EN IEC 62311:2020

SLOVENSKI STANDARD
01-maj-2020
Nadomešča:
SIST EN 62311:2008
Ocena elektronske in električne opreme glede omejevanja izpostavljenosti ljudi
elektromagnetnim sevanjem (0 Hz - 300 GHz)
Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz - 300 GHz)
Bewertung von elektrischen und elektronischen Einrichtungen in Bezug auf
Begrenzungen der Exposition von Personen in elektromagnetischen Feldern (0 Hz - 300
GHz)
Evaluation des équipements électroniques et électriques en relation avec les restrictions
d'exposition humaine aux champs électromagnétiques (0 Hz - 300 GHz)
Ta slovenski standard je istoveten z: EN IEC 62311:2020
ICS:
13.280 Varstvo pred sevanjem Radiation protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62311

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 97.030 Supersedes EN 62311:2008 and all of its amendments
and corrigenda (if any)
English Version
Assessment of electronic and electrical equipment related to
human exposure restrictions for electromagnetic fields (0 Hz to
300 GHz)
(IEC 62311:2019)
Évaluation des équipements électroniques et électriques en Bewertung von elektrischen und elektronischen
relation avec les restrictions d'exposition humaine aux Einrichtungen in Bezug auf Begrenzungen der Exposition
champs électromagnétiques (0 Hz à 300 GHz) von Personen in elektromagnetischen Feldern (0 Hz - 300
(IEC 62311:2019) GHz)
(IEC 62311:2019)
This European Standard was approved by CENELEC on 2019-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62311:2020 E
European foreword
The text of document 106/480/FDIS, future edition 2 of IEC 62311, prepared by IEC/TC 106 "Methods
for the assessment of electric, magnetic and electromagnetic fields associated with human exposure"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-07-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-01-24
document have to be withdrawn
This document supersedes EN 62311:2008 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62311:2019 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
ISO/IEC 17025 NOTE Harmonized as EN ISO/IEC 17025
CISPR 32 NOTE Harmonized as EN 55032
IEC 61786-1:2013 NOTE Harmonized as EN 61786-1:2014 (not modified)
IEC 62110:2009 NOTE Harmonized as EN 62110:2009/AC:2015 (not modified)
IEC 62209-1:2016 NOTE Harmonized as EN 62209-1:2016 (not modified)
IEC 62209-2:2010 NOTE Harmonized as EN 62209-2:2010 (not modified)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-161 1990 International Electrotechnical Vocabulary. - -
Chapter 161: Electromagnetic compatibility
Determination of RF field strength, power
IEC 62232 2017  EN 62232 2017
density and SAR in the vicinity
ofradiocommunication base stations for the
purpose of evaluating human exposure

IEC 62311 ®
Edition 2.0 2019-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Assessment of electronic and electrical equipment related to human exposure

restrictions for electromagnetic fields (0 Hz to 300 GHz)

Évaluation des équipements électroniques et électriques en relation avec les

restrictions d'exposition humaine aux champs électromagnétiques (0 Hz à 300 GHz)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.030 ISBN 978-2-8322-6763-9

– 2 – IEC 62311:2019 © IEC 2019
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 10
4 Compliance criteria . 10
5 Performance of assessments . 11
5.1 Assessment methods . 11
5.2 Frequency range under assessment for unintentional radiation . 13
5.3 General procedure for the assessment of equipment . 13
6 Uncertainty . 17
6.1 General . 17
6.2 Consideration of uncertainty for compliance . 17
7 Considerations on sources with multiple frequencies and non-uniformity of fields . 19
7.1 Sources with multiple frequencies . 19
7.2 Exposure to non-uniform fields . 19
8 Evaluation of compliance to limits . 20
9 Assessment report . 20
9.1 General . 20
9.2 Items to be recorded in the assessment report . 20
9.2.1 Assessment method . 20
9.2.2 Presentation of the results . 20
9.2.3 Equipment using external antennas . 20
10 Product documentation . 20
Annex A (informative)  Examples for summation regimes . 21
A.1 ICNIRP 1998 summation regimes . 21
A.1.1 General . 21
A.1.2 Frequency range from 1 Hz to 10 MHz (ICNIRP 1998-based) . 21
A.1.3 Frequency range from 100 kHz to 300 GHz (ICNIRP 1998-based) . 25
A.2 ICNIRP 2010 summation regimes . 26
A.2.1 General . 26
A.2.2 Frequency domain assessment – ICNIRP 2010 Guidelines . 26
A.2.3 Time domain assessment – ICNIRP 2010 Guidelines . 29
A.3 IEEE summation regimes . 31
A.3.1 General . 31
A.3.2 Frequency range from 0 kHz to 5 MHz (IEEE-based) . 31
A.3.3 Frequency range from 3 kHz to 300 GHz (IEEE-based) . 32
Bibliography . 33

Figure 1 – Assessment flowchart . 15
Figure A.1 – Schematic of “weighting circuit” . 23

IEC 62311:2019 © IEC 2019 – 3 –
Figure A.2 – Dependency on frequency of the reference levels VL plotted with
 
dVL
smoothing edges with VL(f ) = VL , VL(f ) = V and the slopes . 24
1  
c0 0 c1
df
 
n
Figure A.3 – Transfer function WL . 24
Figure A.4 – Amplitude and phase response for the weighting function WL(f) of the
magnetic field (reference level for general public exposure) . 30

Table 1 – List of possible assessment methods . 11
Table 2 – Characteristics and parameters of the equipment to be considered . 16

– 4 – IEC 62311:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT
RELATED TO HUMAN EXPOSURE RESTRICTIONS
FOR ELECTROMAGNETIC FIELDS (0 Hz to 300 GHz)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for t
...