EN IEC 62435-8:2020

SLOVENSKI STANDARD
01-november-2020
Elektronske komponente - Dolgoročno skladiščenje elektronskih polprevodniških
elementov - 8. del: Pasivne elektronske naprave (IEC 62435-8:2020)
Electronic components - Long-term storage of electronic semiconductor devices - Part 8:
Passive elecronic devices (IEC 62435-8:2020)
Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauelemente - Teil 8:
Passive elektronische Bauelemente (IEC 62435-8:2020)
Composants électroniques - Stockage de longue durée des dispositifs électroniques à
semiconducteurs - Partie 8 : Dispositifs électroniques passifs (IEC 62435-8:2020)
Ta slovenski standard je istoveten z: EN IEC 62435-8:2020
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62435-8

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 31.020
English Version
Electronic components - Long-term storage of electronic
semiconductor devices - Part 8: Passive electronic devices
(IEC 62435-8:2020)
Composants électroniques - Stockage de longue durée des Elektronische Bauteile - Langzeitlagerung elektronischer
dispositifs électroniques à semiconducteurs - Partie 8 : Halbleiterbauelemente - Teil 8: Passive elektronische
Dispositifs électroniques passifs Bauelemente
(IEC 62435-8:2020) (IEC 62435-8:2020)
This European Standard was approved by CENELEC on 2020-08-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62435-8:2020 E

European foreword
The text of document 47/2595/CDV, future edition 1 of IEC 62435-8, prepared by IEC/TC 47
"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62435-8:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62435-8:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC/TR 62258-3 NOTE Harmonized as CLC/TR 62258-3
IEC 62435-1 NOTE Harmonized as EN 62435-1
IEC 62435-2 NOTE Harmonized as EN 62435-2
IEC 62435-3 NOTE Harmonized as EN IEC 62435-3
IEC 62435-4 NOTE Harmonized as EN IEC 62435-4
IEC 62435-5 NOTE Harmonized as EN 62435-5
IEC 62435-6 NOTE Harmonized as EN IEC 62435-6
1 2
IEC 62435-7 NOTE Harmonized as EN IEC 62435-7

Under preparation. Stage at the time of publication: IEC AFDIS 62435-7:2020.
Under preparation. Stage at the time of publication: prEN IEC 62435-7:2019.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60749-20 - Semiconductor devices - Mechanical and EN 60749-20 -
climatic test methods - Part 20: Resistance of
plastic encapsulated SMDs to the combined
effect of moisture and soldering heat
IEC 60749-20-1 - Semiconductor devices - Mechanical and - -
climatic test methods - Part 20-1: Handling,
packing, labelling and shipping of surface-
mount devices sensitive to the combined
effect of moisture and soldering heat
IEC 61760-4 - Surface mounting technology - Part 4: EN 61760-4 -
Classification, packaging, labelling and
handling of moisture sensitive devices
JEDEC J-STD-075 - Classification of non-IC electronic components - -
for assembly processes
IEC 62435-8 ®
Edition 1.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electronic components – Long-term storage of electronic semiconductor

devices –
Part 8: Passive electronic devices

Composants électroniques – Stockage de longue durée des dispositifs

électroniques à semiconducteurs –

Partie 8: Dispositifs électroniques passifs

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020 ISBN 978-2-8322-8560-2

– 2 – IEC 62435-8:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Storage considerations . 9
4.1 Overview of passive components . 9
4.2 Failure mechanisms . 9
4.2.1 Occurrence of failure and driving force . 9
4.2.2 Storage environment and mitigation for stimuli to prevent failure . 11
4.3 Materials management . 11
4.4 Storage media . 12
4.5 Documentation/paper lot identifiers . 12
4.6 Inventory check. 12
4.7 Inventory dry packing refreshing . 12
4.8 Inventory re-assessment . 13
5 Baseline long-term storage requirements . 13
5.1 General . 13
5.2 Moisture sensitivity designation . 13
5.3 Dry packing for storage . 13
5.4 Non-moisture sensitive storage . 13
5.4.1 General . 13
5.4.2 Storage media . 13
5.4.3 Lot data and labelling . 13
5.5 Storage of moisture sensitive finished devices . 14
5.5.1 Moisture barrier bag . 14
5.5.2 Dunnage . 14
5.5.3 Humidity indicator card . 14
5.5.4 Desiccant . 14
5.5.5 Labelling . 14
5.5.6 Lot data and labelling . 15
5.5.7 Storage environment . 15
5.5.8 Process (temperature) sensitivity designation . 15
Annex A (informative) Passive electronic device storage environment considerations . 16
Bibliography . 17

Table 1 – Failure mechanisms in storage and stimuli to mitigate during storage. . 10
Table 2 – Long-term environment – sustained condition requirements . 11
Table 3 – Considerations for management, control and documentation during storage . 12
Table A.1 – Long-term storage environment – sustained condition considerations . 16

IEC 62435-8:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC COMPONENTS – LONG-TERM STORAGE
OF ELECTRONIC SEMICONDUCTOR DEVICES –

Part 8: Passive electronic devices

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote interna-
tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this
end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Tech-
nical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publica-
tion(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the
subject dealt with may participate in this preparatory work. International, governmental and non-governmental
organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Interna-
tional Organization for Standardization (ISO) in accordance with conditions determined by agreement between
the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all inter-
ested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinter-
pretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence be-
tween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) Al
...