EN 60974-6:2003
(Main)Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources
Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources
Specifies safety requirements for construction and performance requirements of welding power sources, limited to a rated maximum welding current of 160 A. These welding power sources are mainly used by laymen.
Lichtbogenschweißeinrichtungen - Teil 6: Schweißstromquellen mit begrenzter Einschaltdauer
Matériel de soudage à l'arc - Partie 6: Sources de courant de soudage manuel à l'arc metallique à service limité
Spécifie les exigences de sécurité pour la construction et les exigences de performance pour les sources de courant de soudage limité à un courant assigné maximal de soudage de 160 A. Ces sources de courant de soudage sont principalement utilisées par des non professionnels.
Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources
General Information
- Status
- Withdrawn
- Publication Date
- 03-Apr-2003
- Withdrawal Date
- 28-Feb-2006
- Technical Committee
- CLC/TC 26 - Electric welding
- Drafting Committee
- IEC/TC 26 - IEC_TC_26
- Parallel Committee
- IEC/TC 26 - IEC_TC_26
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jan-2014
- Completion Date
- 01-Jan-2014
Relations
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 60974-6:2003 is a standard published by CLC. Its full title is "Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources". This standard covers: Specifies safety requirements for construction and performance requirements of welding power sources, limited to a rated maximum welding current of 160 A. These welding power sources are mainly used by laymen.
Specifies safety requirements for construction and performance requirements of welding power sources, limited to a rated maximum welding current of 160 A. These welding power sources are mainly used by laymen.
EN 60974-6:2003 is classified under the following ICS (International Classification for Standards) categories: 25.160.30 - Welding equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60974-6:2003 has the following relationships with other standards: It is inter standard links to EN 50060:1989/A1:1994, EN 50060:1989, EN 60974-6:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60974-6:2003 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60974-6:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI SIST EN 60974-6:2003
STANDARD
oktober 2003
Arc welding equipment - Part 6: Limited duty manual metal arc welding power
sources
ICS 25.160.30 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60974-6
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 25.160.30
English version
Arc welding equipment
Part 6: Limited duty manual metal arc welding power sources
(IEC 60974-6:2003)
Matériel de soudage à l'arc Lichtbogenschweißeinrichtungen
Partie 6: Sources de courant de soudage Teil 6: Schweißstromquellen
manuel à l'arc metallique à service limité mit begrenzter Einschaltdauer
(CEI 60974-6:2003) (IEC 60974-6:2003)
This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-6:2003 E
Foreword
The text of document 26/247/FDIS, future edition 1 of IEC 60974-6, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-6 on 2003-03-01.
This Part 6 of EN 60974 is to be used in conjunction with EN 60974-1:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...