EN ISO 19403-5:2020

SLOVENSKI STANDARD
01-april-2020
Barve in laki - Omočljivost - 5. del: Določevanje polarnega in disperznega dela
površinske napetosti tekočin prek merjenja stičnih kotov na trdnih telesih s samo
disperznim delom površinske energije (ISO 19403-5:2017)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive
fractions of the surface tension of liquids from contact angles measurements on a solid
with only a disperse contribution to its surface energy (ISO 19403-5:2017)
Beschichtungsstoffe - Benetzbarkeit - Teil 5: Bestimmung des polaren und dispersen
Anteils der Oberflächenspannung von Flüssigkeiten aus Kontaktwinkelmessungen auf
einem Festkörper mit rein dispersem Anteil der Oberflächenenergie (ISO 19403-5:2017)
Peintures et vernis - Mouillabilité - Partie 5: Détermination des fractions polaires er
disperses de la tension superficielle des liquides à partir de l'angle de contact avec un
solide n'ayant qu'une contribution de dispersion à son énergie de surface (ISO 19403-
5:2017)
Ta slovenski standard je istoveten z: EN ISO 19403-5:2020
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19403-5
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 01.040.87
English Version
Paints and varnishes - Wettability - Part 5: Determination
of the polar and dispersive fractions of the surface tension
of liquids from contact angles measurements on a solid
with only a disperse contribution to its surface energy (ISO
19403-5:2017)
Peintures et vernis - Mouillabilité - Partie 5: Beschichtungsstoffe - Benetzbarkeit - Teil 5:
Détermination des fractions polaires er disperses de la Bestimmung des polaren und dispersen Anteils der
tension superficielle des liquides à partir de l'angle de Oberflächenspannung von Flüssigkeiten aus
contact avec un solide n'ayant qu'une contribution de Kontaktwinkelmessungen auf einem Festkörper mit
dispersion à son énergie de surface (ISO 19403- rein dispersem Anteil der Oberflächenenergie (ISO
5:2017) 19403-5:2017)
This European Standard was approved by CEN on 4 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19403-5:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 19403-5:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19403-5:2017 has been approved by CEN as EN ISO 19403-5:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 19403-5
First edition
2017-06
Paints and varnishes — Wettability —
Part 5:
Determination of the polar and
dispersive fractions of the surface
tension of liquids from contact
angles measurements on a solid with
only a disperse contribution to its
surface energy
Peintures et vernis — Mouillabilité —
Partie 5: Détermination des fractions polaires er disperses de la tension
superficielle des liquides à partir de l’angle de contact avec un solide
n’ayant qu’une contribution de dispersion à son énergie de surface
Reference number
ISO 19403-5:2017(E)
©
ISO 2017
ISO 19403-5:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 19403-5:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reference solid . 2
6 Sampling . 2
7 Procedure. 2
7.1 Test conditions . 2
7.2 Determination of the surface tension of the liquid to be tested . 2
7.3 Determination of the surface free energy of the reference solid . 3
7.4 Determination of the contact angle of the liquid to be tested on the reference solid . 3
8 Evaluation . 3
8.1 General . 3
8.2 Owens-Wendt-Rabel-Kaelble method (OWRK method) . 3
8.3 Wu method . 4
8.4 Calculation of the polar fraction of the surface tension of the liquid . 4
9 Precision . 4
10 Test report . 4
Bibliography . 6
ISO 19403-5:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical stan
...