01.040.87 - Paint and colour industries (Vocabularies)

This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

The ISO 19403 series specifies optical test methods
- for the measurement of the contact angle,
- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
- for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The ap...view more

ISO 19403-7:2017 specifies a method for the dynamic measurement of the roll-off angle of a liquid drop on a solid surface. From the dynamic measurement, the advancing and receding angles of the drop rolling off can also be determined. The roll-off angle plays a role when evaluating, for example, easy-to-clean or anti-adherent surfaces.

ISO 19403-3:2017 specifies a test method to measure the surface tension of liquids with an optical method using the pendant drop. The method can be applied for the characterization of liquid coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1].
NOTE For other methods to determine the surface tension, see e.g. EN 14370 and ISO 1409.
[1] This term is defined in DIN 1342-1.

ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-5:2017 assumes that the information of surface tension of the liquid to be tested and the surface free energy of the dispersive reference solids is known.
[1] This term is defined in D...view more

ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the characterization of substrates and coatings.
NOTE 1 For the determination of the surface free energy of polymers and coatings, either the method in accordance with Owens, Wendt, Rabel and Kaelble or the method in accordance with Wu is used preferably.
NOTE 2 The morphological and chemical homogeneity have an influence on th...view more

The ISO 19403 series specifies optical test methods
- for the measurement of the contact angle,
- for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
- for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
- for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The ap...view more

ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined.
By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.

ISO 19403-4:2017 specifies a test method to determine the polar and dispersive fraction of the surface tension of liquids with optical methods. The method can be applied for the characterization of liquid coating materials, especially when drying effects occur during measurement. The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-4:2017 assumes that the information of surface tension of the liquid to be tested, as well as at least one suitable reference li...view more

This document defines terms for electro-deposition coatings. It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

This document defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are
given, relating to their use in coating materials.

This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.

This document defines terms that are used in the field of pigments, dyestuffs and extenders.
For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.

This document defines special terms used in the field of coating powders.
Other terms and definitions related to paints and varnishes are given in ISO 4618.

This document defines terms that are used in the field of pigments, dyestuffs and extenders. For some terms, reference is made to ISO 4618 in which also terms and definitions for colourants are given, relating to their use in coating materials.

This document defines special terms used in the field of coating powders. Other terms and definitions related to paints and varnishes are given in ISO 4618.

This document applies to the industry producing colouring materials and the consumer who uses the
products of this industry. In this document, the colouring materials are classified in accordance with
colouristic and chemical aspects.
Some dyestuffs for use in the ceramics and food industries are listed as examples.

ISO 19403-2:2017 specifies a test method to measure the contact angle for the determination of the surface free energy of a solid surface. The method can be applied for the characterization of substrates and coatings. NOTE 1 For the determination of the surface free energy of polymers and coatings, either the method in accordance with Owens, Wendt, Rabel and Kaelble or the method in accordance with Wu is used preferably. NOTE 2 The morphological and chemical homogeneity have an influence on the ...view more

ISO 19403-5:2017 specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials. The applicability can be restricted for liquids with non-Newtonian rheology[1]. ISO 19403-5:2017 assumes that the information of surface tension of the liquid to be tested and the surface free energy of the dispersive reference solids is known. [1] This term is defined in DIN ...view more

ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined. By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.