2011

2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard).
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50363-6:2005/A1:2011(Amendment)
Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds
SIST EN 50363-6:2006/A1:2011

2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard).
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50363-5:2005/A1:2011(Amendment)
Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds
SIST EN 50363-5:2006/A1:2011

2019-04-04: BT D162/C050 removes link to 2014/35/EU (standard kept as supporting standard).
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day