EN 288-3:1992/A1:1997
(Amendment)Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels
Arc welding is covered by the following processes in accordance with EN 24063: metal-arc welding with covered electrode; flux-cored metal-arc welding without gas shield; submerged arc welding with electrode; submerged arc welding with strip electrode; metal-arc inert gas welding, MIG welding; metal-arc active gas welding, MAG welding; flux-cored wire metal-arc welding with active gas shield; ...
Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe - Teil 3: Schweißverfahrensprüfungen für das Lichtbogenschweißen von Stählen
Das Lichtbogenschweißen umfaßt die folgenden Schweißprozesse nach EN 24063: Lichtbogenhandschweißen; Metall-Lichtbogenschweißen mit Fülldrahtelektrode; Unterpulverschweißen mit Drahtelektrode; Unterpulverschweißen mit Bandelektrode; Metall-Inertgasschweißen, MIG-Schweißen; Metall-Aktivgasschweißen, MAG-Schweißen; Metall-Aktivgasschweißen mit Fülldrahtelektrode;...
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Partie 3: Epreuve de qualification d'un mode opératoire de soudage à l'arc sur acier
Le soudage à l'arc comprend les procédés suivants conformément à l'EN ISO 4063: soudage manuel à l'arc avec électrode enrobée; soudage avec fil fourré auto protecteur; soudage à l'arc sous flux (en poudre); soudage à l'arc sous flux en poudre avec électrode en feuillard; soudage MIG (soudage à l'arc sous protection de gaz inerte avec fil électrode fusible); soudage MAG (soudage à l'arc sous protection de gaz actif avec fil électrode fusible); soudage MAG avec fil fourré;...
Popis in odobritev varilnih postopkov za kovinske materiale - 3. del: Preskusi varilnih postopkov za obločno varjenje jekel - Dopolnilo A1
General Information
- Status
- Withdrawn
- Publication Date
- 17-Jun-1997
- Withdrawal Date
- 14-Jun-2004
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Jun-2004
- Completion Date
- 15-Jun-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 21049:2004 - Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) - Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 288-3:1992/A1:1997 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steels". This standard covers: Arc welding is covered by the following processes in accordance with EN 24063: metal-arc welding with covered electrode; flux-cored metal-arc welding without gas shield; submerged arc welding with electrode; submerged arc welding with strip electrode; metal-arc inert gas welding, MIG welding; metal-arc active gas welding, MAG welding; flux-cored wire metal-arc welding with active gas shield; ...
Arc welding is covered by the following processes in accordance with EN 24063: metal-arc welding with covered electrode; flux-cored metal-arc welding without gas shield; submerged arc welding with electrode; submerged arc welding with strip electrode; metal-arc inert gas welding, MIG welding; metal-arc active gas welding, MAG welding; flux-cored wire metal-arc welding with active gas shield; ...
EN 288-3:1992/A1:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 288-3:1992/A1:1997 has the following relationships with other standards: It is inter standard links to EN ISO 15614-1:2004, EN 1252-2:2001, EN ISO 13710:2004, EN 13814:2004, EN 12063:1999, EN ISO 21049:2004, EN 288-3:1992. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 288-3:1992/A1:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1999
3RSLVLQRGREULWHYYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOHGHO 3UHVNXVL
YDULOQLKSRVWRSNRY]DREORþQRYDUMHQMHMHNHO'RSROQLOR$
Specification and approval of welding procedures for metallic materials - Part 3: Welding
procedure tests for the arc welding of steels
Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe - Teil 3:
Schweißverfahrensprüfungen für das Lichtbogenschweißen von Stählen
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Partie 3: Epreuve de qualification d'un mode opératoire de soudage a l'arc
sur acier
Ta slovenski standard je istoveten z: EN 288-3:1992/A1:1997
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...