EN 61196-3-2:1997

SLOVENSKI STANDARD
01-april-1998
Radio frequency cables - Part 3-2: Coaxial cables for digital communication in
horizontal floor wiring - Detail specification for coaxial cables with solid dielectric
for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997)
Radio frequency cables -- Part 3-2: Coaxial cables for digital communication in horizontal
floor wiring - Detail specification for coaxial cables with solid dielectric for local area
networks of 185 m reach and up to 10 Mb/s
Hochfrequenzkabel -- Teil 3-2: Koaxialkabel für Etagenverkabelung in der digitalen
Kommunikation - Bauartspezifikation für Koaxialkabel mit Massiv-Dielektrikum für lokale
Netze mit 185 m Reichweite und bis 10 Mb/s
Câbles pour fréquences radioélectriques -- Partie 3-2: Câbles coaxiaux pour
transmission numérique destinés au câblage horizontal des immeubles - Spécification
particulière pour les câbles coaxiaux avec diélectrique solide pour réseaux locaux
jusqu'à 185 m, et de débit maximal de 10 Mb/s
Ta slovenski standard je istoveten z: EN 61196-3-2:1997
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.





NORME
CEI
INTERNATIONALE
IEC
61196-3-2
INTERNATIONAL
Première édition
STANDARD
First edition
1997-09
Câbles pour fréquences radioélectriques –
Partie 3-2:
Câbles coaxiaux pour transmission numérique
destinés au câblage horizontal des immeubles –
Spécification particulière pour les câbles coaxiaux
avec diélectrique solide pour réseaux locaux
jusqu'à 185 m, et de débit maximal de 10 Mb/s
Radio frequency cables –
Part 3-2:
Coaxial cables for digital communication
in horizontal floor wiring –
Detail specification for coaxial cables with solid
dielectric for local area networks of 185 m reach
and up to 10 Mb/s
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
E
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61196-3-2 © IEC:1997 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
RADIO FREQUENCY CABLES –
Part 3-2: Coaxial cables for digital communication
in horizontal floor wiring –
Detail specification for coaxial cables with solid dielectric
for local area networks of 185 m reach and up to 10 Mb/s
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61196-3-2 has been prepared by subcommittee 46A: Coaxial
cables, of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors and
accessories for communication and signalling.
The text of this standard is based on the following documents:
FDIS Report on voting
46A/289/FDIS 46A/303/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

– 4 – 61196-3-2 © CEI:1997
[1] Elaboré par / [2] Document No. : CEI/IEC 61196-3-2
Prepared by: Indice / Issue :
SC46A/WG3 Date : Mars / March 1997
[3] Disponible à / [4] Spécification générique /
Available from: Generi
...