EN 60695-2-12:2010/A1:2014

SLOVENSKI STANDARD
01-marec-2015
Preskušanje požarne ogroženosti - 2-12. del: Preskusne metode z žarilno žico -
Preskusna metoda za materiale: indeks vnetljivosti z žarilno žico (GWFI) (IEC
60695-2-12:2010/A1:2014)
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire
flammability index (GWFI) test method for materials (IEC 60695-2-12:2010/A1:2014)
Prüfungen zur Beurteilung der Brandgefahr - Teil 2-12: Prüfverfahren mit dem Glühdraht
- Prüfung mit dem Glühdraht zur Entflammbarkeit (GWFI) von Werkstoffen
Essais relatifs aux risques du feu - Partie 2-12: Essais au fil incandescent/chauffant -
Méthode d'essai d'indice d'inflammabilité au fil incandescent (GWFI) pour matériaux
Ta slovenski standard je istoveten z: EN 60695-2-12:2010/A1:2014
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60695-2-12:2010/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 13.220.40; 29.020
English Version
Fire hazard testing - Part 2-12: Glowing/hot-wire based test
methods - Glow-wire flammability index (GWFI) test method for
materials
(IEC 60695-2-12:2010/A1:2014)
Essais relatifs aux risques du feu - Partie 2-12: Essais au fil Prüfungen zur Beurteilung der Brandgefahr - Teil 2-12:
incandescent/chauffant - Méthode d'essai d'indice Prüfverfahren mit dem Glühdraht - Prüfung mit dem
d'inflammabilité au fil incandescent (GWFI) pour matériaux Glühdraht zur Entflammbarkeit (GWFI) von Werkstoffen
(CEI 60695-2-12:2010/A1:2014) (IEC 60695-2-12:2010/A1:2014)
This amendment A1 modifies the European Standard EN 60695-2-12:2010; it was approved by CENELEC on 2014-03-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60695-2-12:2010/A1:2014 E

EN 60695-2-12:2010 /A1:2014 - 2 -
Foreword
The text of document 89/1198/FDIS, future IEC 60695-2-12:2010/A1, prepared by IEC TC 89, Fire hazard
testing, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60695-
2-12:2010/A1:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented (dop) DAV + 6 months
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2017-03-19
with the EN have to be withdrawn

Endorsement notice
The text of the International Standard IEC 60695-2-12:2010/A1:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60695-2-11 NOTE  Harmonized as EN 60695-2-11.
ISO/IEC 13943:2008 NOTE  Harmonized as EN ISO 13943:2010.

- 3 - EN 60695-2-12:2010/A1:2014

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Publication Year Title EN/HD Year
In Annex ZA of EN 60695-2-12:2010, remove the dates from the following existing references:
IEC Guide 104 -  The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO 293 -  Plastics - Compression moulding of test EN ISO 293 -
specimens of thermoplastic materials
ISO 295 -  Plastics_- Compression moulding of test EN ISO 295 -
specimens of thermosetting materials
ISO/IEC Guide 51 -  Safety aspects - Guidelines for their - -
inclusion in standards
In Annex ZA of EN 60695-2-12:2010, remove the following references:
IEC 60695-2-11 2000 Fire hazard testing - EN 60695-2-11 2001
Part 2-11: Glowing/hot-wire based test
methods - Glow-wire flammability test
method for end-products
ISO 13943 2008 Fire safety - Vocabulary EN ISO 13943 2010

IEC 60695-2-12 ®
Edition 2.0 2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BA SIC SAFETY PUBLICATION
PU BLICATION FONDAMENTALE DE
...