Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

This standard defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low voltage power supply networks for voltages dips, short interruptions, and voltage variations. It applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase. It does not apply to electrical and electronic equipment for connection to d.c. networks or 400 Hz a.c. networks.

Elektromagnetische Verträglichkeit (EMV) - Teil 4-11: Prüf- und Meßverfahren - Prüfung der Störfestigkeit gegen Spannungseinbrüche, Kurzzeitunterbrechungen und Spannungsschwankungen

Compatibilité électromagnétique (CEM) - Partie 4-11: Techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension

Cette norme a pour but de définir les méthodes d'essai d'immunité et les gammes des niveaux d'essais conseillées pour les équipements électriques et électroniques connectés aux réseaux basse tension, en ce qui concerne les creux de tension et les coupures brèves et les variations de tension. Elle s'applique à des équipements électriques et électroniques dont le courant d'alimentation assigné ne dépasse pas 16 A par phase. Elle ne s'applique pas à des équipements électriques et électroniques raccordés à des réseaux de distribution à courant continu ou à courant alternatif à 400 Hz.

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests

General Information

Status
Withdrawn
Publication Date
02-Aug-1994
Drafting Committee
IEC/SC 77A - IEC_SC_77A
Parallel Committee
IEC/SC 77A - IEC_SC_77A
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jun-2007
Completion Date
01-Jun-2007

Relations

Effective Date
29-Jan-2023
Effective Date
09-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
09-Feb-2026
Effective Date
09-Feb-2026
Effective Date
09-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
03-Feb-2026

Frequently Asked Questions

EN 61000-4-11:1994 is a standard published by CLC. Its full title is "Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests". This standard covers: This standard defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low voltage power supply networks for voltages dips, short interruptions, and voltage variations. It applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase. It does not apply to electrical and electronic equipment for connection to d.c. networks or 400 Hz a.c. networks.

This standard defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low voltage power supply networks for voltages dips, short interruptions, and voltage variations. It applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase. It does not apply to electrical and electronic equipment for connection to d.c. networks or 400 Hz a.c. networks.

EN 61000-4-11:1994 has the following relationships with other standards: It is inter standard links to EN 61000-4-11:2004, EN 13589:2003, EN 61000-4-1:1994, ENV 61000-2-2:1993, EN 60068-1:1994, EN 1643:2000, EN 14154-3:2005+A2:2011, EN 1776:2025, EN 61851-21:2002, EN 60669-2-1:1996, EN 60947-8:2003, EN 61000-4-1:2000, EN 60730-1:2000, EN 61851-22:2002, EN 61000-4-25:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 61000-4-11:1994 is associated with the following European legislation: EU Directives/Regulations: 2004/108/EC, 2004/108/EU, 89/336/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 61000-4-11:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-1997
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 11: Voltage dips, short interruptions and voltage variations
immunity tests
Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques -
Voltage dips, short interruptions and voltage variations immunity tests
Elektromagnetische Verträglichkeit (EMV) -- Teil 4-11: Prüf- und Meßverfahren - Prüfung
der Störfestigkeit gegen Spannungseinbrüche, Kurzzeitunterbrechungen und
Spannungsschwankungen
Compatibilité électromagnétique (CEM) -- Partie 4-11: Techniques d'essai et de mesure -
Essais d'immunité aux creux de tension, coupures brèves et variations de tension
Ta slovenski standard je istoveten z: EN 61000-4-11:1994
ICS:
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...