EN 572-9:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standardSteklo v stavbah - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 9. del Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Produits verriers de silicate sodo-calcique de base - Partie 9 : Evaluation de la conformité/Norme produitGlas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 9: Konformitätsbewertung/ProduktnormTa slovenski standard je istoveten z:EN 572-9:2004SIST EN 572-9:2005en81.040.20ICS:SLOVENSKI
STANDARDSIST EN 572-9:200501-marec-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 572-9October 2004ICS 81.040.20 English versionGlass in building - Basic soda lime silicate glass products - Part9: Evaluation of conformity/Product standardVerre dans la construction - Verre de silicate sodo-calciquede base - Partie 9: Evaluation de la conformitéGlas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 9: KonformitätsbewertungThis European Standard was approved by CEN on 27 May 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 572-9:2004: E

2 Contents Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Requirements.6 4.1 Conformity with the definition of basic soda lime silicate glass products.6 4.2 Determination of the characteristic’s performances.6 4.2.1 Characteristics of basic soda lime silicate glass.6 4.2.2 Determination of essential characteristics of basic soda lime silicate glass products.7 4.3 Durability.9 4.4 Characteristics other than those listed in 4.2.9 4.5 Dangerous substances.9 5 Evaluation of conformity.10 5.1 General.10 5.2 Initial type testing of the product (see 5.1, 2).10 5.2.1 General.10 5.2.2 Initial type testing if the product belongs to the group soda lime silicate glass, clear or tinted.11 5.2.3 Initial type testing of characteristic’s performances.12 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, 1a and b).12 5.4 Initial inspection of factory and of factory production control (see 5.1, 1c).12 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, 1c).13 6 Marking and/or labelling.14 6.1 General.14 6.2 Product marking.14 6.3 Product characteristics.14 6.4 “Characteristics/performance identification paper”.14 Annex A (normative)
Factory production control.15 A.1 Factory Production Control Requirements.15 A.1.1 General.15 A.1.2 Organisation.15 A.1.3 Control system.15 A.2 Marking.16 A.3 Inspection and testing tables of soda lime silicate glass products production.17 A.3.1 Information on tables A.1 to A.7.17 A.3.2 Use of proxy testing.17 Annex B (informative)
Provisions for voluntary involvement of third party(ies).32 B.1 General.32 B.2 Voluntary tasks for third parties.32 B.3 Marking and labelling.32 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of EU Construction Products Directive.33

1 Scope This document covers the evaluation of conformity and the factory production control of basic soda lime silicate glass products for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties EN 572-2, Glass in building - Basic soda lime silicate glass products - Part 2 Float glass EN 572-3, Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass EN 572-4, Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass EN 572-5, Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass EN 572-6, Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass EN 572-7, Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass EN 572-8, Glass in building - Basic soda lime silicate glass products - Part 8:
Supplied and final cut sizes EN 673, Glass in building – Determination of thermal transmittance (U value) – Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass
EN 12758, Glass in building - Glazing and airborne sound insulation – Product descriptions and determination of properties
prEN 13474, Glass in building - Design of glass panes EN 13501-1, Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests
...