Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

Deals with the safety of electrically operated commercial grillers and toasters not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals and commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-48: Besondere Anforderungen für elektrische Strahlungsgrillgeräte und Toaster für den gewerblichen Gebrauch

Appareils électrodomestiques et analogues - Sécurité - Partie 2-48: Règles particulières pour les grils et grille-pain électriques à usage collectif

En anglais seulement.

Gospodinjski in podobni električni aparati - Varnost - 2-48. del: Posebne zahteve za komercialne električne žare in opekače (IEC 60335-2-48:2002) (vsebuje popravek AC:2007)

Standard obravnava varnost električno upravljanih komercialnih električnih žarov in opekačev, ki niso namenjeni gospodinjski uporabi. Nazivna napetost mora biti manjša od 250 V za enofazne aparate, priključene med fazo in nevtralni vodnik, in 480 V za ostale aparate. Rotacijski ali neprekinjeno delujoči žari in opekači ter podobni aparati, namenjeni pečenju s toplotnim sevanjem, kot so ražnji, salamandri itd., spadajo v področje uporabe tega standarda. Aparati, ki spadajo v področje uporabe tega standarda, se običajno uporabljajo v restavracijah, menzah, bolnišnicah in komercialnih podjetjih, kot so pekarne, mesnice itd. Tudi električni del aparatov, ki uporabljajo druge vire energije, spada v področje uporabe tega standarda.

General Information

Status
Published
Publication Date
06-Mar-2003
Withdrawal Date
31-Jan-2006
Current Stage

Relations

Buy Standard

Standard
EN 60335-2-48:2003
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2003
1DGRPHãþD
SIST EN 60335-2-48:2001
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO3RVHEQH]DKWHYH
]DNRPHUFLDOQHHOHNWULþQHåDUHLQRSHNDþH ,(&  YVHEXMH
SRSUDYHN$&
Household and similar electrical applicances - Safety -- Part 2-48: Particular
requirements for commercial electric grillers and toasters
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-48:
Besondere Anforderungen für elektrische Strahlungsgrillgeräte und Toaster für den
gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-48: Règles particulières
pour les grils et grille-pain électriques à usage collectif
Ta slovenski standard je istoveten z: EN 60335-2-48:2003
ICS:
97.040.20 âWHGLOQLNLGHORYQLSXOWL Cooking ranges, working
SHþLFHLQSRGREQLDSDUDWL tables, ovens and similar
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-48
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2003
ICS 97.040.50 Supersedes EN 60335-2-48:2000
Incorporates Corrigendum September 2007

English version
Household and similar electrical applicances –
Safety
Part 2-48: Particular requirements for
commercial electric grillers and toasters
(IEC 60335-2-48:2002)
Appareils électrodomestiques  Sicherheit elektrischer Geräte für den
et analogues – Hausgebrauch und ähnliche Zwecke
Sécurité Teil 2-48: Besondere Anforderungen
Partie 2-48: Règles particulières für elektrische Strahlungsgrillgeräte und
pour les grils et grille-pain électriques Toaster für den gewerblichen Gebrauch
à usage collectif (IEC 60335-2-48:2002)
(CEI 60335-2-48:2002)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60335-2-48:2003 E
Foreword
The text of document 61E/409/FDIS, future fourth edition of IEC 60335-2-48, prepared by SC 61E of the
IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60335-2-48 on 2003-02-01.
This European Standard replaces EN 60335-2-48:2000.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-11-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2006-02-01
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances –
Safety – Part 1: General requirements. It was established on the basis of the 2002 edition of that standard.
Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes
become applicable will be stated in the relevant amendment or revision of Part 1.
This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the
European Standard: Safety requirements for commercial electric grillers and toasters.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text of
Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
- additional annexes are lettered AA, BB, etc.;
- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
The contents of the corrigendum of September 2007 have been included in this copy.
p NOTE  In this document, p is used in the margin to indicate instructions for preparing the printed version.
_____________
- 3 - EN 60335-2-48:2003
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that
the risks are mainly of electrical origin and consequently this directive is not applicable. However, the
relevant essential safety requirements of the Machinery Directive are covered by this standard together
with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-48:2002 was approved by CENELEC as a European
Standard without any modification.
____________
IEC 60335-2-48
Edition 3.0 2002-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-48: Particular requirements for commercial electric grillers and toasters

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-48: Règles particulières pour les grils et grille-pain électriques à usage
collectif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
Q
CODE PRIX
ICS 97.040.50 ISBN 2-8318-7920-5
60335-2-48 © IEC:2002 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references .11
3 Definitions .11
4 General requirement.13
5 General conditions for the tests .13
6 Classification.15
7 Marking and instructions.15
8 Protection against access to live parts.17
9 Starting of motor-operated appliances .19
10 Power input and current .19
11 Heating .19
12 Void.21
13 Leakage current and electric strength at operating temperature.21
14 Transient overvoltages .21
15 Moisture resistance .21
16 Leakage current and electric strength.23
17 Overload protection of transformers and associated circuits .23
18 Endurance.23
19 Abnormal operation .25
20 Stability and mechanical hazards .25
21 Mechanical strength .25
22 Construction .27
23 Internal wiring.27
24 Components .29
25 Supply connection and external flexible cords .29
26 Terminals for external conductors.29
27 Provision for earthing .31
28 Screws and connections .31
29 Clearances, creepage distances and solid insulation .31
30 Resistance to heat and fire.31
31 Resistance to rusting.33
32 Radiation, toxicity and similar hazards.33

Annexes .35
Annex N (normative) Proof tracking test.35

Bibliography.35

Figure 101 – Splash apparatus .33

60335-2-48 © IEC:2002 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-48: Particular requirements for commercial
electric grillers and toasters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparent
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.