iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50363-3:2006/A1:2011

(Amendment)

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

This part of EN 50363 specifies the requirements for the physical properties of the PVC insulating compounds given in Table 1. The relevant test methods are given in EN 60811 series and EN 50395. NOTE This part of EN 50363 is to be read in conjunction with EN 50363-0.
Table 1 – Types of PVC insulating compound

Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen - Teil 3: PVC-Isoliermischungen

Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension - Partie 3: Mélanges PVC pour enveloppe isolante

Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov - 3. del: Polivinilkloridne (PVC) mase za izoliranje - Dopolnilo A1

Ta del EN 50363 določa zahteve za fizikalne lastnosti polivinilkloridnih mas za izoliranje, ki so podane v preglednici 1. Ustrezne preskusne metode so navedene v seriji EN 60811 in EN 50395. OPOMBA: Ta del ISO 50363 se mora brati v povezavi z EN 50363-0.

General Information

Status
Published
Publication Date
07-Apr-2011
ICS
29.035.20 - Plastics and rubber insulating materials
29.060.20 - Cables
Technical Committee
IEKA - Electric cables
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Mar-2011
Due Date
27-May-2011
Completion Date
08-Apr-2011
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Ref Project
EN 50363-3:2005/A1:2011 - Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds

Relations

Amends
SIST EN 50363-3:2006 - Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
Effective Date
28-Jan-2023
Amends
SIST EN 50363-3:2006 - Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds
Effective Date
01-May-2011

Buy Standard

EN 50363-3:2006/A1:2011EN 50363-3:2006/A1:2011
PreviousNext
Amendment
EN 50363-3:2006/A1:2011
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50363-3:2006/A1:2011
01-maj-2011
0DWHULDOL]DL]ROLUDQMHRSODãþHQMHLQSUHYOHNHQL]NRQDSHWRVWQLKHQHUJHWVNLKNDEORY
GHO3ROLYLQLONORULGQH 39& PDVH]DL]ROLUDQMH'RSROQLOR$
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC
insulating compounds
Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -
Teil 3: PVC-Isoliermischungen
Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie
basse tension - Partie 3: Mélanges PVC pour enveloppe isolante
Ta slovenski standard je istoveten z: EN 50363-3:2005/A1:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
SIST EN 50363-3:2006/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50363-3:2006/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 50363-3:2006/A1:2011

EUROPEAN STANDARD
EN 50363-3/A1

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 29.035.20


English version


Insulating, sheathing and covering materials for low voltage energy
cables -
Part 3: PVC insulating compounds



Matériaux pour enveloppe isolante, Isolier-, Mantel- und
gainage et revêtement pour les câbles Umhüllungswerkstoffe für
d'énergie basse tension - Niederspannungskabel und -leitungen -
Partie 3: Mélanges PVC pour enveloppe Teil 3: PVC-Isoliermischungen
isolante





This amendment A1 modifies the European Standard EN 50363-3:2005; it was approved by CENELEC on
2011-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60811-511:2012/A1:2018(Amendment)
Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds (IEC 60811-511:2012/A1:2017)
EN 60811-511:2012/A1:2017
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-410:2012/A1:2018(Amendment)
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors (IEC 60811-410:2012/A1:2017)
EN 60811-410:2012/A1:2017
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50655-1:2018(Main)
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
EN 50655-1:2017

This European Standard specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV.
Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it may be carried out in combination with the accessory type tests.
NOTE    Information on health and safety is given in Annex A.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50655-3:2018(Main)
Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
EN 50655-3:2017

This European Standard specifies the test methods and requirements for fingerprinting (as defined in 3.11) of cold shrinkable components intended to be used in cable accessories for low and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2.
Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as a stand-alone test, but it may be carried out in combination with the accessory type tests.
Component basic functions can be conductive, stress control or stress grading, insulating, oil barrier, anti-tracking, external protection and sealing. Components are supplied as single layer items or as multi-layer items.
Components are generally supplied pre-expanded or with a system allowing expansion prior to installation.
NOTE   Information on health and safety is given in Annex A.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50655-2:2018(Main)
Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
EN 50655-2:2017

This European Standard specifies the methods and requirements for fingerprinting (as defined in 3.13) of heat shrinkable components intended to be used for electrical insulation or electrical insulation and mechanical protection in cable accessories for low and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2.
Fingerprinting of materials does not have a mandatory link to type testing of accessories. It is regarded as a stand-alone test, but it may be carried out in combination with accessory type tests.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-607:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
EN 60811-607:2012

This Part 607 of IEC 60811 specifies test methods for carbon black dispersion that are applicable specifically to PE and PP compounds, including cellular compounds and foam skin for insulation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-513:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
EN 60811-513:2012

This Part 513 of IEC 60811 gives procedures for a wrapping test after conditioning at elevated temperature. This test method applies specifically to polyethylene and polypropylene insulation. This test is intended for samples from filled cables of polyolefin insulation having a wall thickness of less than or equal to 0,8 mm.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-511:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
EN 60811-511:2012

This Part 511 of IEC 60811 describes the procedure for the measurement of the melt flow index for polyethylene compounds.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-510:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
EN 60811-510:2012

This Part 510 of IEC 60811 specifies the test method for a wrapping test after thermal ageing in air. This test method applies specifically to polyolefin insulation in communication cables. This test is intended for polyolefin insulations of unfilled cables and of dry cores for filled cables, where the insulation has a wall thickness of less than or equal to 0,8 mm.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60811-512:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Tensile strength and elongation at break after conditioning at elevated temperature - Methods specific to polyethylene and polypropylene compounds
EN 60811-512:2012

This Part 512 of IEC 60811 describes the procedure for testing tensile strength and elongation at break after conditioning at elevated temperature. It is specific to polyethylene and polypropylene compounds. This test is intended for samples from filled cables, of polyolefin insulations with a wall thickness of more than 0,8 mm and for polyolefin sheaths in direct contact with filling compound.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day