iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12003:2008/AC:2009

(Corrigendum)

Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives

Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives

TC - Modifications regarding the quality of the four figures in the standard.

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-Klebstoffen

Colles à carrelage - Détermination de l'adhérence par cisaillement des colles réactives

Lepila za ploščice - Ugotavljanje strižne adhezijske trdnosti reakcijskih smolnih lepil

General Information

Status
Withdrawn
Publication Date
28-Apr-2009
Withdrawal Date
14-Feb-2017
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 67 - Ceramic tiles
Drafting Committee
CEN/TC 67/WG 3 - Adhesives and grouts for tiles
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Feb-2017
Ref Project
SIST EN 12003:2009/AC:2009 - Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives

Relations

Replaced By
EN 12004-2:2017 - Adhesives for ceramic tiles - Part 2: Test methods
Effective Date
22-Feb-2017
Corrects
EN 12003:2008 - Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
Effective Date
08-Jun-2022

Buy Standard

EN 12003:2009/AC:2009EN 12003:2009/AC:2009
PreviousNext
Corrigendum
EN 12003:2009/AC:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OHSLOMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-KlebstoffenColles à carrelage - Détermination de l'adhérence par cisaillement des colles réactivesAdhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives91.100.23Ceramic tiles83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12003:2008/AC:2009SIST EN 12003:2009/AC:2009en,fr,de01-julij-2009SIST EN 12003:2009/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12003:2008/AC
April 2009
Avril 2009
April 2009 ICS 91.100.10 English version Version Française Deutsche Fassung
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
Colles à carrelage - Détermination de l'adhérence par cisaillement des colles réactives
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-Klebstoffen This corrigendum becomes effective on 29 April 2009 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 29 avril 2009 pour incorporation dans les trois versions linguistiques officiel
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13888-2:2022(Main)
Grouts for ceramic tiles - Part 2: Test methods
SIST EN 13888-2:2022

This document specifies the methods for determining characteristics for grouts used in internal and external installation of ceramic tiles.
This document does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   Determination of flexural and compressive strength (9.1);
-   Determination of water absorption (9.2);
-   Determination of shrinkage (9.3);
-   Determination of resistance to abrasion (9.4);
-   Determination of chemical resistance (9.5).
Grouts for ceramic tiles can also be used for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This document can involve hazardous materials and operations. It is important that persons using this document are familiar with normal laboratory practice. This document does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13888-1:2022(Main)
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
SIST EN 13888-1:2022

This document is applicable to ceramic tile grouts for internal and external tile installations on walls and floors.
This document gives the terminology concerning the products, working methods (see Annex A), application properties, etc. for ceramic tile grouts.
This document specifies the performance requirements for cementitious and reaction resin grouts for ceramic tiles.
This document does not contain criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile grouts can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect these materials.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-2:2017(Main)
Adhesives for ceramic tiles - Part 2: Test methods
SIST EN 12004-2:2017

This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   determination of open time (8.1);
-   determination of slip (8.2);
-   determination of tensile adhesion strength for cementitious adhesives (8.3);
-   determination of shear adhesion strength of dispersion adhesives (8.4);
-   determination of shear adhesion strength of reaction resin adhesives (8.5);
-   determination of transverse deformation of cementitious adhesives (8.6).
NOTE   Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
SIST EN 12004-1:2017

This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the performance requirements for the adhesives for ceramic tiles.
It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles.
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12004-3(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
oSIST prEN 12004-3:2022

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14891-2(Main)
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 2: Terminology, specifications, designation and marking
oSIST prEN 14891-2:2022

This document applies to all liquid-applied water impermeable products, based on polymer modified cementitious mortars, dispersions and reaction resin coatings, used beneath ceramic tiling, for external tile installations on walls and floors and in swimming pools.
This document specifies the test methods and the requirements for the non-harmonised characteristic and the designation and marking of liquid-applied water impermeable products beneath ceramic tiling.
This document does not contain recommendations for the design and installation of ceramic tiles and grouts in combination with water impermeable products.
NOTE   Liquid-applied water impermeable products are also used beneath other types of tiles (natural and agglomerated stones, etc.), where they do not adversely affect these materials.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12004-1(Main)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
kSIST FprEN 12004-1:2020

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10426-5:2024(Main)
Oil and gas industries including lower carbon energy - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations (ISO 10426-5:2024)
kSIST FprEN ISO 10426-5:2024

This document provides the methods for the testing of well cement formulations to determine the dimension changes during the curing process (cement hydration) at atmospheric and elevated pressure and the stress generated by expansion in a confined environment under elevated temperature and pressure.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 480-6:2024(Main)
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
SIST EN 480-6:2024

This document specifies a method for identifying an admixture by infrared analysis (IR).

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17328:2024(Main)
Complementary product category rules for gypsum-based construction products
SIST EN 17328:2024

This document provides product category rules (c-PCR), that are complementary to EN 15804:2012+A2:2019, for Type III environmental declarations for gypsum-based products for the construction industry.
This document:
—   specifies the functional and/or declared unit to be used;
—   defines the default system boundaries for gypsum-based construction products;
—   defines allocation procedures for the environmental impact of recycling and/or the use of by-products;
—   describes the default scenarios and rules for defining scenarios for each of the life cycle information modules A-D;
—   provides guidance for the determination of the reference service life (RSL) for gypsum-based construction products.
NOTE 1   Annex B of EN 15804:2012+A2:2019 has been complemented in an annex to this document.
NOTE 2   An Annex F has been added to this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day