Electronic fee collection - Interoperability application profile for DSRC

The scope for this European Standard is limited to:
-   payment method: Central account based on EFC-DSRC;
-   physical systems: OBU, RSE and the DSRC interface between them (all functions and information flows related to these parts);
-   DSRC-link requirements;
-   EFC transactions over the DSRC interface;
-   data elements to be used by OBU and RSE used in EFC-DSRC transactions;
-   security mechanisms for OBU and RSE used in EFC-DSRC transactions.
The scope of this European Standard is illustrated in Figure 1.
It is outside the scope of this European Standard to define:
-   contractual and procedural interoperability requirements (including issues related to a Memorandum of Understanding, MoU);
-   conformance procedures and test specification (this is provided in a separate set of standards);
-   setting-up of operating organizations (e.g. toll charger, toll service provider, trusted third party, etc.);
-   legal issues;
-   other payment methods in DSRC-based EFC (e.g. on-board accounts using integrated circuit cards);
-   other basic technologies (e.g. GNSS/CN or video registration based EFC). However, this European Standard may be used for defining the DSRC-EFC parts for the use in applications that implement a mix of different technologies;
-   non-EFC transactions over the DSRC interface (e.g. CCC and LAC communication, which is defined in other standards);
-   other interfaces or functions in EFC-systems than those specified above (i.e. information flows and data exchange between operators or personalization, initialization and customization of the OBU).
Some of these issues are subject to separate standards prepared by CEN/TC 278, ISO/TC 204 or ETSI ERM.
Figure 2 shows the scope of this European Standard from a DSRC-stack perspective.

Elektronische Gebührenerhebung - Anwendungsprofil für DSRC Interoperabilität

Perception de télépéage - Profil d'application d'interopérabilité pour DSRC

Le domaine d’application de la présente Norme européenne est limité :
—   au mode de paiement : compte centralisé basé sur l’EFC-DSRC ;
—   aux systèmes physiques : OBU, RSE et l’interface DSRC qui les relie (toutes les fonctions et les flux des informations relatifs à ces parties) ;
—   aux exigences de liaison DSRC ;
—   aux transactions EFC via l’interface DSRC ;
—   aux éléments de données à utiliser par l’OBU et le RSE utilisés dans les transactions EFC-DSRC ;
—   aux mécanismes de sécurité pour l’OBU et le RSE utilisés dans les transactions EFC-DSRC.
Le domaine d'application de cette Norme européenne est illustré à la Figure 1.
La définition des points suivants est exclue du domaine d’application de la présente Norme européenne :
—   les exigences d’interopérabilité contractuelle et procédurale (y compris les questions relatives à un mémorandum d’accord, MoU) ;
—   les procédures de conformité et les spécifications d’essais (elles sont fournies dans un ensemble de normes distinct) ;
—   la mise en place d’organismes opérationnels (par exemple, opérateur de compensation, émission, tiers de confiance, etc.) ;
—   les questions légales ;
—   les autres modes de paiement EFC reposant sur des DSRC (par exemple, comptes embarqués basés sur des cartes à puce) ;
—   les autres technologies de base (par exemple, GNSS/CN ou EFC basée sur l’enregistrement vidéo). La présente Norme européenne peut cependant servir à définir les parties DSRC-EFC destinées à être utilisées dans des applications qui mettent en œuvre une combinaison de différentes technologies ;
—   les autres modes de paiement EFC reposant sur des DSRC (par exemple, comptes embarqués basés sur des cartes à puce) ;
—   des interfaces ou fonctions, incluses dans des installations EFC, autres que celles spécifiées ci-dessus (c’est-à-dire flux des informations et échanges de données entre opérateurs ou personnalisation, initialisation et adaptation de l’OBU).
Certaines de ces questions font l’objet de normes distinctes élaborées par le CEN/TC 278, l’ISO/TC 204 ou l’ETSI ERM.
La Figure 2 illustre le domaine d'application de la présente Norme européenne du point de vue de pile de protocoles DSRC.

Elektronsko pobiranje pristojbin - Interoperabilnost profila aplikacije za DSRC

Področje uporabe tega evropskega standarda zajema le
– plačilno metodo: centralni obračun, ki temelji na posebni komunikaciji kratkega dosega za elektronsko pobiranje pristojbin (EFC-DSRC),
– fizične sisteme: OBU, RSE in vmesnik DSRC med njima (vse funkcije in informacijski tokovi, povezani s temi deli),
– zahteve za povezavo DSRC,
– transakcije EFC nad vmesnikom DSRC,
– podatkovne elemente, ki jih uporabljata sistema OBU in RSE, ki se uporabljata pri transakcijah EFC-DSRC,
– varnostne mehanizme za sistema OBU in RSE, ki se uporabljata pri transakcijah EFC-DSRC.
Področje uporabe tega evropskega standarda je prikazano na sliki 1.
Področje uporabe tega evropskega standarda ne zajema določanja
– pogodbenih in postopkovnih zahtev za medobratovalnost (vključno z vprašanji, povezanimi z memorandumom o soglasju),
– postopkov za skladnost in specifikacije preskusa (to zagotavlja ločen sklop standardov),
– vzpostavljanja obratovalnih organizacij (npr. upravljavec za poravnavo, izdajanje, zaupanja vredna tretja oseba itd.),
– pravnih vprašanj,
– drugih plačilnih metod pri elektronskem pobiranju pristojbin na podlagi DSRC (npr. obračuni pristojbin s karticami z integriranim vezjem),
– drugih osnovnih tehnologij (npr. GNSS/CN ali elektronsko pobiranje pristojbin na podlagi videobeleženja). Vendar se lahko ta evropski standard uporabi za določanje delov DSRC-EFC za uporabo v aplikacijah, v okviru katerih se izvaja skupek različnih tehnologij,
– vmesnikov ali funkcij v sistemih elektronskega pobiranja pristojbin, ki niso opredeljeni zgoraj (tj. informacijski tokovi in izmenjava podatkov med upravljavci ali personalizacija, inicializacija ter prilagoditev OBU).
Nekatera od teh vprašanj so obravnavana v ločenih standardih, ki jih je pripravil tehnični odbor CEN/TC 278, ISO/TC 204 ali ETSI ERM.
Slika 2 prikazuje področje uporabe tega evropskega standarda z vidika DSRC.
Ta evropski standard določa profil aplikacije na podlagi koncepta ISP. Osnovni standardi, na katerih temelji ta profil aplikacije, so
– EN ISO 14906 o definiciji vmesnika aplikacije elektronskega pobiranja pristojbin za DSRC (to vključuje posredna sklicevanja na standard EN ISO 14816 o strukturah oštevilčenja in podatkov),
– EN 12834: o aplikacijski plasti DSRC (L7),
– EN 13372 o profilih DSRC (to vključuje posredna sklicevanja na standarde DSRC L1, L2 in L7: EN 12253, EN 12795 in EN 12834).
Povezava in reference med osnovnimi standardi in standardom EN 15509 so prikazani na sliki 3.

General Information

Status
Withdrawn
Publication Date
02-Sep-2014
Withdrawal Date
28-Mar-2023
Current Stage

Relations

Buy Standard

Standard
EN 15509:2014
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 15509:2014 - natisnjeno za čitalnico
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2014
Nadomešča:
SIST EN 15509:2008
Elektronsko pobiranje pristojbin - Interoperabilnost profila aplikacije za DSRC
Electronic fee collection - Interoperability application profile for DSRC
Elektronische Gebührenerhebung - Interoperable Anwendungsprofile für DSRC
Perception de télépéage - Profil d'application d'interopérabilité pour DSRC
Ta slovenski standard je istoveten z: EN 15509:2014
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 15509
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 35.240.60 Supersedes EN 15509:2007
English Version
Electronic fee collection - Interoperability application profile for
DSRC
Perception de télépéage - Profil d'application Elektronische Gebührenerhebung - Anwendungsprofil für
d'interopérabilité pour DSRC DSRC Interoperabilität
This European Standard was approved by CEN on 18 July 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15509:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .5
Introduction .7
1 Scope .9
2 Normative references . 11
3 Terms and definitions . 11
4 Symbols and abbreviations . 14
5 Conformance . 16
5.1 General . 16
5.2 Base standards . 16
5.3 Main contents of an EFC-DSRC-IAP . 17
5.4 Conformance requirements . 18
5.5 Conformation notification . 18
5.6 Conformance evaluation and testing. 18
5.7 Multiple IAPs . 18
6 Requirements for EFC-DSRC-IAP 1 . 18
6.1 OBU requirements . 18
6.1.1 General . 18
6.1.2 DSRC requirements . 18
6.1.3 DSRC L7 and EFC functions . 19
6.1.4 Data requirements . 19
6.1.5 Security requirements . 21
6.1.6 Transaction requirements . 22
6.2 RSE requirements . 22
6.2.1 General . 22
6.2.2 DSRC requirements . 22
6.2.3 DSRC L7 and EFC functions . 22
6.2.4 Data requirements . 23
6.2.5 Security requirements . 23
6.2.6 Transaction requirements . 24
Annex A (normative) Data specification . 25
Annex B (normative) Security calculations . 29
B.1 General . 29
B.2 Attribute authenticator . 29
B.2.1 General . 29
B.2.2 Authenticator using the attribute Payment Means . 30
B.3 Access Credentials . 32
B.3.1 General . 32
B.3.2 The principle of Access Credentials . 32
B.3.3 Calculation of Access Credentials . 33
B.4 Key derivation . 34
B.4.1 General . 34
B.4.2 Calculation of derived Authentication Key . 34
B.4.3 Calculation of the Access Key . 34
B.5 Transaction Counter . 35
Annex C (normative) Implementation conformance statement proforma . 36
C.1 General . 36
C.2 Guidance for completing the ICS proforma . 36
C.2.1 Purposes and structure . 36
C.2.2 Abbreviations and conventions . 36
C.3 Instructions for completing the ICS proforma. 38
C.4 ICS proforma for OBU . 38
C.4.1 Identification implementation . 38
C.4.2 Identification of the standard . 39
C.4.3 Global statement of conformance . 39
C.4.4 ICS proforma for OBU . 39
C.4.5 Profile requirements list for OBU . 41
C.5 ICS proforma for RSE . 45
C.5.1 Identification implementation . 45
C.5.2 Identification of the standard . 45
C.5.3 Global statement of conformance . 45
C.5.4 ICS proforma for RSE . 45
C.5.5 Profile requirements list for RSE . 48
Annex D (informative) IAP taxonomy and numbering . 52
D.1 General . 52
D.2 Contents of an Interoperable Application Profile (IAP) . 52
D.3 IAP referencing and numbering . 53
D.3.1 IAP numbering . 53
D.3.2 Security levels numbering . 53
D.3.3 Numbering and referencing examples . 53
Annex E (informative) Security computation examples . 54
E.1 General . 54
E.2 Computation of Attribute Authenticator . 54
E.3 Computation of Access Credentials . 55
E.4 Key derivation . 55
E.4.1 Authenticator Key . 55
E.4.2 Access Credentials Key . 56
Annex F (informative) Security Considerations . 57
Annex G (informative) Interlayer management . 58
G.1 General . 58
G.2 RSE Inter Layer Management guidelines .
...


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektronsko pobiranje pristojbin - Medobratovalnost profila aplikacije za DSRCElektronische Gebührenerhebung - Interoperable Anwendungsprofile für DSRCPerception de télépéage - Profil d'application d'interopérabilité pour DSRCElectronic fee collection - Interoperability application profile for DSRC35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and trade03.220.20Cestni transportRoad transportICS:Ta slovenski standard je istoveten z:EN 15509:2014SIST EN 15509:2014en,fr,de01-december-2014SIST EN 15509:2014SLOVENSKI
STANDARDSIST EN 15509:20081DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15509
September 2014 ICS 35.240.60 Supersedes EN 15509:2007English Version
Electronic fee collection - Interoperability application profile for DSRC
Perception de télépéage - Profil d'application d'interopérabilité pour DSRC
Elektronische Gebührenerhebung - Anwendungsprofil für DSRC Interoperabilität This European Standard was approved by CEN on 18 July 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15509:2014 ESIST EN 15509:2014

Data specification . 25 Annex B (normative)
Security calculations . 29 B.1 General . 29 B.2 Attribute authenticator . 29 B.2.1 General . 29 B.2.2 Authenticator using the attribute Payment Means . 30 B.3 Access Credentials . 32 B.3.1 General . 32 B.3.2 The principle of Access Credentials . 32 B.3.3 Calculation of Access Credentials . 33 B.4 Key derivation . 34 B.4.1 General . 34 SIST EN 15509:2014

Implementation conformance statement proforma . 36 C.1 General . 36 C.2 Guidance for completing the ICS proforma . 36 C.2.1 Purposes and structure . 36 C.2.2 Abbreviations and conventions . 36 C.3 Instructions for completing the ICS proforma. 38 C.4 ICS proforma for OBU . 38 C.4.1 Identification implementation . 38 C.4.2 Identification of the standard . 39 C.4.3 Global statement of conformance . 39 C.4.4 ICS proforma for OBU . 39 C.4.5 Profile requirements list for OBU . 41 C.5 ICS proforma for RSE . 45 C.5.1 Identification implementation . 45 C.5.2 Identification of the standard . 45 C.5.3 Global statement of conformance . 45 C.5.4 ICS proforma for RSE . 45 C.5.5 Profile requirements list for RSE . 48 Annex D (informative)
IAP taxonomy and numbering . 52 D.1 General . 52 D.2 Contents of an Interoperable Application Profile (IAP) . 52 D.3 IAP referencing and numbering . 53 D.3.1 IAP numbering . 53 D.3.2 Security levels numbering . 53 D.3.3 Numbering and referencing examples . 53 Annex E (informative)
Security computation examples . 54 E.1 General . 54 E.2 Computation of Attribute Authenticator . 54 E.3 Computation of Access Credentials . 55 E.4 Key derivation . 55 E.4.1 Authenticator Key . 55 E.4.2 Access Credentials Key . 56 Annex F (informative)
Security Considerations . 57 Annex G (informative)
Interlayer management . 58 G.1 General . 58 SIST EN 15509:2014

Mounting guidelines for the OBU . 64 H.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.