EN 60691:2016/A1:2019

SLOVENSKI STANDARD
01-julij-2019
Termični taljivi vložki - Zahteve in navodilo za uporabo (IEC 60691:2015/A1:2019)
Thermal-links - Requirements and application guide (IEC 60691:2015/A1:2019)
Temperatursicherungen - Anforderungen und Anwendungshinweise (IEC
60691:2015/A1:2019)
Protecteurs thermiques - Exigences et guide d'application (IEC 60691:2015/A1:2019)
Ta slovenski standard je istoveten z: EN 60691:2016/A1:2019
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
medtokovna zaščita protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60691:2016/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2019
ICS 29.120.50
English Version
Thermal-links - Requirements and application guide
(IEC 60691:2015/A1:2019)
Protecteurs thermiques - Exigences et guide d'application Temperatursicherungen - Anforderungen und
(IEC 60691:2015/A1:2019) Anwendungshinweise
(IEC 60691:2015/A1:2019)
This amendment A1 modifies the European Standard EN 60691:2016; it was approved by CENELEC on 2019-02-15. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60691:2016/A1:2019 E

European foreword
The text of document 32C/548/FDIS, future IEC 60691/A1, prepared by SC 32C "Miniature fuses" of
IEC/TC 32 "Fuses" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-11-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-02-15
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For the relationship with EU Directive(s), see informative Annex ZZ, included in this document.
Endorsement notice
The text of the International Standard IEC 60691:2015/A1:2019 was approved by CENELEC as a
European Standard without any modification.
Replace Annex ZA of EN 60691:2016 by the following one:
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60065 (mod) 2014 Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
- -  + A11 2017
IEC 60112 2003 Method for the determination of the proof EN 60112 2003
and the comparative tracking indices of
solid insulating materials
+ A1 2009  + A1 2009
IEC 60127-2 2014 Miniature fuses - Part 2: Cartridge fuse- EN 60127-2 2014
links
IEC 60216-5 2008 Electrical insulating materials - Thermal EN 60216-5 2008
endurance properties - Part 5:
Determination of relative thermal
endurance index (RTE) of an insulating
material
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems - Part 1:
Principles, requirements and tests
IEC 60695-2-12 2010 Fire hazard testing - Part 2-12: EN 60695-2-12 2010
Glowing/hot-wire based test methods -
Glow-wire flammability index (GWFI) test
method for materials
+ A1 2014  + A1 2014
IEC 60695-2-13 2010 Fire hazard testing - Part 2-13: EN 60695-2-13 2010
Glowing/hot-wire based test methods -
Glow-wire ignition temperature (GWIT) test
method for materials
+ A1 2014  + A1 2014
IEC 60695-10-2 2014 Fire hazard testing - Part 10-2: Abnormal EN 60695-10-2 2014
heat - Ball pressure test method
IEC 60695-11-10 2013 Fire hazard testing - Part 11-10: Test EN 60695-11-10 2013
flames - 50 W horizontal and vertical flame
test methods
IEC 60730-1 (mod) 2013 Automatic electrical controls - Part 1: EN 60730-1 2016
General requirements
IEC 61210 (mod) 2010 Connecting devices - Flat quick-connect EN 61210 2010
terminations for electrical copper
conductors - Safety requirements

Annex ZZ
(informative)
Relationship between this European standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits
...