iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61000-4-5:1995

(Main)

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Relates to the immunity requirements, test methods, and range of recommended test levels for equipment to unidirectional surges caused by overvoltages from switching and lightning transients. Several test levels are defined which relate to different environment and installation conditions. These requirements are developed for and are applicable to electrical and electronic equipment. Establishes a common reference for evaluating the performance of equipment when subjected to high-energy disturbances on the power and inter-connection lines.

Elektromagnetische Verträglichkeit (EMV) - Teil 4-5: Prüf- und Meßverfahren - Prüfung der Störfestigkeit gegen Stoßspannungen

Compatibilité électromagnétique (CEM) - Partie 4-5: Techniques d'essai et de mesure - Essai d'immunité aux ondes de choc

Se rapporte aux prescriptions d'immunité pour les matériels, aux méthodes d'essai et à la gamme des niveaux d'essai recommandés, vis-à-vis des ondes de choc unidirectionnelles provoquées par des surtensions dues aux transitoires de foudre et de manoeuvre. Définit plusieurs niveaux d'essai se rapportant à différentes conditions d'environnement et d'installation. Ces prescriptions sont développées pour les matériels électrique et électronique et leurs sont applicables. Etablit une référence commune d'évaluation des performances des matériels lorsque leurs lignes d'alimentation et d'interconnexion sont soumises à des perturbations de grande énergie.

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test (IEC 1000-4-5:1995)

General Information

Status
Withdrawn
Publication Date
21-Mar-1995
ICS
29.020 - Electrical engineering in general
Technical Committee
CLC/TC 210 - Electromagnetic Compatibility (EMC)
Drafting Committee
IEC/SC 77B - IEC_SC_77B
Parallel Committee
IEC/SC 77B - IEC_SC_77B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2009
Completion Date
01-Oct-2009
Directive
2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
SIST EN 61000-4-5:1997 - Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques - Surge immunity test

Relations

Amended By
EN 61000-4-5:1995/A1:2001 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Effective Date
29-Jan-2023
Replaced By
EN 61000-4-5:2006 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Effective Date
29-Jan-2023

Buy Standard

EN 61000-4-5:1997EN 61000-4-5:1997
PreviousNext
Standard
EN 61000-4-5:1997
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61000-4-5:1997
01-marec-1997
1DGRPHãþD
SIST ENV 50142:1997
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 5: Surge immunity test (IEC 1000-4-5:1995)
Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques -
Surge immunity test
Elektromagnetische Verträglichkeit (EMV) -- Teil 4-5: Prüf- und Meßverfahren - Prüfung
der Störfestigkeit gegen Stoßspannungen
Compatibilité électromagnétique (CEM) -- Partie 4-5: Techniques d'essai et de mesure -
Essai d'immunité aux ondes de choc
Ta slovenski standard je istoveten z: EN 61000-4-5:1995
ICS:
33.100.20 Imunost Immunity
SIST EN 61000-4-5:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 2 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 3 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 4 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 5 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 6 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 7 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 8 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 9 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 10 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 11 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 12 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 13 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 14 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 15 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 16 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 17 ----------------------

SIST EN 61000-4-5:1997

---------------------- Page: 18 ----------------------

SIST EN 61000-4-5:1997

--------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50147-1:1996(Main)
Anechoic chambers - Part 1: Shield attenuation measurement
SIST EN 50147-1:1997

This standard applies to measurements of shielding attenuation of shielded enclosures (chambers, rooms) in the frequency range 9 kHz - 40 GHz. The object of this standard is to establish a common measurement procedure for validating the shielding effectiveness of a shielded enclosure.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61543:2023(Main)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
SIST EN IEC 61543:2023

This document provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V. Household and similar use corresponds to the description given in the generic standard IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments. This document is intended to be referred to by RCD product standards and is not intended to be used as a standalone document. Residual current-operated protective devices are: - Residual current operated circuit-breakers without integral overcurrent protection for household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423; - Residual current operated circuit-breakers with integral overcurrent protection for household and similar use (RCBOs) covered by IEC 61009 series and IEC 62423; - Residual current devices with or without overcurrent protection for socket-outlets (SRCDs) covered by IEC 62640; - Portable residual current devices without integral overcurrent protection (PRCDs) covered by IEC 61540; - Devices with an RCD functionality for household and similar use according product standards following the group safety publications for general safety requirements for RCDs, IEC 60755. This edition applies if it is referred to as a dated reference in the relevant product standard. This document is also intended to be used as a guideline in the preparation of EMC requirements and tests for other product standards under the scope of SC 23E. It also specifies generic performance criteria intended to be transformed into specific performance criteria by the relevant product standard. Note: Examples of other product standards under the scope of SC 23E are: - IEC 62020-1 "Electrical accessories - Residual current monitors (RCMs) – Part 1: RCMs for household and similar uses"; - IEC 62606 "General requirements for arc fault detection devices"; - IEC 63024 "Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses"; - IEC 63052 "Power frequency overvoltage protective devices (POPs) for household and similar applications"; - IEC 62752 "In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)"; - IEC 62955 "Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles".

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62561-6:2023(Main)
Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSCs)
SIST EN IEC 62561-6:2023

This part of IEC 62561 specifies the requirements and tests for devices intended to count the number of lightning strikes based on the current flowing in a conductor. This conductor may be part of a lightning protection system (LPS) or connected to an SPD installation or other conductors, which are not intended to conduct a significant portion of lightning currents. LSCs for use in hazardous atmospheres, extra requirements for the components may be necessary to be taken. NOTE In CENELEC countries, testing requirements of components for explosive atmosphere are specified in CLC/TS 50703-2.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62561-1:2023(Main)
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
SIST EN IEC 62561-1:2023

IEC 62561-1:2023 is available as IEC 62561-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62561-1:2023 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) definitions of connection types mentioned in the scope have been added; b) location classification has been expanded in detail; c) the document has been updated in line with the new edition of ISO 22479:2019 on humid sulphurous atmosphere treatment; d) a new normative Annex E for reduced test procedures has been introduced.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61547:2023(Main)
Equipment for general lighting purposes - EMC immunity requirements
SIST EN IEC 61547:2023

IEC 61547:2020 is available as IEC 61547:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61547:2020 which deals with electromagnetic immunity requirements, applies to lighting equipment which is within the scope of IEC technical committee 34, including apparatus such as lamps, luminaires, and modules. This third edition cancels and replaces the second edition, published in 2009. This edition constitutes a technical revision This edition includes the following significant technical changes with respect to the previous edition: - extension of scope with end-user replaceable modules and the combination of end-user replaceable module and independent auxiliary; - clarification of module testing in a host system; - increased ESD and surge test levels for road and street lighting equipment; - the introduction of ESD testing under normal operation and handling conditions; - removal of line to ground surge test for self-ballasted lamps ≤ 25 W.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60216-5:2022(Main)
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material
SIST EN IEC 60216-5:2023

IEC 60216-5:2022 specifies the experimental and calculation procedures to be used for deriving the relative temperature index of a material from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2. The calculation procedures are supplementary to those of IEC 60216-3. Guidance is also given for assessment of thermal ageing after a single fixed time and temperature, without extrapolation. This edition includes the following significant technical changes with respect to the previous edition:  Annex C “Computer program” has been completely reworked; in 3.1, the terms “ATE” and “RTE” were replaced by “ATI” and “RTI” to emphasize their reference to an electrical insulating material (EIM).  This standard is to be read in conjunction with IEC 60216-1:2013, IEC 60216-2:2005 and IEC 60216-3:2021.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50160:2022(Main)
Voltage characteristics of electricity supplied by public electricity networks
SIST EN 50160:2023

1.1 Application This document specifies the main characteristics of the voltage at a network user's supply terminals in public low voltage, medium, high, and extra-high voltage AC electricity networks under normal operating conditions. This document specifies the limits or values within which the voltage characteristics can be expected to remain at any supply terminal in public European electricity networks, only. Industrial networks are excluded from the scope of EN 50160. NOTE 1 If non-public networks (e.g. residential quarters, energy communities, office centres, shopping centres) have similar end-users as public networks, it is strongly advised to apply the same requirements as for public networks. This document does not apply under abnormal operating conditions, including the following: a) a temporary supply arrangement to keep network users supplied during conditions arising as a result of a fault, maintenance and construction work, or to minimize the extent and duration of a loss of supply; b) in the case of non-compliance of a network user's installation or equipment with the relevant standards or with the technical requirements for connection, established either by the public authorities or the network operator, including the limits for the emission of conducted disturbances; NOTE 2 A network user’s installation can include load and generation. c) in exceptional situations, in particular: 1) exceptional weather conditions and other natural disasters; 2) third party interference; 3) acts by public authorities, 4) industrial actions (subject to legal requirements); 5) force majeure; 6) power shortages resulting from external events. The voltage characteristics given in this document refer to conducted disturbances in public electric power networks. They are not intended to be used as electromagnetic compatibility (EMC) levels or product emission limits. Power quality is related to EMC in several ways – especially because compliance with power quality requirements depends on the control of cumulative effect of electromagnetic emissions from all/multiple equipment and/or installations. Therefore, the voltage characteristics given in this document gives guidance for specifying requirements in equipment product standards and in installation standards. NOTE 3 The performance of equipment might be impaired if it is subjected to supply conditions which are not specified in the equipment product standard. NOTE 4 This document can be superseded in total or in part by the terms of a contract between the individual network user and the network operator. The sharing of complaint management and problem mitigation costs between the involved parties is outside the scope of EN 50160. Measurement methods to be applied in this document are described in EN 61000-4-30. [...]

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-5-54:2011/A1:2022(Amendment)
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
SIST HD 60364-5-54:2011/A1:2023

IEC 60364-5-54:2011 addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety of the electrical installation. This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: - clarification of the definition of protective conductor; - improved specification of mechanical characteristics of the earth electrode; - introduction of earth electrode for protection against electric shock and lighting protection; - annexes describing concrete-embedded foundation earth electrodes and soil-embedded earth electrode. IEC 60364-5-54:2011 has the status of a basic safety publication in accordance with IEC Guide 104. This document also includes requirements regarding earthing and equipotential bonding for information and communication technology (ICT) with the aim of: - reducing the risk of electrical hazards for correct operation of these devices and the information and communication technology wiring; - providing the telecommunication systems with a reliable signal reference plane that can improve resistance to electromagnetic interference (EMI) by reference to ISO/IEC 30129. NOTE Examples of information and communication technology (ICT) include: - DC supply networks (and systems) for supplying power to ICT equipment within a building; - star-shaped private automatic branch exchanges (PABX) or their equipment; - local area (communication) networks (LANs); - fire and intruder alarms communication systems; - building automation systems, e.g. direct digital control systems; - systems for computer-aided manufacturing (CAM) and other computer-aided services; - broadcast and communication technology.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61340-2-1:2015/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge
SIST EN 61340-2-1:2016/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products. It includes a generic description of test methods and detailed test procedures for specific applications. The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces. In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62493:2015/A1:2022(Amendment)
Assessment of lighting equipment related to human exposure to electromagnetic fields
SIST EN 62493:2015/A1:2022

CLC/TC 34 took decision to unlink project from LVD

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day