iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 17984-1

(Main)

Assistance dogs - Part 1: Vocabulary

Assistance dogs - Part 1: Vocabulary

This document specifies the terms and definitions that apply to:
-   different types of assistance dogs;
-   the beneficiary and client services;
-   health and disabilities;   
-   assistance dog service providers;   
-   assistance dog training staff and related professionals;
-   the socialization and training processes;
-   conformity assessment, identification and registration;
-   accessibility.

Assistenzhunde - Teil 1: Begriffe

In diesem Dokument werden die Begriffe festgelegt, die gelten für:
-   die verschiedenen Arten von Assistenzhunden;
-   den Nutznießer und die Kundendienstleistungen;
-   Gesundheit und Behinderungen;
-   Assistenzhunddienstleister;
-   das Personal für die Ausbildung von Assistenzhunden und die entsprechenden Fachkräfte;
-   die Sozialisierungs- und Ausbildungsprozesse;
-   Konformitätsbewertung, Identifizierung und Registrierung;
-   Barrierefreiheit.

Chiens d’assistance - Partie 1 : Vocabulaire

Le présent document spécifie les termes et définitions s’appliquant :
-   aux différents types de chiens d’assistance ;
-   aux services fournis au bénéficiaire et au client ;
-   à la santé et aux handicaps ;   
-   aux prestataires de services de chien d’assistance ;   
-   au personnel d’éducation des chiens d’assistance et autres professionnels concernés ;
-   aux processus de socialisation et d’éducation ;
-   à l’évaluation de la conformité, identification et enregistrement ;
-   à l’accessibilité.

Psi pomočniki - 1. del: Slovar

General Information

Status
Not Published
Publication Date
21-Oct-2024
ICS
01.040.03 - Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies)
03.080.99 - Other services
11.180.99 - Other standards related to aids for disabled and handicapped people
65.020.30 - Animal husbandry and breeding
Technical Committee
CEN/TC 452 - Assistance Dog & Guide Dog Teams Standards and Instructors Competences
Drafting Committee
CEN/TC 452/WG 1 - Terminology
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
09-Feb-2024
Due Date
23-Apr-2024
Completion Date
09-Feb-2024
Ref Project
oSIST prEN 17984-1:2023 - Assistance dogs - Part 1: Vocabulary

Buy Standard

prEN 17984-1:2023prEN 17984-1:2023
PreviousNext
Draft
prEN 17984-1:2023
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17984-1:2023
01-junij-2023
Psi pomočniki - 1. del: Slovar
Assistance dogs - Part 1: Vocabulary
Assistenzhunde - Begriffe
Ta slovenski standard je istoveten z: prEN 17984-1
ICS:
03.080.99 Druge storitve Other services
11.180.99 Drugi standardi v zvezi s Other standards related to
pripomočki za invalide aids for disabled and
handicapped people
oSIST prEN 17984-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17984-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN 17984-1:2023


DRAFT
EUROPEAN STANDARD
prEN 17984-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 11.180.99; 65.020.30
English Version

Assistance dogs - Part 1: Vocabulary
 Assistenzhunde - Begriffe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 452.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17984-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17984-1:2023
prEN 17984-1:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
Annex A (normative) Additional vocabulary for other types of dogs . 28
Annex B (informative) Infographic: different types of assistance dogs . 29
Bibliography . 31

2

---------------------- Page: 4 ----------------------
oSIST prEN 17984-1:2023
prEN 17984-1:2023 (E)
European foreword
This document (prEN 17984-1:2023) has been prepared by Technical Committee CEN/TC 452
“Assistance Dogs”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document is part of a series of European Standards under the general title Assistance Dogs, which
will comprise the following parts:
— Part 1: Vocabulary
— Part 2: Lifetime welfare
— Part 3: Competencies for assistance dogs’ professionals
— Part 4: Pre-training, Training and Tasks
— Part 5: Client Services
— Part 6: Accessibility and Universal Access
— Part 7: Conformity assessment
3

---------------------- Page: 5 ----------------------
oSIST prEN 17984-1:2023
prEN 17984-1:2023 (E)
Introduction
Assistance dog (in some countries referred to as serv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 18335:2024(Main)
Petroleum products and related products - Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density - Method by constant pressure viscometer (ISO 18335:2024)
kSIST FprEN ISO 18335:2023

This document specifies a procedure for determining dynamic viscosity, η, and density, ρ, for the calculation of kinematic viscosity, ν, of middle distillate fuels, fatty acid methyl ester fuels (FAME) and mixtures thereof, up to 60 % with middle distillate fuels, and lubricating oils (e.g. base oils, formulated oils), and synthetics, using a constant pressure viscometer. The range of kinematic viscosities covered in this test method is from 0,5 mm2/s to 2 000 mm2/s, with precision at 40 °C from 1,0 mm2/s to 1 286 mm2/s, and precision at 100 °C from 3,0 mm2/s to 157 mm2/s.
The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). However, if the viscosity changes significantly with the shear rate, comparison with other measuring methods is only permissible at similar shear rates.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16110:2024(Main)
Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste
kSIST-TP FprCEN/TR 16110:2023

Ecotoxicity tests can be applied to wastes to identify their potential hazardous properties with respect to the environment or to assess the risk related to a site-specific exposure scenario. This document provides guidance for the selection and use of ecotoxicity tests for both applications.
This document focuses on the following selected field of applications:
a)   Basic ecotoxicological characterization;
b)   Site-specific exposure scenario;
c)   Landfill management:
1)   monitoring of leachates;
2)   mineral waste going to non-controlled landfill sites.
d)   Re-use of waste:
1)   use of sludge in agriculture;
2)   use of mineral waste in road construction.
The user should be aware that other fields of application can also be covered by ecotoxicological testing not being in the scope of the document. The ecotoxicological assessment of waste within other scenarios might need the development of other test strategies.
Depending on the waste type and the assessment goal, relevant criteria are described for the selection of a test strategy and the suitable ecotoxicity test(s).
This document also provides guidance for individual ecotoxicity test protocols to meet the specific demands of waste testing (e.g. limitations, test design, confounding factors).The tests recommended represent a minimum test battery that may be accomplished by additional tests or even be replaced by others according to the waste, the intended use or protection goal envisaged.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7510:2024(Main)
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
oSIST prEN ISO 7510:2023

ISO 7510:2017 specifies a method for the determination of constituent materials of a test sample cut from a glass-reinforced plastics (GRP) component intended for use in a piping system. It includes determination of resin, glass, aggregate and filler contents.
It is also applicable to the determination of the type and arrangement of the reinforcements. If used to determine the amounts of constituent materials in layered constructions it may be necessary to separate the laminate layers by cutting or splitting and testing each separately.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10364:2024(Main)
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2024)
kSIST FprEN ISO 10364:2023

This document specifies methods for determining the pot life of multi-part adhesives, in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
The different methods described in this document to measure the property do not necessarily provide identical results.
The test methods described are suitable for assessing all multi–part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1       Some of the methods described in this document can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2       This document can also be used for assessing non-structural adhesives.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12201-2:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
kSIST FprEN 12201-2:2023

This document specifies the characteristics of pipes made from polyethylene (PE) for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drains and sewers under pressure, vacuum sewer systems, and water for other purposes, with the exception of industrial application.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment, attention is drawn to 6.3 of this document. Components manufactured for water for general purposes, drains and sewers, and vacuum sewer systems are possibly not suitable for water supply for human consumption.
NOTE 2   Industrial application is covered by EN ISO 15494 [4].
The intended uses include sea outfalls, laid in water and pipes suspended below bridges.
For use in contaminated soils special consideration is taken for pipes intended for the transport of water intended for human consumption or raw water prior to treatment.
NOTE 3   Pipes constructions including barrier layers are not covered by this document. ISO 21004 provides an alternative solution for use in contaminated soils [10].
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with EN 12201-1, EN 12201-3, EN 12201-4 and EN 12201-5, this document is applicable to PE pipes, fitting and valves, their joints and joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar  ;
b)   an operating temperature of 20 °C as a reference temperature.
NOTE 4   For applications operating at constant temperatures greater than 20 °C and up to and including 50 °C, see EN 12201-1:2024, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours.
This document is applicable to three types of pipes:
—   PE pipes (outside diameter dn) including any identification stripes;
—   PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside diameter dn) as specified in Annex B, where all PE layers have the same MRS rating;
—   PE pipes (outside diameter dn) with a peelable and contiguous thermoplastics additional layer on the outside of the pipe (“coated pipe”) as specified in Annex C.
NOTE 5   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
NOTE 6   Assessment of the resistance to slow crack growth of the PE pipe compound used for the manufacture of products conforming to this document is required in accordance with EN 12201-1:2024, Table 2.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12201-5:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
kSIST FprEN 12201-5:2023

This document specifies the requirements of fitness for purpose of assembled polyethylene (PE) piping systems intended for the conveyance of water intended for human consumption, raw water prior to treatment, drains and sewers under pressure, vacuum sewer systems, and water for other purposes, with the exception of industrial application.
It specifies the requirements for electrofusion, socket fusion, butt fusion and mechanical joints.
It specifies the method of preparation of test piece joints, and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment attention is drawn to the introduction of this document. Components manufactured for water for other purposes, drains and sewers, and vacuum systems, are possibly not suitable for water supply for human consumption.
NOTE 2   Industrial application is covered by EN ISO 15494 [2].
The intended use includes sea outfalls, laid in water and pipes suspended below bridges.
It also specifies the test parameters for the test methods referred to in this document.
This document is intended to only be used by the product manufacturer to assess the performance of components in accordance with EN 12201 2, EN 12201 3, or EN 12201 4 when joined together under normal and extreme conditions in accordance with this document. It is not intended for on-site testing of pipe systems.
In conjunction with EN 12201-1, EN 12201 2, EN 12201 3 and EN 12201 4 this document is applicable to PE pipes, fittings and valves, their joints and joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar ;
b)   an operating temperature of 20 °C as a reference temperature for design purposes.
NOTE 3   For applications operating at constant temperatures greater than 20 °C up to and including 50 °C, see EN 12201-1:2024, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours.
NOTE 4   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12201-3:2024(Main)
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
kSIST FprEN 12201-3:2023

This document specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings for buried and above ground applications, intended for the conveyance of water for human consumption, raw water prior to treatment, drains and sewers under pressure, vacuum sewer systems, and water for other purposes, with the exception of industrial application.
NOTE 1   For PE components intended for the conveyance of water for human consumption and raw water prior to treatment, attention is drawn to subclause 6.6 of this document. Components manufactured for water for other purposes, drains and sewers, and vacuum sewer systems are possibly not suitable for water supply for human consumption.
NOTE 2   Industrial application is covered by EN ISO 15494 [4].
The intended uses include sea outfalls, laid in water and pipes suspended below bridges.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with EN 12201-1, EN 12201 2, EN 12201 4 and EN 12201 5, this document is applicable to PE pipes, fittings and valves, their joints and joints with components of PE and other materials intended to be used under the following conditions:
a)   allowable operating pressure, PFA, up to 25 bar  ;
b)   an operating temperature of 20 °C as a reference temperature.
NOTE 3   For applications operating at constant temperature greater than 20 °C and up to and including 50 °C, see EN 12201-1:2024, Annex A.
The EN 12201 series covers a range of allowable operating pressures and gives requirements concerning colours.
NOTE 4   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
These fittings can be of the following types:
—   electrofusion socket fittings;
—   electrofusion saddle fittings;
—   spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion);
—   socket fusion fittings (see Annex A);
—   mechanical fittings;
—   fabricated fittings (see Annex B).

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20567-4:2024(Main)
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)
oSIST prEN ISO 20567-4:2023

This document specifies a mobile method for evaluating the resistance of automotive finishes to chilled-iron grit projected onto the surface under test to simulate the effect of stone chipping.
Results from the test specified in this document are not comparable with results specified in ISO 20567-1.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20344:2021/A1:2024(Amendment)
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO 20344:2021/Amd 1:2024)
SIST EN ISO 20344:2022/oprA1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14373:2024(Main)
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2024)
kSIST FprEN ISO 14373:2023

This document specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic-coated or weldable non-metallic-coated low-carbon steel, comprising two or three sheets of metal, where the maximum single-sheet thickness of components to be welded is within the range 0,4 mm to 3,0 mm.
This document is applicable to welding of sheets of the same or unequal thickness, where the thickness ratio is less than or equal to 3:1.
Welding with the following types of equipment is within the scope of this document:
a)       pedestal welding equipment;
b)       portable welding guns;
c)        automatic welding equipment where the components are fed by robots or automatic feeding equipment;
d)       multi-spot-welding machines;
e)       robotic welding machines.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day